Image
Product
Price
- B8 5100-Shock Absorber
- w/0 - 1.75 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5100 Shock Absorber
- Product Attributes:
- Boot Included: Black Bellows
- Collapsed Length:
- 251mm
- 9.880 In.
- Internal Design: Monotube
- Lower Mount Type: Eye Crossbar
- Upper Mount Type: Stem
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Extended Length:
- 14.630 In.
- 371.5mm
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
-
Features:
- Bilstein B8 5100 Shock Absorbers
- Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ram 1500 | V | - | Front | 8 Cyl 5.7L | Laramie Longhorn | RWD | 345 |
- B6 4600-Shock Absorber
- w/0 in. Lift/Drop;
- 46mm Monotube Shock Absorber
- 4600 Series Shock Absorber
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 14.1mm
- Upper Mount Type: Eye 14.1mm
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ram 1500 | V | - | Rear | 8 Cyl 5.7L | SLT | 4WD | 345 |
- B8 5100-Shock Absorber
- w/0 - 1 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5100 Shock Absorber
- Product Attributes:
- Boot Included: Black Bellows
- Collapsed Length:
- 16.750 In.
- 425.5mm
- Internal Design: Monotube
- Lower Mount Type: Eye 14.1mm
- Upper Mount Type: Eye 14.1mm
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Extended Length:
- 26.730 In.
- 679mm
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ram 1500 | V | - | Rear | 8 Cyl 4.7L | Tradesman | 4WD | 287 |
- B8 5100-Shock Absorber
- w/0 - 1 in. Lift; w/o Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100 Shock Absorber
- Product Attributes:
- Boot Included: Black Bellows
- Collapsed Length:
- 16.440 In.
- 417.5mm
- Internal Design: Monotube
- Lower Mount Type: Eye 14.2mm
- Upper Mount Type: Eye 14.2mm
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Extended Length:
- 26.040 In.
- 661.5mm
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
-
Features:
- Bilstein B8 5100 Shock Absorbers
- Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ram 1500 | V | - | Rear | 8 Cyl 5.7L | Big Horn | RWD | 345 |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 0-1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 16.440 In.
- 417.5mm
- Upper Mount Type: Eye 14.2mm
- Extended Length (MM): 661.5
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 417.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 26.040 In.
- 661.5mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein B8 5100 Shock Absorbers
- Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Drive Type |
|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Big Horn | RWD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1.75-2.5" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 699.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 424.8
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-288278
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Express | Standard Cab Pickup | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.7
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 420.5
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-242393
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Express | Standard Cab Pickup | 4WD |
- B6 4600-Shock Absorber
- Without Air Suspension
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Reservoir: No
- WARNING CA Proposition 65: Yes
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Blue Straight
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24187350, 52853456AB, 52853457AD, 52855791AD, 926543, 973795, 985-24-032, BE5-F811, F4-BE5-F811-H0, MX6162, RS5367, RS7367, RS999367, ZX2028
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Drive Type |
|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Big Horn | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1-2.5" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 699.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 424.8
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Drive Type |
|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Big Horn | 4WD |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 0-1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 16.750 In.
- 425.5mm
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.0
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 425.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 26.730 In.
- 679mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24187374, 385548, BE5-F813, F4-BE5-F813-H0
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Drive Type |
|---|---|---|---|---|
| 2013 - Ram 1500 | Coil | Rear | Big Horn | 4WD |
Showing 1 - 10 of 86 products
Loading...