Image
Product
Price
- Steering Knuckles; Box One Of Three
- Lift Kit-Suspension Component; Steering Knuckles; Box One Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2013 - Toyota Tundra | SR5 | 4WD |
- Subframes; Rear Shocks; Box Two Of Three
- Lift Kit-Suspension Component; Subframes; Rear Shocks; Box Two Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2013 - Toyota Tundra | Limited | 4WD |
- 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks
- Suspension Lift Kit w/Shocks; 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 3.5-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | Platinum | RWD | 345 |
- 6 in. Lift; Includes Steering Knuckles/Subframes/Rear Maxtrac Shocks/Rear Blocks And U-Bolts/Brackets And Hardware
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Steering Knuckles/Subframes/Rear Maxtrac Shocks/Rear Blocks And U-Bolts/Brackets And Hardware;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Lift Kit w/Shocks
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Made In The USA
- Suspension Lift Kit w/Shocks, 6 in. Lift, Steering Knuckles, Subframes, Rear MaxTrac Shocks, Reaqr Blocks And U-Bolts, Brackets And Hardware
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Toyota Tundra | V | 4608 | 8 Cyl 4.6L | Base | 4WD | - |
- Miscellaneous Brackets And Hardware; Box Three Of Three
- Lift Kit-Suspension Component; Miscellaneous Brackets And Hardware; Box Three Of Three;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Suspension Component Box
- Suspension Component Box
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2013 - Toyota Tundra | SR5 | 4WD |
- 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks
- Suspension Lift Kit w/Shocks; 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 6-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | SR5 | RWD | 345 |
- 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks
- Lift Kit-Suspension Component; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 2 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2013 - Toyota Tundra | Platinum | RWD |
- 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks
- Lift Kit-Suspension Component; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks;
- Lift Kit-Suspension Component
- Product Attributes:
- Lift/Drop Height: 4 In.
-
Features:
- Provide Additional Clearance For Your Vehicle
- Allowing A Larger Tire Size
- Suspension Lift Kit w/Shocks; 4 in. Rear Lift; Includes Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2013 - Toyota Tundra | Base | RWD |
- 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks
- Suspension Lift Kit w/Shocks; 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 33 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 3.5-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | Platinum | RWD | 345 |
- 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks
- Suspension Lift Kit w/Shocks; 6 in. Front 4 in. Rear Lift; Includes Spindles w/Brake Lines; Strut Spacers; Blocks w/U-Bolts; 2 Rear MaxTrac Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
-
Features:
- Comes With DOT Approved Extended Brake Lines
- Will Clear 35 in. Tire
- 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
- Track Width Increases 1 in. Per Side
- Prior To Installation Measuring Is Required
- Trimming May Be Required For Optimal Fender Well Clearance
- The Maxtrac Suspension 6-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2013 - Toyota Tundra | V | 5663 | 8 Cyl 5.7L | SR5 | RWD | 345 |
Showing 1 - 10 of 159 products
Loading...