Image
Product
Price
- MONOTUBE SHOCK; M9527
- 24.75 in. Extended; 14.54 in. Collapsed; w/0 in. Lift/Drop
- MONOTUBE SHOCK; M9527
- M95 Performance Monotube Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: N/a
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Ultimate Shock For Light Trucks/Jeeps/SUVs
- Single Tube Design
- High Pressure Nitrogen Gas/Floating Piston Tech.
- Fastest Responding Shock Ever
- Internal Bump Stop
- 180 Deg. Directional Mounting
- Large 46mm Bore
- No Fade Or Lag For Consistent Performance
- Skyjacker M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps, and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2014 - GMC Sierra 2500 HD | V | 6599 | Rear | 8 Cyl 6.6L | 4WD | 403 |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 4-6" Front Lift Stock mounting points only Not compatible with lower control arm torsion bar relocation bracket
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 615.2
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 394.5
- Boot Included: No
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-218190, 980-24-960
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Front | Denali |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.4mm
- Extended Length (MM): 680.5
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 417.0
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24196468, 450443, 980-24-664, RS77379
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Rear | Denali |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 4-6" Front Lift Stock mounting points only Not compatible with lower control arm torsion bar relocation bracket
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 615.5
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 406.0
- Boot Included: Black Bellows
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24218023, 980-24-658
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Front | Denali |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 1.5" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Crossbar
- Extended Length (MM): 468.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 357.0
- Boot Included: Black Bellows
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-196451, RS77378
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Front | Denali |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 3-4" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.4mm
- Extended Length (MM): 794.5
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 460.8
- Boot Included: No
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-187694, 25-218206, 980-24-956, BR5-G919, F4-BR5-G919-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Rear | Denali |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 0-2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.4mm
- Extended Length (MM): 686.7
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 420.0
- Boot Included: No
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-187625, 25-196481, BR5-G714, F4-BR5-G714-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - GMC Sierra 2500 HD | Rear | Denali |
- PERFORMANCE SERIES 2.0 SMOOTH BODY RESERVOIR SHOCK
- Lift: 1.5-3.5 Includes Billet Reservoir Clamp I Does not fit magnetic suspension
- Application specific valving to maximize performance.
- FOX PERFORMANCE 2.0 SMOOTH BODY RESERVOIR SHOCK
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Compressed Length (in): 13.28
- Fox Catalog: Truck
- Bottom Mount: C1
- Travel (in): 7.12
- Body Material: Aluminum
- Top Mount (p/n): 213-01-251
- Top Mount: Bp5
- Label Name: 11-on Chevy Hd Front, Ps, 2.0, R/r, 7.1", 1.5-3.5" Lift
- Reservoir Type: Remote
- Body Diameter (in): 2
- Bottom Mount (p/n): 213-01-564
-
Features:
- Includes Aluminum Reservoir Clamp
- Performance Tuned For Vehicle Specific Application
- Aluminum Body Dissipates Heat Faster Than Steel
- External Reservoir System Dissipates Heat Fast
- Black Anodized CNC Machined Aluminum Components
- FOX Performance Series shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-253161
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - GMC Sierra 2500 HD | Front |
- PERFORMANCE SERIES 2.0 SMOOTH BODY IFP SHOCK
- Lift: 0-1
- Application specific valving to maximize performance.
- FOX PERFORMANCE 2.0 SMOOTH BODY IFP SHOCK
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Compressed Length (in): 16.30
- Fox Catalog: Truck
- Bottom Mount: Es6
- Travel (in): 9.62
- Body Material: Aluminum
- Top Mount (p/n): 213-28-000-b
- Top Mount: Es6
- Label Name: 99-on Chevy Hd Rear, Ps, 2.0, Ifp, 9.6", 0-1" Lift
- Reservoir Type: Internal Floating Piston (ifp)
- Body Diameter (in): 2
- Bottom Mount (p/n): 213-28-000-b
-
Features:
- Performance Tuned For Vehicle Specific Application
- Aluminum Body Dissipates Heat Faster Than Steel
- IFP Separates Oil From High-Pressure Nitrogen Gas
- Black Anodized CNC Machined Aluminum Components
- FOX Performance Series shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-185783, 24-186742
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - GMC Sierra 2500 HD | Rear |
- PERFORMANCE SERIES 2.0 SMOOTH BODY RESERVOIR SHOCK
- Lift: 7-9 Includes Billet Reservoir Clamp I Does not fit magnetic suspension Not For Use With Lift Kits That Change OE Mounts | Includes Billet Reservoir Clamp
- Application specific valving to maximize performance.
- FOX PERFORMANCE 2.0 SMOOTH BODY RESERVOIR SHOCK
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Compressed Length (in): 16.28
- Fox Catalog: Truck
- Bottom Mount: C1
- Travel (in): 9.62
- Body Material: Aluminum
- Top Mount (p/n): 213-01-251
- Top Mount: Bp5
- Label Name: 11-on Chevy Hd Front, Ps, 2.0, R/r, 9.6", 7-9" Lift
- Reservoir Type: Remote
- Body Diameter (in): 2
- Bottom Mount (p/n): 213-01-249
-
Features:
- Includes Aluminum Reservoir Clamp
- Performance Tuned For Vehicle Specific Application
- Aluminum Body Dissipates Heat Faster Than Steel
- External Reservoir System Dissipates Heat Fast
- Black Anodized CNC Machined Aluminum Components
- FOX Performance Series shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - GMC Sierra 2500 HD | Front |
Showing 1 - 10 of 85 products
Loading...