2015 Dodge Charger Suspension Control Arm and Ball Joint Assembly Parts
Choose your Engine for your 2015 Dodge Charger
Image
Product
Price
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: 1 Control Arm; 1 Ball Joint; 1 Nut
- Mounting Hole Diameter: 12.2 Mm
- Mounting Hole Quantity: 2
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 232
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Ball Joint Thread Diameter: 12
- Control Arm Color: Black
- Control Arm Maximum Width: 298
- Bushing Material:
- Steel
- Rubber
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
2606764, 4895669AA, CA1457B, CB25146, CMS251008, GS251008, JTC2138, RK621537, TC5666
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - Dodge Charger | Front Left Upper | AWD |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included: Yes
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: 1 Control Arm; 1 Ball Joint; 1 Nut
- Mounting Hole Diameter: 12.2 Mm
- Mounting Hole Quantity: 2
- Bushings Included: Yes
- Control Arm Material: Steel
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 232
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Ball Joint Thread Diameter: 12
- Control Arm Color: Black
- Control Arm Maximum Width: 298
- Bushing Material:
- Steel
- Rubber
- Ball Joint Installed: Yes
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
2606765, 4895668AA, CA1458B, CB25147, CMS251009, GS251009, JTC2139, RK621538, TC5686
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - Dodge Charger | Front Right Upper | AWD |
- Control Arm and Ball Joint Assembly
- Non-Adjustable Type Replace in Pairs Premium OE Replacement
- MOOG RK620177 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 11.730
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
109620177, 2605521, 2605521M, 2643105, 45D3599, 45K2005, 4782665AB, 507-1312, 521-007, 6182005, 622.63026, 68045131AE, AA3105, CB81087, CB81127, CB81237, CMS25117, FA4417...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - Dodge Charger | Front Left Upper | RWD |
- Control Arm and Ball Joint Assembly
- Kit Contains BUSHING Premium OE Replacement
- MOOG RK620257 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 18.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
2605880, 2605880M, 41073, 45D3474, 46D3474A, 4782612AA, 4782612AB, 4782612AC, 4782612AD, 507-1410, 5071410B, 5180606AA, 5180606AB, 521-122, 521-932, 5290828AA, 5290828AB, 5290828AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Dodge Charger | V | 6424 | Front Right Lower Forward | 8 Cyl 6.4L | 392 |
- Control Arm and Ball Joint Assembly
- Kit Contains BUSHING Premium OE Replacement
- MOOG RK620258 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 18.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
2605881, 2605881M, 41072, 45D3475, 46D3475A, 4782613AA, 4782613AB, 4782613AC, 4782613AD, 507-1411, 5071411B, 5180607AA, 5180607AB, 521-121, 521-931, 5290829AA, 5290829AB, 5290829AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Dodge Charger | V | 6166 | Front Left Lower Forward | 8 Cyl 6.2L | 376 |
- Control Arm and Ball Joint Assembly
- Non-Adjustable Type Replace in Pairs Premium OE Replacement
- MOOG RK620178 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 12.360
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
109620178, 2605522, 2643102, 45D3600, 45K25002, 4782666AB, 4782666AF, 507-1313, 521-008, 521-330, 6182002, 6182004, 622.63027, 68045130AE, AA3102, CB81088, CB81128, CB81238...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - Dodge Charger | Front Right Upper | RWD |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TQ metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TQ steel composition results in a stronger component
- Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
102152, 2605881, 42180001, 507-1411, 521-121, CB81083, CK620258, CMS25120, CP1377, GS25120, K620258, MS25120, RK620258, TK620258
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2015 - Dodge Charger | V | 6166 | Front Left Lower Forward | 8 Cyl 6.2L | RWD | 376 |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
102152, 2605881, 42180001, 507-1411, 521-121, CB81083, CK620258, CMS25120, CP1377, GS25120, K620258, MS25120, RK620258, TK620258
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2015 - Dodge Charger | V | 6166 | Front Left Lower Forward | 8 Cyl 6.2L | RWD | 376 |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
2607226, 522-802, CB81474, CK622224, CMS251124, K622224, MS251124, RK622224, TK622224
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2015 - Dodge Charger | V | - | Front Right Lower Forward | 8 Cyl 5.7L | RWD | 345 |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
This Part Fits the Following OEM/Substitute Numbers:
1900152, 2606765, 521-704, CB81128, CK621538, CMS251009, GS251009, K621538, MS251009, RK621538, TCB70035
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2015 - Dodge Charger | Front Right Upper | AWD |
Showing 1 - 10 of 18 products
Loading...