2017 Jeep Wrangler Suspension Shock Absorber Parts
Choose your Submodel for your 2017 Jeep Wrangler
Image
Product
Price
- SHOCKS
- REAR SHOCK - 2-3" LIFT HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, 1.5" WIDE SLEEVE FOR UP TO A 9/16"/14M,M BOLT 26.5" EXTENDED, 16.0" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 2650SL-2 IS A SINGLE STEM-TO-LOOP REAR SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Jeep Wrangler |
- 28 Extended; 15.3 Collapsed; Each; w/2 - 3.5 in. Lift
- Rubicon Mono-Tube Shock Absorber; 28 Extended; 15.3 Collapsed; Each;
- Rubicon Mono-Tube Shock Absorber
- Product Attributes:
- Collapsed Length: 15.300 In.
- Shock Stroke: 12.700 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 28.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Calibrated And Tested For Each Vehicle
- Provides Excellent Heat Dissipation
- 46mm Digressive Piston For Responsive Control
- 14mm Nitro Steel Piston Rods
- No Chip Or Peel Like Chrome Rods
- Robotic Welds For Greater Consistency/Strength
- Limited Lifetime Warranty
- Manufactured In The USA
- Rubicon'S Extreme-Duty Mono-Tube Shocks Are Developed And Tuned Specifically For Each Application. This Is The Only Way To Deliver Maximum Control While Not Compromising Ride Quality, High-Speed Stability And Comfort For Those Extended Trips Over The Toughest Terrain.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Rear | Unlimited Sport |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Boot Included: Blue Bellows
- Internal Design: Monotube
- Lower Mount Type: Eye 12.1mm
- Upper Mount Type: Bar Pin
- Reservoir: No
- Segment: Light Truck
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- Specific tuning for stock height vehicles
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217821, 24141734, 323500, 6800 3306AB, 6800 3307AB, 6800 3308AB, 6800 3308AC, 6800 3309AB, 6800 3313AB, 68003306AB, 68003307AB, 68003308AB, 68003308AC, 68003309AB, 68003313AB, 6802 7795AA, 6802 7795AB, 6802 7796AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Rear | Rubicon |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 12.1mm
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Adjustable Damping: Non-adjustable
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- Specific tuning for stock height vehicles
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217817, 24141727, 323500, 6800 3290AC, 6800 3291AC, 6800 3293AC, 6800 3303AC, 6800 3303AE, 6800 3303AG, 6800 3304AC, 6800 3305AC, 68003290AC, 68003291AC, 68003293AC, 68003303AC, 68003303AE, 68003303AG, 68003304AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Front | Rubicon |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Front Lift With Short Arm Lift Kit
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 700.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 416.8
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217815, 24186995, BE5-E578, F4-BE5-E578-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Front | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Front Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 686.6
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 437.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160022
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Front Right | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Rear Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 707.0
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 436.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160030
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Rear Right | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Rear Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 707.0
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 436.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160030
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Rear Left | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Front Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 686.6
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 437.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160022
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Front Left | Rubicon |
- MONOTUBE SHOCK; M9535
- 22.75 in. Extended; 13.54 in. Collapsed; w/1 - 3.5 in. Lift
- MONOTUBE SHOCK; M9535
- M95 Performance Monotube Shock Absorber
- Product Attributes:
- Collapsed Length: 13.540 In.
- Shock Stroke: N/a
- WARNING CA Proposition 65: Yes
- Extended Length: 22.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Ultimate Shock For Light Trucks/Jeeps/SUVs
- Single Tube Design
- High Pressure Nitrogen Gas/Floating Piston Tech.
- Fastest Responding Shock Ever
- Internal Bump Stop
- 180 Deg. Directional Mounting
- Large 46mm Bore
- No Fade Or Lag For Consistent Performance
- Skyjacker M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps, and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Jeep Wrangler | Front |
Showing 1 - 10 of 105 products
Loading...