Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1.75-2.5" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 699.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 424.8
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-288278
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Standard Cab Pickup | 4WD |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 16.750 In.
- 425.5mm
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.0
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 425.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 26.730 In.
- 679mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24187374, 385548, BE5-F813, F4-BE5-F813-H0
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Standard Cab Pickup | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.7
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 420.5
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-242393
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Standard Cab Pickup | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 1-2.5" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 699.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 424.8
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Crew Cab Pickup | 4WD |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 0-1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 16.750 In.
- 425.5mm
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.0
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 425.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 26.730 In.
- 679mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Crew Cab Pickup | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 0-1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 679.7
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 420.5
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | Crew Cab Pickup | 4WD |
- B8 5100-Shock Absorber
- For Front Lifted Height: 1.75" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 251mm
- 9.880 In.
- Upper Mount Type: Stem
- Extended Length (MM): 371.5
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 251.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye Crossbar
- Adjustable Damping: Non-adjustable
- Extended Length:
- 14.630 In.
- 371.5mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein B8 5100 Shock Absorbers
- Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model | Drive Type |
|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Front | Coil | Big Horn | RWD |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Front Lift Height: 0-2.8" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 545.2
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- Collapsed Length (MM): 384.0
- Boot Included: No
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-187367, BE5-F812, F4-BE5-F812-H0
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model | Drive Type |
|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Front | Coil | Big Horn | 4WD |
- B6 4600 - Suspension Shock Absorber
- Without Air Suspension
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Lower Mount Type: Clevis
- Upper Mount Type: Stem
- Reservoir: No
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body (non-coilover)
- Body Diameter (ID): 46mm
- Spring Seat Included: Yes
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-187343, 68040880AD, 68040880AE, 68040880AG, 68040880AH, 68040882AB, 68040882AC, 68040882AD, 68040882AE, BE5-F810, F4-BE5-F810-H0, RS5808, RS7808, RS999808, ZX2014
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model | Drive Type |
|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Front | Coil | Big Horn | 4WD |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 0-1" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 16.440 In.
- 417.5mm
- Upper Mount Type: Eye 14.2mm
- Extended Length (MM): 661.5
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 417.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 26.040 In.
- 661.5mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein B8 5100 Shock Absorbers
- Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Durability And Performance
- Vehicle Specific Ride Tuning
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model | Drive Type |
|---|---|---|---|---|
| 2019 - Ram 1500 Classic | Coil | Rear | Big Horn | RWD |
Showing 1 - 10 of 52 products
Loading...