Image
Product
Price
- Front And Only Fits Models w/6 Cylinders~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94065)~Use 35/12.50R20 Tires w/20X9 Wheels w/5 in. BS; Minor Trim~35/12.50R18 Tires w/18x9 Wheels w/4.5 in. BS w/Minor Trimming~325/65R18 Tires w/18x9 Wheels w/4.5 in. BS w/Minor Trimming~325/60R20 Tires w/20x9 Wheels w/5 in. BS w/Minor Trimming~37/12.50R17 Tires w/17x9 Wheels w/4.5 in. BS w/Cutting~37/12.50R18 Tires w/18x9 Wheels w/4.5 in. BS w/Cutting~37/12.50R20 Tires w/20x9 Wheels w/5 in. BS w/Cutting
- Coil Spring Kit; Front And Rear;
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Guarantee Superior Performance And Functionality
- Corner specific Dual Rate coils springs provide a level stance side to side and offer factory load carrying capacity with a smooth ride. As a true dual rate coil, the first stage of the coil allows the spring to respond to small bumps for a very complaint ride at lower speeds. As the spring travels further, the rate increases to absorb larger impacts and support cargo in the Jeep Gladiator. These American made springs are the best on the market for all around driving while providing increased suspension travel for offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Launch Edition | 220 |
- 5 in. Only Fits Models w/6 Cylinders~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94068)~Use 40/12.50R17 Tires w/17X9 Wheels w/4.5 in BS w/Cutting~Use 40/12.50R18 Tires w/18X9 Wheels w/4.5 in BS w/Cutting~Use 40/12.50R20 Tires w/20X9 Wheels w/5 in BS w/Cutting~37/12.50R17 Tires w/17x9 Wheels w/4.5 in. BS w/Minor Trimming~37/12.50R18 Tires w/18x9 Wheels w/4.5 in. BS w/Minor Trimming~37/12.50R20 Tires w/20x9 Wheels w/5 in. BS w/Minor Trimming
- Coil Spring Kit; 5 in.;
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Corner specific Dual Rate coils springs provide a level stance side to side and offer factory load carrying capacity with a smooth ride. As a true dual rate coil, the first stage of the coil allows the spring to respond to small bumps for a very complaint ride at lower speeds. As the spring travels further, the rate increases to absorb larger impacts and support cargo in the Jeep Gladiator. These American made springs are the best on the market for all around driving while providing increased suspension travel for offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Launch Edition | 220 |
- For 3 in. Lift; For PN [K4171DL/K4172DL]
- Coil Spring Kit; Rear; For 3 in. Lift; For PN [K4171DL/K4172DL];
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Guarantee Superior Performance And Functionality
- Coil spring kit.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
- For 5 in. Lift; For PN [K4179DL/K4180DL]
- Coil Spring Kit; Rear; For 5 in. Lift; For PN [K4179DL/K4180DL];
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Guarantee Superior Performance And Functionality
- Corner specific Dual Rate coils springs provide a level stance side to side and offer factory load carrying capacity with a smooth ride. As a true dual rate coil, the first stage of the coil allows the spring to respond to small bumps for a very complaint ride at lower speeds. As the spring travels further, the rate increases to absorb larger impacts and support cargo in the Jeep Gladiator. These American made springs are the best on the market for all around driving while providing increased suspension travel for offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Front Raise Height 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Jeep Gladiator | Front | Altitude |
- Raises Front 2 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Jeep Gladiator | Front | Altitude |
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Front Raise Height 2.5 (in)
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Gladiator | Front |
Showing 1 - 7 of 7 products
Loading...