Image
Product
Price
- LIFT
- 4.5"/2" LIFT HEIGHT REQUIRES BOX 1 (PART# 949942-1) & LONGER SHOCKS TO MAKE A COMPLETE 4.5" LIFT KIT SEE PART# 949942S OR 949942F FOR LONGER SHOCKS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 4.5"/2" LIFT HEIGHT (BOX 2)
- MAXTRAC SUSPENSION'S PART# 949942-2 IS A 2" LIFT REAR BOX KIT INCLUDING COILS, BUMP STOP EXTENSIONS, BRAKE LINE BRACKETS, SWAY BAR END LINKS & HARDWARE
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- Lift
- 4.5"/2" LIFT HEIGHT F&R FOX 2.0 PERFORMANCE SERIES SHOCKS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 949942F IS A SET OF 4 FOX 2.0 PERFORMANCE SERIES F&R SHOCKS (W/ 4"/2" LIFT)
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- LIFT
- 4.5"/2" LIFT HEIGHT REQUIRES BOX 2 (PART# 949942-2) & LONGER SHOCKS TO MAKE A COMPLETE 4.5" LIFT KIT SEE PART# 949942S OR 949942F FOR LONGER SHOCKS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 4.5"/2" LIFT HEIGHT (BOX 1)
- MAXTRAC SUSPENSION'S PART# 949942-1 IS A 4.5" LIFT FRONT BOX KIT INCLUDING FRONT COILS, BUMP STOP EXTENSIONS, TRAC BAR & HARDWARE
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- Lift
- 4.5"/2" LIFT HEIGHT F&R MAXTRAC SHOCKS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 949942S IS A SET OF 4 MAXTRAC TWIN TUBE GAS CHARGED F&R SHOCKS (W/ 4"/2" LIFT)
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- LIFT KITS
- 4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4.5" BACKSPACING OR LESS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED THIS KIT IS FOR V6 GAS MODELS ONLY WE OFFER GEOMETRY CORRECTION BRACKETS TO COMPLIMENT THIS KIT (PART # 9499CCB) MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 4.5" LIFT KIT W/ FOX 2.0 SHOCKS
- MAXTRAC SUSPENSION'S KIT# K949942F IS A COMPLETE 4.5" LIFT KIT INCLUDING F&R COILS, F&R BUMP STOP EXTENSIONS, FRONT TRAC BAR, REAR SWAY BAR END LINKS & FRONT/REAR FOX 2.0 PERFORMANCE SERIES SHOCKS
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- LIFT KITS
- 4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4.5" BACKSPACING OR LESS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED THIS KIT IS FOR V6 GAS MODELS ONLY WE OFFER GEOMETRY CORRECTION BRACKETS TO COMPLIMENT THIS KIT (PART # 9499CCB) MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 4.5" LIFT KIT W/ MT SHOCKS
- MAXTRAC SUSPENSION'S KIT# K949942S IS A COMPLETE 4.5" LIFT KIT INCLUDING F&R COILS, F&R BUMP STOP EXTENSIONS, FRONT TRAC BAR, REAR SWAY BAR END LINKS & FRONT/REAR MAXTRAC SHOCKS
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2020 - Jeep Gladiator | 4WD |
- 2 in. Lift; For PN [K4185] Fits Mojave Models Only~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94068)
- Trail Lift System; 2 in. Lift; For PN [K4185];
- Trail Lift System
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Guarantee Superior Performance And Functionality
- This Gladiator Mojave lift kit provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. The Mojave lift kit has been tuned with proper dual rate coil springs to work in conjunction with the Fox 2.5 Internal bypass shocks for a superior ride quality. The system is a complete short arm suspension that utilizes the factory lower control arm mounts for an easy installation. The Fabtech lower link arms are constructed of thick wall steel tubing that are guaranteed never to bend. They come with large polyurethane bushings on one end with internal threads on the other to accept the groundbreaking Fabtech 5 Ton Joint(R) for longevity and a quiet ride. Fabtech's dual rate coil springs are corner specific to the Gladiator. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. The heart of the factory Jeep Mojave suspension is the Fox 2.5 Internal Bypass shocks. This Fabtech lift kit retains those shocks with heavy duty extension brackets that are designed for rugged offroad use. The Fox hydraulic bump stops are also retained and the bump stop pads are relocated to work in conjunction with the new ride height for proper suspension travel operation. To address the steering geometry with the increased ride height, a Draglink Flip kit along with a heavy duty Track Bar bracket is included. This relocates the Gladiator Mojave steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Mojave | 220 |
- 3 in. Lift
- Sport Lift System; 3 in. Lift;
- Sport Lift System
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Everything You Will Need To Lift Your Vehicle
- Increased Leaf Spring Flexibility
- No Welding Or Cutting
- Ride Quality Enhancement
- Increased Travel And Articulation
- Easy Installation
- This Sport lift kit is Fabtech's most popular Jeep system providing increased ride height and suspension performance at a great price. Installation is easy and can be installed in a couple hours. The Sport lift kit features American made front coil springs that are a dual rate design allowing extended suspension travel for offroad use while providing a smooth highway ride. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. The rear of the vehicle receives coil spring spacers retaining the factory ride and load carrying capacity. The spacer height is 1-3/4 in. to help level the stance of the vehicle. Four bump stops extensions utilize the factory bump stops for compliant cushioning at full compression. The extensions retain the stock down travel to eliminate over cycling of the suspension and driveline.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Jeep Gladiator | Launch Edition |
- 5 in. Lift Only Fits Models w/6 Cylinders~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94068)~Use 40/12.50R17 Tires w/17X9 Wheels w/4.5 in BS w/Cutting~Use 40/12.50R18 Tires w/18X9 Wheels w/4.5 in BS w/Cutting~Use 40/12.50R20 Tires w/20X9 Wheels w/5 in BS w/Cutting~37/12.50R17 Tires w/17x9 Wheels w/4.5 in. BS w/Minor Trimming~37/12.50R18 Tires w/18x9 Wheels w/4.5 in. BS w/Minor Trimming~37/12.50R20 Tires w/20x9 Wheels w/5 in. BS w/Minor Trimming
- Trail Lift System; 5 in. Lift;
- Trail Lift System
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Guarantee Superior Performance And Functionality
- This Trail Lift Kit provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. This Gladiator lift kit has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory lower control arm mounts for an easy installation. The Fabtech lower link arms are constructed of thick wall steel tubing that are guaranteed never to bend. They come with large polyurethane bushings on one end with internal threads on the other to accept the groundbreaking Fabtech 5 Ton Joint(R) for longevity and a quiet ride. Fabtech's dual rate Gladiator coil springs are corner specific to the Jeep JT. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip kit along with a heavy duty Track Bar bracket is included. This relocates the Gladiator steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The rear Gladiator suspension receives a heavy duty Track Bar bracket to center the axle under the vehicle with the new ride height and help retain the factory roll center of the vehicle. Front and rear bumps stop extensions protect the Jeep Gladiator suspension from over cycling. This popular Jeep Gladiator lift kit is a top choice for daily drivers that enjoy tackling tough trails and overlanding with the comfort that they have a high quality complete suspension under their Gladiator.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Launch Edition | 220 |
- 2 in. Lift; For PN [K4184] Fits Mojave Models Only
- Sport II Lift System; 2 in. Lift; For PN [K4184];
- Sport II Lift System
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Everything You Will Need To Lift Your Vehicle
- Increased Leaf Spring Flexibility
- No Welding Or Cutting
- Ride Quality Enhancement
- Increased Travel And Articulation
- Easy Installation
- The Sport II Lift kit is Fabtech's most popular Gladiator lift kit that provides an increased ride height for the Mojave edition at a great price. Installation is easy and can be installed in a couple hours.The Sport II features American made front and rear coil springs that are a dual rate design allowing extended suspension travel for offroad use while providing a smooth highway ride. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the Gladiator and address large impact absorption at higher speeds.The heart of the factory Jeep Mojave suspension is the Fox 2.5 Internal Bypass shocks. This Fabtech lift kit retains those shocks with heavy duty extension brackets that are designed for rugged offroad use. The Fox hydraulic bump stops are also retained and the bump stop pads are relocated to work in conjunction with the new ride height for proper suspension travel operation. Fabtech includes extended length front and rear sway bar links with urethane bushings to reposition the bars to work within the factory operating planes. By extending the length of the links, it prevents the sway bar from going over center and creating bind at full extension travel. This Gladiator Mojave lift kit is a great choice for the Jeep enthusiast that wants to retain the factory Fox Shocks with a slight height increase to run 37 in. tall tires.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Mojave | 220 |
Showing 1 - 10 of 85 products
Loading...