Image
Product
Price
- Air Leveling Kit;
- Air Leveling Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Air Leveling Kit
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Front |
- LoadLifter 5000 Kit
- Offering up to 5;000 pounds of load-leveling capacity; the LoadLifter 5000 kit from Air Lift will make hauling a breeze. With the added stability and weight-distribution that air springs provide.
- LoadLifter 5000 Leveling Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Fully Adjustable
- Level Vehicles When Towing/Hauling
- Eliminate Sag And Bottoming Out
- Rugged Durable Components Includes Air Springs/Hardware
- Easy To Install With Included Instructions
- Up to 5000 lbs. of Leveling Capacity
- Uses 2-Ply Fabric Reinforced Air Springs
- Limited Lifetime Warranty
- Safe Comfortable Ride
- Offering up to 5,000 pounds of load-leveling capacity, the LoadLifter 5000 kit from Air Lift will make hauling a comfortable and stress-free experience. For frequent use, our fully-adjustable, industry leading air springs are the perfect partner for your vehicle, eliminating any ride issues that you might face. The LoadLifter 5000 kit helps to eliminate problems frequently faced when towing and hauling, such as squat, poor headlight aim, trailer sway, body roll, and bottoming out. With the added stability and weight-distribution that air springs provide, you can haul safely, knowing that you have optimal braking and steering control. With the ability to adjust the air pressure from 5-100 PSI, your Ram ProMaster van can be ready for any weight and any situation (Note: Do not exceed vehicle's GVWR). An Air Lift exclusive, each kit comes equipped with upper and lower roll plates, added to protect the air springs from sharp edges, while increasing the load capacity by 10%. The air springs themselves are built like a tire, reinforced with 2-ply fabric for maximum strength. All of the end caps are made with an ultra high-strength nylon composite formula, strong as steel, but much lighter and corrosion proof. Installing the kit is a simple process, requiring only common hand tools and no frame drilling. The LoadLifter 5000 kit comes with clear, easy to follow instructions, and an under frame design, made to work with most in-bed hitches. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. To ensure the highest quality, longevity, and customer satisfaction, the key suspension components, including the air springs and all hardware, have all been torture-tested to 1 million cycles on our hydraulic test rig, the equivalent of 100,000 miles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Rear |
- 2 in.
- Leveling Kit; 2 in. Front;
- Leveling Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Leveling Kit
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ford Ranger | Front | 4WD |
- 3 in.
- Leveling Kit; 3 in. Front;
- Leveling Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Leveling Kit
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2021 - Ford Ranger | Front | 4WD |
- 2" Leveling Kit
- Strut disassembly required to install preload spacers.Will not work with Tremor models.
- Most leveling kits use a tall, top-mounted strut spacer that provides lift but overextends the suspension or driveline angles at ?full droop?, maxing out ball joints and leading to premature wear/failure of the components. To get around this issue, this kit uses a 2-piece spacer design comprised of a smaller, top-mounted steel strut spacer in combination with a preload spacer. The result is a leveling kit done right that maintains the factory ride quality and functionality with room for larger 285/70r17 tires.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacer - Front
- Product Attributes:
- Max Tire Size 2: 285/65r18
- Lift Type: Leveling Kit
- Welding Required: No
- Front Lift Method: Strut Spacers & Preload
- Wheel Size 2: 18 X 8 (stock)
- Accommodates Factory Wheels: Yes
- Wheel Size: 17x8 (stock)
- Back Spacing 2: 6.67
- Back Spacing: 6.67
- Front Lift Height: 2"
-
Features:
- piece deisgn to lift and level stance
- Maintains OE ride question and handling
- Keeps ball joint/CV operating angles within spec
- Allows fitment of 285/70r17 tires
- Includes Factory Protection Plus
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2021 - Ford Ranger | 4WD |
- 2.5" Strut Spacer, Black
- 2.5" Strut Spacer, Black
- Body Armor 4X4 Suspension Leveling Kit
- Product Attributes:
- Winch Y/N: N/a
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: 2.5 In.
- Warning: None
- Drive: 2wd/4wd
- D-Ring Mounts: N/a
- Category: Level Kit
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - 506013-fd - Suspension Leveling Kit
- USMCA Code: 87088
- Prop 65 (C, R or CR): Cr
-
Features:
- Fits Up To 32" Tires
- Bolt On Installation
- Stock Ride Quality
- Quickly Return To Stock
- Fabricated From 1/4" Steel and Uses Grade 10 Hardware
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Front |
- 2.5" Strut Spacer, Black
- 2.5" Strut Spacer, Black
- Body Armor 4X4 Suspension Leveling Kit
- Product Attributes:
- Winch Y/N: N/a
- Light Fitment: N/a
- Fed-Ex: Y
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 - Long Label: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
- Height: 2.5 In.
- Warning: None
- Drive: 2wd/4wd
- D-Ring Mounts: N/a
- Category: Level Kit
- Prop 65 - Warning: Warning - Both Cancer And Reproduction.tif
- Title: Body Armor 4x4 - 506013-fd - Suspension Leveling Kit
- USMCA Code: 87088
- Prop 65 (C, R or CR): Cr
-
Features:
- Fits Up To 32" Tires
- Bolt On Installation
- Stock Ride Quality
- Quickly Return To Stock
- Fabricated From 1/4" Steel and Uses Grade 10 Hardware
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Ford Ranger | Front |
Showing 1 - 7 of 7 products
Loading...