Image
Product
Price
- PRO-TRUCK LIFT SYSTEM (Stage 1)
- Front: +3.0 in Rear: +0-1.5 in
- Product Attributes:
- (WSM) Web Category Description: Pro-truck Lift System
- (WSM) Clean Prod Desc: Pro-truck-lift-system
- (WSM) Category Display Order: 499
-
Features:
- Matched system of lift springs and shocks designed for increased travel and performance
- Provides balanced ride quality, control and off-road capability
- Manufactured by Eibach using off-road race spring technology and OE quality standards
- Shocks individually tested for matched performance in each corner
- Made In U.S.A.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2021 - Ford Ranger | 4WD |
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 19-21 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCalifornia AL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp System, Tubular Uca Al Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XL |
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Steel Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 20-23 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCalifornia STEEL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp Sys, Tubular Uca Steel Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XL |
- without Tremor Package Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Steel Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 20-23 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCalifornia STEEL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp Sys, Tubular Uca Steel Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | Lariat |
- with Tremor Package Raises Front 0 (in) - 2.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Steel Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 20-23 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCalifornia STEEL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp Sys, Tubular Uca Steel Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XLT |
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 19-21 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCalifornia AL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp System, Billet Uca Al Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- CNC machined 6061 billet aluminum upper control arms allow for on-vehicle camber and caster adjustment
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XL |
- with Tremor Package Raises Front 0 (in) - 2.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 19-21 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCalifornia AL KNUCKLE
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Recommended Aftermarket Wheels: Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Maximum Lift Front: 3.5
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Title: Icon 19-21 Ford Ranger, 0-3.5" Lift, Stage 2 Susp System, Billet Uca Al Knuckle
- Coils Quantity Front: 2
- Spring Material: Steel
- Minimum Lift Front: 0
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8" shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8" shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- CNC machined 6061 billet aluminum upper control arms allow for on-vehicle camber and caster adjustment
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint ball joints carry ICON's exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component and coil spring breakage or manufacturer defect
- This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XLT |
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 19-21 FORD RANGER 0-3.5" STAGE 3 SUSPENSION SYSTEM W TUBULAR UCalifornia AL KNUCKLE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XL |
- 19-23 FORD RANGER 0-3.5" STAGE 1 SUSPENSION SYSTEM
- Raises Front 0 (in) - 3.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON complete suspension systems lift your Ford Ranger while improving ride quality and performance. With endless hours spent testing and tuning our suspension components and shocks, you’ll have the best suspension solution on the market.
- 19-23 FORD RANGER 4WD 0-3.5" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33"x11.25" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6.00” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Dual Rate Coil Springs: No
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3.5
- Title: Icon 2019-2023 Ford Ranger, 0-3.5" Lift, Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- Up to 25% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8? shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8? shaft (2.5 Series shocks)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- ICON Vehicle Dynamics 2019-2023 Ford Ranger suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the new Ranger platform’s suspension and addressed any areas where performance could be extracted. The Stage 1 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2019-2023 Ford Ranger Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XL |
- with Tremor Package Raises Front 0 (in) - 2.5 (in) Up to 33x11.25 (in) Tire with Minor Fender Trimming with 1.5 (in) Maximum Lift Rear with Steel Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 20-23 FORD RANGER 0-3.5" STAGE 2 SUSPENSION SYSTEM W BILLET UCalifornia STEEL KNUCKLE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ford Ranger | Front and Rear | XLT |
Showing 1 - 10 of 129 products
Loading...