2021 Toyota Tundra Coilover Spring and Shock Assembly Parts
Choose your Submodel for your 2021 Toyota Tundra
Image
Product
Price
- SHOCKS
- 0"-2.5" FOX 2.0 PERFORMANCE SERIES FRONT COIL OVERS COILOVERS ARE ADJUSTABLE PRESET MAY VARY. PLEASE REFER TO FOX INSTRUCTION MANUAL FOR PROPER ADJUSTMENT CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIMS FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 876725F IS A PAIR OF FOX 2.0 PERFORMANCE SERIES COIL OVERS (ALUMINUM BODY)(0"-2.5" LIFT HEIGHT)
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2021 - Toyota Tundra | RWD |
- Raises Front 1.63 (in) - 3 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Requires Aftermarket Front Upper Control Arms 25 (mm) Offset Aftermarket Wheels Recommended
- These ICON coilovers feature 3.0 Series shocks and coil springs optimized for this application. The shock’s larger 3.0” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-21 TUNDRA/08-22 SEQUOIA 3.0 VS RR CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 254100g - 1 Gallon Icon Performance Shock Oil
- 302005 - 3.0 Icon Rebuild Kit (all)
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 1
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 600
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 3
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1.63
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Significant increase in damping ability for excellent performance in extreme off-road conditions
- Adjustable coilovers provide 1.63-3.5” of front lift height over stock
- Increased wheel travel and vehicle specific valving provides comfortable and consistent ride quality on and off-road
- ICON’s multi-stage, tunable hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
- Easy-to-adjust CDC Valve (Compression Damping Control) allows for end-user compression changes to suit all types of terrain and vehicle cargo configurations
- 10” aluminum reservoirs provide generous oil and nitrogen volume for consistent damping with temperature increase
- High quality ICON-engineered coil springs offer increased travel and performance
- PTFE lined COM12 spherical bearings ensure maximum strength and durability
- Heavy duty 1” CNC machined shock shafts
- Multi stage CAD plated shock body with hard anodized piston and top cap
- Direct bolt-in to OEM shock location makes for an easy install
- Fully serviceable
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- These 3.0 Series coilovers were designed as an OEM shock replacement, making install a simple and straightforward bolt-on affair. Built in ride height adjustability yields 1.63-3.5” of front lift height allowing for the fitment of larger, more aggressive wheel and tire combinations. First class ICON manufacturing processes and quality components such as ICON engineered coil springs and FK Rod End bearings are used to ensure these shocks function to their maximum potential without issue.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- 07-21 TUNDRA/08-22 SEQUOIA 2.5 VS RR COILOVER KIT
- Raises Front 1 (in) - 3 (in)
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-21 TUNDRA 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate:
- 600
- 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length yields maximum wheel travel
- Height-adjustable coilovers offer 1.-3" of lift height adjustment over stock
- 2.5" diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia. These adjustable coilovers allow up 1-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- Raises Front 1 (in) - 3 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming 25 (mm) Offset Aftermarket Wheels Recommended
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-21 TUNDRA/08-22 SEQUOIA 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 600
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length yields maximum wheel travel
- Height-adjustable coilovers offer 1.-3" of lift height adjustment over stock
- 2.5" diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia. These adjustable coilovers allow up 1-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- 07-21 TUNDRA/08-22 SEQUOIA 3.0 VS RR CDCV COILOVER KIT
- Requires Aftermarket Upper Control Arms Raises Front 1.63 (in) - 3 (in)
- These ICON coilovers feature 3.0 Series shocks and coil springs optimized for this application. The shock’s larger 3.0” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-21 TUNDRA 3.0 VS RR CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 254100g - 1 Gallon Icon Performance Shock Oil
- 302005 - 3.0 Icon Rebuild Kit (all)
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 1
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 600
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 3
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1.63
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Significant increase in damping ability for excellent performance in extreme off-road conditions
- Adjustable coilovers provide 1.63-3.5” of front lift height over stock
- Increased wheel travel and vehicle specific valving provides comfortable and consistent ride quality on and off-road
- ICON’s multi-stage, tunable hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
- Easy-to-adjust CDC Valve (Compression Damping Control) allows for end-user compression changes to suit all types of terrain and vehicle cargo configurations
- 10” aluminum reservoirs provide generous oil and nitrogen volume for consistent damping with temperature increase
- High quality ICON-engineered coil springs offer increased travel and performance
- PTFE lined COM12 spherical bearings ensure maximum strength and durability
- Heavy duty 1” CNC machined shock shafts
- Multi stage CAD plated shock body with hard anodized piston and top cap
- Direct bolt-in to OEM shock location makes for an easy install
- Fully serviceable
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- These 3.0 Series coilovers were designed as an OEM shock replacement, making install a simple and straightforward bolt-on affair. Built in ride height adjustability yields 1.63-3.5” of front lift height allowing for the fitment of larger, more aggressive wheel and tire combinations. First class ICON manufacturing processes and quality components such as ICON engineered coil springs and FK Rod End bearings are used to ensure these shocks function to their maximum potential without issue.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- 07-21 TUNDRA/08-22 SEQUOIA 2.5 VS RR COILOVER KIT
- 1 - 3 Lift
- These ICON coilovers feature 2.5 Series shocks and coil springs optimized for this application. The shock’s larger 2.5” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-UP TUNDRA 2.5 VS RR COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257337 - 7/8 Shaft 11.25 Oal, 7.00 Travel
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate:
- 600
- 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length yields maximum wheel travel
- Height-adjustable coilovers offer 1.-3" of lift height adjustment over stock
- 2.5" diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia. These adjustable coilovers allow up 1-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- 07-21 TUNDRA/08-22 SEQUOIA 3.0 VS RR CDCV COILOVER KIT
- 1.63" - 3" Lift Requires Aftermarket Upper Control Arms
- These ICON coilovers feature 3.0 Series shocks and coil springs optimized for this application. The shock’s larger 3.0” body and increased piston area improves damping ability and ride quality across varying types of terrain.
- 07-UP TUNDRA 3.0 VS RR CDCV COILOVER KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 254100g - 1 Gallon Icon Performance Shock Oil
- 302005 - 3.0 Icon Rebuild Kit (all)
- 611025 - 07 Tundra Co Hardware Kit Pair
- Shaft Diameter: 1
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 600
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys - 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys - 20x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Body Diameter: 3
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Manual
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 1.63
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: Yes
-
Features:
- Significant increase in damping ability for excellent performance in extreme off-road conditions
- Adjustable coilovers provide 1.63-3.5” of front lift height over stock
- Increased wheel travel and vehicle specific valving provides comfortable and consistent ride quality on and off-road
- ICON’s multi-stage, tunable hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
- Easy-to-adjust CDC Valve (Compression Damping Control) allows for end-user compression changes to suit all types of terrain and vehicle cargo configurations
- 10” aluminum reservoirs provide generous oil and nitrogen volume for consistent damping with temperature increase
- High quality ICON-engineered coil springs offer increased travel and performance
- PTFE lined COM12 spherical bearings ensure maximum strength and durability
- Heavy duty 1” CNC machined shock shafts
- Multi stage CAD plated shock body with hard anodized piston and top cap
- Direct bolt-in to OEM shock location makes for an easy install
- Fully serviceable
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- These 3.0 Series coilovers were designed as an OEM shock replacement, making install a simple and straightforward bolt-on affair. Built in ride height adjustability yields 1.63-3.5” of front lift height allowing for the fitment of larger, more aggressive wheel and tire combinations. First class ICON manufacturing processes and quality components such as ICON engineered coil springs and FK Rod End bearings are used to ensure these shocks function to their maximum potential without issue.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Toyota Tundra | Front |
- EIB Pro-Truck Coilovers
- Eibach 07-15 Toyota Tundra Pro-Truck Coilover 2.0 Front with Rear Res Shocks Kit
- Pair of Front Coilovers + Rear Reservoir Shocks
-
Features:
- Stage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks
- Height Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance
- Anodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.
- Individually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.
- Engineered, Tested and Manufactured by Eibach in the U.S.A.
- The PRO-TRUCK Sport Shock is the perfect solution for those looking for a straightforward, reliable damper setup that gains ground clearance, ride comfort and additional travel without requiring any additional suspension components. For optimal performance, PRO-TRUCK Sport Shocks are designed to be used in conjunction with Eibach PRO-LIFT-KIT springs.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Toyota Tundra |
- Up to 35x12.50 (in) Tire with Minor Fender Trimming Raises Front 0 (in) - 2.25 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2007-2021 TOYOTA TUNDRA FRONT 2.5 EXP SERIES COILOVER
- 07-21 TUNDRA FRONT 2.5 EXP COILOVER
- Product Attributes:
- AAP_UDA_12: Ea
- Dust Shield: No
- AAP_UDA_22: 1
- Upper Mount Type: Stem
- Coil Over Springs Included: No
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 2.25
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Minimum Lift: 0
- Material:
- Aluminum
- Steel
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for 2007-2021 Toyota Tundra
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride heights from 0-2.25” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- Impact extruded, hard anodized aluminum cylinder offer excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Toyota Tundra | Front | Trail |
Showing 1 - 9 of 9 products
Loading...