Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 660.7
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 394.0
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-293487, 76526R
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | Elevation |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 2-3" Rear Lift Requires appropriate bump stop extensions
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.12mm
- Extended Length (MM): 701.2
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 442.0
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
RS77269
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | Elevation |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Provides 0-1.5" Front Lift Without AT4 Off Road Package
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 550.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- PartType: Shocks / Struts
- Collapsed Length (MM): 413.6
- Boot Included: No
- Lower Mount Type: Bar Pin
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Adjustable spring seat offers 0-2.75in of lift, depending on the application
- Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2022 - GMC Sierra 1500 | Front | SLT | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.12mm
- Extended Length (MM): 701.2
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 442.0
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | AT4 |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.12mm
- Extended Length (MM): 633.2
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 399.0
- Boot Included: Black Straight
- Lower Mount Type: Eye 14.12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
RS77198
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | Elevation |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Provides 0-2.5" Front Lift Without AT4 Off Road Package
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 550.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- PartType: Shocks / Struts
- Collapsed Length (MM): 413.6
- Boot Included: No
- Lower Mount Type: Bar Pin
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Adjustable spring seat offers 0-2.75in of lift, depending on the application
- Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-293297, 985-62-012, RS77845
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Front | SLT |
- SHOCKS
- 0"-3" FRONT ADJUSTABLE LOWERING STRUT DOES NOT FIT MODELS W/ ACTIVERIDE, MAGNERIDE, OR AIR RIDE SETTING STRUTS AT 2" OF DROP OR MORE WILL NOT ALLOW FOR THE ALIGNMENT TO RETURN TO FACTORY SPECIFICATIONS SETTING STRUTS AT 3" OF DROP MAY CAUSE VEHICLE TO RIDE STIFF AND NOT ALIGN PROPERLY DOES NOT FIT TRAIL BOSS/AT4 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 0"-3" ADJUSTABLE LOWERING STRUTS
- MAXTRAC SUSPENSION'S PART# 371903 IS A PAIR OF 0"-3" FRONT ADJUSTABLE LOWERING STRUTS (PAIR) BLACK W/ COIL SEAT, RETAINER CLIP & RETAINER COLLAR
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - GMC Sierra 1500 |
- SHOCKS
- REAR SHOCK - 5-6" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, 1.5" WIDE SLEEVES FOR UP TO A 9/16"/14MM MOUNTING BOLT 20.3" EXTENDED, 12.4" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 2000LL-4 IS A SINGLE LOOP-TO-LOOP REAR SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - GMC Sierra 1500 |
- with 2 (in) Maximum Lift Rear Requires Slight Modifications to Rear Shock Mounts
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 07-23 GM 1500 0-2" REAR 2.0 VS IR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Bushing Material: Polyurethane
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: No
- Attributed Description: Icon Vehicle Dynamics; Shock Absorber; Adjustable: No; Boot Included: No; Coil Over Springs Included: No; Dust Shield: No; Gas Charged: Yes; Lower Mount Type: Eyelet; Shock Absorber Body End Measuring Point: Center Of Eyelet; Shock Absorber Rod End Measur
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir3
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | Pro |
- with 0 (in) Maximum Lift Rear Requires Slight Modifications to Rear Shock Mounts
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 07-23 GM 1500 0-2" REAR 2.0 VS IR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Bushing Material: Polyurethane
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: No
- Attributed Description: Icon Vehicle Dynamics; Shock Absorber; Adjustable: No; Boot Included: No; Coil Over Springs Included: No; Dust Shield: No; Gas Charged: Yes; Lower Mount Type: Eyelet; Shock Absorber Body End Measuring Point: Center Of Eyelet; Shock Absorber Rod End Measur
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir3
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - GMC Sierra 1500 | Rear | AT4 |
Showing 1 - 10 of 48 products
Loading...