2023 Ford Bronco Suspension Lift Kit Parts
Choose your Submodel for your 2023 Ford Bronco
Image
Product
Price
- 2021-2023 Ford Bronco 2in. Suspension Lift Kit-Front and Rear by
- 2 in. Lift; Front/Rear
- 2021-2023 Ford Bronco 2in. Suspension Lift Kit-Front and Rear by
- Lift Kit
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Simple Bolt On Installation No Strut Disassembly Required For Install
- Allows Fitment Of Up To 35 in. Tires
- Maintains A Factory Ride
- Factory Front And Rear Struts Are Retained
- Proudly Made In The USA
- KIT INCLUDES Four 2 in. Spacers And Hardware Kit
- Limited Lifetime Warranty
- Level your Ford Bronco with this extremely durable Tuff Country leveling kit. This simple-to-install leveling kit will raise your vehicle 2 inches front and rear. Once installed, this lift kit will allow for larger tires, and improve handling by eliminating excessive dive and roll while cornering. Tuff Country has been producing quality suspension products for over 30 years and is the originator of the 'leveling kit', backing all kits with a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford Bronco | V | - | 6 Cyl 2.7L | Black Diamond | 164 |
- 2021 Ford Bronco 3.5in. Suspension Lift Kit with Upper Control Arms
- 3.5 in. Lift; w/Upper Control Arm; Includes Bracket And Hardware
- 2021 Ford Bronco 3.5in. Suspension Lift Kit with Upper Control Arms
- Lift Kit
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Simple Bolt-On Installation No Strut Disassembly Required For Install
- Includes Upper Control Arms
- Proudly Made In The USA
- Limited Lifetime Warranty
- Tuff Country's 3.5 in. suspension lift kit is designed to make lifting your Ford Bronco simple and affordable. This kit includes Tuff Country Upper Control Arms which ensures proper geometry and alignment after the lift is installed, in-turn improving handling characteristics and suspension articulation. Not only that, but Tuff Country's Bronco kit improves your off-road capabilities and allows for a larger tire size to be installed. All systems are engineered to give the highest quality & best value on the market backed by a Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford Bronco | L | 2300 | 4 Cyl 2.3L | Everglades | 140 |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 3 SUSPENSION SYSTEM TUBULAR
- Raises Rear 2 (in) - 3 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods Raises Front 3 (in) - 4 (in) ; When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 3 SUSPENSION SYSTEM WITH TUBULAR UPPER CONTROL ARMS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 3 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: 21-up Bronco Non-sasquatch 3-4" Lift Stage 3 Suspension System Tubular
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned internal reservoir front and rear shocks for superior damping and vehicle control
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door non-Sasquatch Broncos
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 4 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 4 SUSPENSION SYSTEM TUBULAR
- Raises Rear 2 (in) - 3 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Hose Routing Kit Part Number 611072 Recommended if Equipped with OE Rear Lower Control Arms Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 4 SUSPENSION SYSTEM WITH TUBULAR UPPER CONTROL ARMS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 4 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: 21-up Bronco Non-sasquatch 3-4" Lift Stage 4 Suspension System Tubular
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 4 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM BILLET
- Raises Rear 2 (in) - 3 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods without Factory Installed Wheels Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 5 SUSPENSION SYSTEM WITH BILLET CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM BILLET
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: Icon 21-22 Bronco Non-sasquatch, 3-4" Lift Stage 5 Suspension System, Billet Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Billet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 4 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM BILLET
- Raises Rear 2.5 (in) - 3.5 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods without Factory Installed Wheels Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 5 SUSPENSION SYSTEM WITH BILLET CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM BILLET
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: Icon 21-22 Bronco Non-sasquatch, 3-4" Lift Stage 5 Suspension System, Billet Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Billet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 2 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM TUBULAR
- Raises Rear 2 (in) - 3 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Hose Routing Kit Part Number 611073 Recommended if Equipped with ICON Tubular Rear Lower Control Arms Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 5 SUSPENSION SYSTEM WITH TUBULAR CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: Icon 21-22 Bronco Non-sasquatch 3-4" Lift Stage 5 Suspension System, Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Tubular rear lower links improve rear end articulation and allow for pinion angle adjustment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 4 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM TUBULAR
- Raises Rear 2.5 (in) - 3.5 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Hose Routing Kit Part Number 611073 Recommended if Equipped with ICON Tubular Rear Lower Control Arms Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 5 SUSPENSION SYSTEM WITH TUBULAR CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 5 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: Icon 21-22 Bronco Non-sasquatch 3-4" Lift Stage 5 Suspension System, Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Tubular rear lower links improve rear end articulation and allow for pinion angle adjustment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 2 | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 6 SUSPENSION SYSTEM TUBULAR
- Raises Rear 2.5 (in) - 3.5 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Hose Routing Kit Part Number 611073 Recommended if Equipped with ICON Tubular Rear Lower Control Arms Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 6 SUSPENSION SYSTEM WITH TUBULAR CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 6 SUSPENSION SYSTEM TUBULAR
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: 21-up Bronco Non-sasquatch 3-4" Lift Stage 6 Suspension System Tubular
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Coilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Tubular rear lower links improve rear end articulation and allow for pinion angle adjustment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Ford Bronco | Front and Rear | Outer Banks |
- 21-22 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 7 SUSPENSION SYSTEM BILLET
- Raises Rear 2 (in) - 3 (in) Use Up To 35 (in) x 12.50 (in) Tires without Sasquatch Package For 37x12.50 (in) Tires Use Bump Stop Spacer Kit with ICON or OE Tie Rods without Factory Installed Wheels Raises Front 3 (in) - 4 (in) ; When Running 35" Tires High Clearance Crash Bar Kit Part Number 42000 is Recommended When Running 37" Tires Crash Bar Removal may be Required but is Not Recommended Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- 2021-2022 FORD BRONCO WITHOUT SASQUATCH PACKAGE 3-4" LIFT STAGE 7 SUSPENSION SYSTEM WITH BILLET CONTROL ARMS AND LINKS
- 21-23 BRONCO NON-SASQUATCH 3-4" LIFT STAGE 7 SUSPENSION SYSTEM BILLET
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Rear Spring Rate Type: Progressive Triple Rate
- Recommended Aftermarket Tires: 35" X 12.50" (recommend High Clearance Crash Bars Part Number 42000, 37" Tires Require Coilover Bump Stop Spacers Along With Trimming And Modifications)
- Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Coils Quantity Rear: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Front Spring Rate Type: Linear
- Spring Color: Black
- Maximum Lift: 4
- Coil Spring End 2 Type: Square
- Coil Spring End 1 Type: Square
- Title: 21-up Bronco Non-sasquatch 3-4" Lift Stage 7 Suspension System Billet
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Improved suspension performance and ride quality over stock
- Up to 11.5" front / 14” rear wheel travel with 35” tire fitment
- Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use
- Coilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
- Adjustable coilovers yield up to 3-4" of front lift height and 2-3” of rear lift height over stock 4-door Broncos without the Sasquatch package
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts
- ICON engineered coil springs featuring a unique triple rate rear coil design
- High strength alloy CNC machined lower bar pins
- Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.
- Billet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
- Adjustable billet rear upper links improve fuel tank clearance under max articulation and help further free up suspension bind
- Adjustable rear track bar helps to free up bind during rear suspension travel and articulation and offers on-vehicle rear end alignment
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- This suspension system is designed to provide up to 11.5" of front suspension travel and 14" of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37" and larger tires if using the optional up-travel limiters (sold separately). The factory crash bars on non-Sasquatch equipped Broncos must be removed to clear 35" and larger tires, but ICON now offers a replacement High Clearance Crash Bar set for those who would like to run larger tires and retain the functionality of the crash bars.
Additional Fitment Information:
| Vehicle | Position | Doors | Sub Model |
|---|---|---|---|
| 2023 - Ford Bronco | Front and Rear | 4 | Outer Banks |
Showing 1 - 10 of 212 products
Loading...