2023 Jeep Wrangler Coil Spring Set Parts
Choose your Submodel for your 2023 Jeep Wrangler
Freedom
Rubicon
Sport
Sport S
Unlimited Freedom
Unlimited High Altitude
Unlimited High Altitude 4xe
Unlimited High Tide
Unlimited Rubicon
Unlimited Rubicon 392
Unlimited Rubicon 4xe
Unlimited Rubicon Xtreme Sunrider
Unlimited Sahara
Unlimited Sahara 4xe
Unlimited Sahara Altitude
Unlimited Sahara High Altitude
Unlimited Sport
Unlimited Sport Altitude
Unlimited Sport S
Unlimited Willys
Unlimited Willys 4xe
Unlimited Willys Sport
Willys
Willys Sport
Image
Product
Price
- 3 in. Lift Front/
- Coil Spring Kit; 3 in. Lift Front/Rear;
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Corner specific Dual Rate coils springs provide a level stance side to side and offer factory load carrying capacity with a smooth ride. As a true dual rate coil, the first stage of the coil allows the spring to respond to small bumps for a very complaint ride at lower speeds. As the spring travels further, the rate increases to absorb larger impacts and support cargo in the Jeep Gladiator. These American made springs are the best on the market for all around driving while providing increased suspension travel for offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 2987 | 6 Cyl 3.0L | Unlimited Sport Altitude | 182 |
- 5 in. Lift Front/
- Coil Spring Kit; 5 in. Lift Front/Rear;
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Corner specific Dual Rate coils springs provide a level stance side to side and offer factory load carrying capacity with a smooth ride. As a true dual rate coil, the first stage of the coil allows the spring to respond to small bumps for a very complaint ride at lower speeds. As the spring travels further, the rate increases to absorb larger impacts and support cargo in the Jeep Gladiator. These American made springs are the best on the market for all around driving while providing increased suspension travel for offroad use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 2987 | 6 Cyl 3.0L | Unlimited Sport Altitude | 182 |
- 3 in. Lift; For PN [K4135DL/K4136DL]
- Coil Spring Kit; Rear; 3 in. Lift; For PN [K4135DL/K4136DL];
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Coil Spring Kit
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 3604 | Rear | GAS | 6 Cyl 3.6L | Unlimited Sport Altitude | 220 |
- 5 in. Lift; For PN [K4148DL/K4149DL]
- Coil Spring Kit; Rear; 5 in. Lift; For PN [K4148DL/K4149DL];
- Coil Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Coil Spring Kit
- Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2023 - Jeep Wrangler | V | 3604 | Rear | GAS | 6 Cyl 3.6L | Unlimited Sport Altitude | 220 |
- Raises Front 1.75 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - Jeep Wrangler | Front | DIESEL | Unlimited Willys Sport |
- Raises Front 2.5 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - Jeep Wrangler | Front | GAS | Unlimited Freedom |
- Raises Front 3 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - Jeep Wrangler | Front | GAS | Freedom |
- Raises Rear 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit -6 (mm) Offset Aftermarket Wheels Recommended ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier rear bumper/spare tire. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5" REAR DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Rear Spring Rate Type: Progressive Dual Rate
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Spring Material: Steel
- Service Parts: 611002 - Sway Bar Link Bushing And Sleeve Kit
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 2" rear increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- Includes swaybar links and bump stop spacers
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep Wrangler JL coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon JL) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Rear | Unlimited Rubicon Xtreme Sunrider |
- Raises Rear 2.0 (in) Replacement Coil Springs for Rancho RS66121BR5, RS66121BR9 System(s) Compatible shock absorber(s) to use are RS999066, RS77066, RS55066
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - Jeep Wrangler | Rear | GAS | Rubicon |
- Replacement Coil Springs for Kit Part Number RS66121BR5, RS66121BR9 Raises Rear 3.0 (in) Compatible shock absorber(s) to use are RS999066, RS77066, RS55066
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - Jeep Wrangler | Rear | GAS | Freedom |
Showing 1 - 10 of 13 products
Loading...