Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 0-2" without factory Off-Road Package For Rear Lifted Height: 0-1" with factory Off-Road Package Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 654.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 398.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-299946
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Coil | Rear Left | Big Horn |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Front Lift Height without factory Off-Road Package: 0-2.6"; With factory Off-Road Package: 0-2" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 560.9
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- Collapsed Length (MM): 406.5
- Boot Included: No
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Front | Coil | Big Horn |
- B8 5100 - Suspension Shock Absorber
- For Rear Lifted Height: 0-1" with factory Off-Road Package Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 645.9
- Reservoir: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 403.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Coil | Rear | Rebel |
- B8 5100 - Suspension Shock Absorber
- For Rear Lifted Height: 0-2" without factory Off-Road Package; 0-1" with factory Off-Road Package Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 645.9
- Reservoir: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 403.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Coil | Rear | Big Horn |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Front Lift Height: 0-2" Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 560.9
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- Collapsed Length (MM): 406.5
- Boot Included: No
- Lower Mount Type: Clevis
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-232203
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Front | Coil | Rebel |
- TRAIL PERFORMANCE (FRONT, LIFTED)
- Lowering Rate: F: 0.0-3.0"
- Shocks features include: Height adjustability, Hardened Chrome 18mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings
- Product Attributes:
- Title: Belltech 26020 Leveling Strut 2019-2023 Ram 1500 4wd (all Cabs) 0 To 3in.
-
Features:
- Ride Height adjustable
- Independent performance tuned 35mm compression and rebound valves
- 18mm piston rods
- 50mm shock bodies
- Progressive rate Polymer bumpstops
- Application specific (Non universal)
- Belltech Trail Performance level Lift Front Struts are designed as a performance replacement for today's Strut equipped Trucks and SUV's. In true Belltech style, the Trail Performance Lift Struts not only provide the performance & safety that you can only get from Belltech but offers the installer the choice on the amount of lift desired from one-part number. Thanks to our patented ring and perch system, you now have the ability to choose from oem stock height to as much as 3" of lift in half inch increments. The Trail Performance lift strut lineup has been engineered to provide a premium ride quality for today's trucks and SUV's. By focusing their attention on the low speed compression and rebound characteristics, the Belltech engineers have developed a great balance between comfort for your everyday commute and overall performance for those spirited drives or offroad adventures.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2023 - Ram 1500 | V | 2987 | 4 | Fleetside | United States | 6 Cyl 3.0L | Crew Cab Pickup | 4WD | Front | 67.4 | Limited Longhorn | 182 |
- Front; 6 in. Lift
- Adjustable Vertex Coilovers; Front; 6 in. Lift;
- Adjustable Vertex Coilovers
- Product Attributes:
- Shock Stroke: 6.300 In.
- WARNING CA Proposition 65: No
- Reservoir Type: Remote
-
Features:
- Extended Length: 28.05in/Collapsed Length: 21.79in
- Fits 4WD Models With 5.5 - 6.5In Of Lift
- Includes Driver And Passenger Side Front Coilovers
- 8-Stage Adjustable Damping Monotube Design
- Nitrogen-Charged Remote Reservoir w/Steel Braided Reservoir Line
- Massive 2.5in Piston/22mm Chrome-Hardened Piston Rod
- 3-Stage Seal System Heat-Treated
- Zinc Plate Finish With Double Clear Coat
- 400 Hour Salt Spray Rating
- 3-Year Manufacturers Warranty
- Behold: The pinnacle of off-road performance and smooth ride quality in an affordable package has arrived with Rough Countrys 2.5 Vertex 8-Stage Adjustable Reservoir Shocks. These high-performance reservoir shocks offer an elite ride-quality in every situation you face, with an 8-stage adjustable damping system that lets you perfectly dial-in your ride for whatever lies ahead. Whether you want a smooth ride for city streets or the ultimate damping for off-road mayhem, a quick spin of the dial lets you adjust each shock to the exact performance specifications you desire. Rough Countrys Nitrogen-charged Vertex Shocks feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. Each shock features a massive 2.5in diameter piston and a high-flow 22mm chrome hardened piston rod that simply dwarfs the competition. When it comes to investing in a high-end shock, youll be pleased to find that Rough Countrys 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock. A 3-stage, fortified seal system ensures your Vertex shocks keep kicking while the beautifully designed honed steel body offers a long lifespan of reliable performance and killer good looks. This shock is designed to be a true eye-catcher, with a beautiful silver finish, laser-etched RC logo, matching in.Vertex in. decals, and CNC-machined Billet Aluminum accents. Rear shocks feature a durable bracket system with laser-etched logo and a premium braided steel reservoir line. Includes an Industry-leading 3-year Warranty!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2023 - Ram 1500 | 4WD |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 0-2" without factory Off-Road Package For Rear Lifted Height: 0-1" with factory Off-Road Package Without Air Suspension
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 654.0
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 398.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-299267
Additional Fitment Information:
| Vehicle | Rear Spring | Position | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Coil | Rear Right | Big Horn |
- TRAIL PERFORMANCE (REAR, LIFTED)
- Shocks features include: Metal dust boots, Hardened Chrome 15mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings.
- Product Attributes:
- Title: Belltech Tp10513f Shock Absorber Trail Performance
-
Features:
- Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll
- Progressive rebound tuning complements large aftermarket wheels, keeping the ride smooth but firm and in control
- Large 45mm body diameters and twin tube design allow for larger oil volume and better heat dissipation leading to increased shock life
- Large 35mm piston and valves allow greater hydraulic control during quick wheel movements and long shock travel
- Low friction sealing and guide system? creates a quick reacting damper that is sensitive to the smallest of motions with little to no temperature increase during extreme damper conditions
- Steel dust cover adds protection for the piston rod, sealing system, and does not deteriorate from UV exposure or chemicals
- Tuned high durometer vulcanized rubber bushings reduce noise, vibration, and harshness (NVH)
- 2 Year Warranty - Unlimited Mileage
- The Belltech Trail Performance lift shock lineup has been engineered to provide a premium ride quality for today's trucks and SUV's. Our engineers focused their attention on tuning the low speed compression characteristics of this shock absorber, which is responsible for controlling your Sport Truck or SUV's pitch and roll, dive and squat to help keep you confident and in control. The "Progressive"rebound tuning will complement large aggressive offroad tires, keeping the ride smooth but firm and in control.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2023 - Ram 1500 | V | 3604 | 4 | Fleetside | United States | 6 Cyl 3.6L | Crew Cab Pickup | 4WD | Rear | 67.4 | Limited Longhorn | 220 |
- B6 4600 - Suspension Shock Absorber
- Without Air Suspension
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Lower Mount Type: Clevis
- Upper Mount Type: Stem
- Reservoir: No
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body (non-coilover)
- Body Diameter (ID): 46mm
- Spring Seat Included: Yes
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-228831, 68404035AD, 68404036AD, 68404037AD, 68417598AD, 68417598AE, 68417797AD
Additional Fitment Information:
| Vehicle | Position | Front Spring | Sub Model |
|---|---|---|---|
| 2023 - Ram 1500 | Front | Coil | Big Horn |
Showing 1 - 10 of 30 products
Loading...