2023 Toyota Sequoia Coilover Spring and Shock Assembly Parts
Choose your Submodel for your 2023 Toyota Sequoia
Image
Product
Price
- without TRD Off-Road Suspension Package Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 and Number 55156 Raises Front 3 (in) - 4.5 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS IR COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels: 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5" Lift/23 Sequoia 3-4.5" Lift, 2.5 Front Co Kit, Pair
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable ride height offers 1.25-3.5" of front lift over stock on Tundra or 3-4.5" of front lift over stock on Sequoia
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra and 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on a Tundra or 3-4.5" of lift height adjustability on a Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.0 or 2.5 Aluminum Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 and Number 55156 Raises Front 3 (in) - 4.5 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS IR COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels: 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5" Lift/23 Sequoia 3-4.5" Lift, 2.5 Front Co Kit, Pair
- Spring Material: Steel
- Remote Reservoir: No
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable ride height offers 1.25-3.5" of front lift over stock on Tundra or 3-4.5" of front lift over stock on Sequoia
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra and 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on a Tundra or 3-4.5" of lift height adjustability on a Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.0 or 2.5 Aluminum Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Capstone | 4WD |
- with TRD Off-Road Suspension Package Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 Raises Front 3 (in) - 4.5 (in) Up to 35x12.50 Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS RR COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Service Parts: 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels: 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5", 23 Sequoia 3-4.5" Lift, 2.5 Front Rr Co Kit, Pair
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable up to 1.25-3.5" of front lift height over stock (Tundra) or 3-4.5" of lift over stock (Sequoia)
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- 100% Bolt-on - no drilling, cutting or welding necessary for installation
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra or 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on Tundra or 3-4.5" of lift on Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. When paired with ICON 2.0 or 2.5 Aluminum Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | SR5 | 4WD |
- without TRD Off-Road Suspension Package Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 and Number 55156 Raises Front 3.5 (in) - 4.5 (in) Up to 35x12.50 Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS RR CDCV COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: Yes
- Service Parts: 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels: 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5"/23 Sequoia 3-4.5" Lift, 2.5 Co Kit Cdcv, Pair
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable up to 1.25-3.5" of front lift height over stock on Tundra or 3-4.5" of front lift on Sequoia
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON CDCV equipped for 10 settings of external compression damping adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra or 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on Tundra or 3.5-4.5" of front lift on Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. When paired with ICON 2.0 or 2.5 Aluminum Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- with TRD Off-Road Suspension Package Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 Raises Front 3.5 (in) - 4.5 (in) Up to 35x12.50 Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS RR CDCV COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: Yes
- Service Parts: 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels: 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5"/23 Sequoia 3-4.5" Lift, 2.5 Co Kit Cdcv, Pair
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable up to 1.25-3.5" of front lift height over stock on Tundra or 3-4.5" of front lift on Sequoia
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON CDCV equipped for 10 settings of external compression damping adjustment
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra or 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on Tundra or 3.5-4.5" of front lift on Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. When paired with ICON 2.0 or 2.5 Aluminum Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- Requires ICON front upper control arms for lift heights above 3.75" over stock Also Requires Part Number 55154 Raises Front 3 (in) - 4.5 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Also Requires Part Number 53508 and Number 57840EP or 57845EP ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS RR CDEV COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: Yes
- Service Parts: 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Damping Adjustment Type: Electronic
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5"/23 Sequoia 3-4.5", 2.5 Vs Front Co Kit W/cdev, Pair
- Minimum Lift: 1.25
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable up to 1.25-3.5" of front lift height over stock on Tundra or 3-4.5" of front lift on Sequoia
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDEV are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra and 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on Tundra or 3-4.5" of front lift on Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with ICON 2.5 or 3.0 Series CDEV rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Front | TRD Off-Road |
- without TRD Off-Road Suspension Package Requires ICON front upper control arms for lift heights above 3.75" over stock Raises Front 3 (in) - 4.5 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming Also Requires Part Number 53508 and Number 57840EP or 57845EP ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
- 22-23 TUNDRA/23 SEQUOIA 2.5 VS RR CDEV COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: Yes
- Service Parts: 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- Damping Adjustment Type: Electronic
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: Icon 22-23 Tundra 1.25-3.5"/23 Sequoia 3-4.5", 2.5 Vs Front Co Kit W/cdev, Pair
- Minimum Lift: 1.25
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable up to 1.25-3.5" of front lift height over stock on Tundra or 3-4.5" of front lift on Sequoia
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks with CDEV are an incredible upgrade for the front end of the 2022-2023 Toyota Tundra and 2023 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on Tundra or 3-4.5" of front lift on Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with ICON 2.5 or 3.0 Series CDEV rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- without TRD Off-Road Suspension Package Also Requires Part Number 55154 and Number 55156 Raises Front 0 (in) - 2.13 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
- 22-23 TUNDRA/23 SEQUOIA FRONT 2.5 EXP COILOVER
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Stem
- Coil Over Springs Included: No
- Recommended Aftermarket Wheels: 17x8.5" With 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 3
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Title: Icon 2022-2023 Toyota Tundra Front Exp Coilover
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for 2022-2023 Toyota Tundra and 2023 Sequoia
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride heights from 0-3” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- Impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- The 2022-2023 Toyota Tundra/2023 Toyota Sequoia EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the truck’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Tundra’s OE upper shock and spring mounts. The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically designed to fit the vehicle’s OE coil spring. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0" to 3” of lift over stock. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra/Sequoia in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- with TRD Off-Road Suspension Package Also Requires Part Number 55154 Raises Front 0 (in) - 2.13 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
- 22-23 TUNDRA/23 SEQUOIA FRONT 2.5 EXP COILOVER
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Stem
- Coil Over Springs Included: No
- Recommended Aftermarket Wheels: 17x8.5" With 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 3
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Title: Icon 2022-2023 Toyota Tundra Front Exp Coilover
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for 2022-2023 Toyota Tundra and 2023 Sequoia
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride heights from 0-3” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- Impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- The 2022-2023 Toyota Tundra/2023 Toyota Sequoia EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the truck’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Tundra’s OE upper shock and spring mounts. The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically designed to fit the vehicle’s OE coil spring. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0" to 3” of lift over stock. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra/Sequoia in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota Sequoia | Front | Limited | 4WD |
- Also Requires Part Number 55154 Raises Front 0 (in) - 2.13 (in) Up to 35x12.50 (in) Tire with Minor Fender Trimming ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- Based on ICON’s 2.5 Series, these EXP shocks bridge the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance, and maximum travel, all in one economical package.
- 22-23 TUNDRA/23 SEQUOIA FRONT 2.5 EXP COILOVER
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Recommended Aftermarket Tires: 35" X 12.50" (minor Fender Trimming And Modifications May Be Required)
- Upper Mount Type: Stem
- Coil Over Springs Included: No
- Recommended Aftermarket Wheels: 17x8.5" With 5.75” Backspace / 25mm Offset
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Boot Included: No
- Damping Type: Oil
- Maximum Lift: 3
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Shoulder Of Stem
- Adjustable Damping: No
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Title: Icon 2022-2023 Toyota Tundra Front Exp Coilover
- Service Parts: 252010 - 2.5 Ifp Rebuild Kit
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
- Shaft Diameter: 0.875
-
Features:
- Vehicle specific design for 2022-2023 Toyota Tundra and 2023 Sequoia
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride heights from 0-3” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- Impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- The 2022-2023 Toyota Tundra/2023 Toyota Sequoia EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the truck’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Tundra’s OE upper shock and spring mounts. The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically designed to fit the vehicle’s OE coil spring. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0" to 3” of lift over stock. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra/Sequoia in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Front | TRD Off-Road |
Showing 1 - 10 of 29 products
Loading...