Image
Product
Price
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-23 TUNDRA/23 SEQUOIA BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color:
- Gray
- Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | TRD Off-Road |
- Also Requires Part Number 55153; May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | TRD Pro |
- Also Requires Part Number 55153; May not be compatible with other manufacturer’s 6" lift kits
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | TRD Pro |
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA BILLET REAR LOWER LINK KIT
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-23 TUNDRA/23 SEQUOIA BILLET REAR LOWER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Control Arm Material: Aluminum
- Finish: Anodized
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: Yes
- Construction: Billet
- Reinforced: Yes
-
Features:
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear lower link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Lower | TRD Pro |
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA BILLET REAR LOWER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Control Arm Material: Aluminum
- Finish: Anodized
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: Yes
- Construction: Billet
- Reinforced: Yes
-
Features:
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear lower link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Lower | TRD Off-Road |
- The ICON Tubular Rear Lower Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA TUBULAR REAR LOWER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Rod End Bearing
- Control Arm Material: Dom Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Bushing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- High clearance Lower Link design for reduced contact with obstacles
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Lower Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, and 2024 Toyota Tacoma to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These lower links are designed specifically for high clearance for reduced contact with trail obstacles and massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Lower | TRD Off-Road |
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- without Auto-Leveling Headlights; May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-23 TUNDRA/23 SEQUOIA BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color:
- Gray
- Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | Limited |
- without Auto-Leveling Headlights; May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | Limited |
- Also Requires Part Number 55153 with Auto-Leveling Headlights ; May not be compatible with other manufacturer’s 6" lift kits
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | Limited |
- Also Requires Part Number 55153 with Auto-Leveling Headlights ; May not be compatible with other manufacturer’s 6" lift kits
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota Sequoia | Rear Upper | Limited |
Showing 1 - 10 of 28 products
Loading...