Image
Product
Price
- without Tremor Package with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4.5 (in) - 6 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | GAS | Lariat | Crew Cab Pickup | 4WD |
- with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4 (in) - 5.5 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | DIESEL | XLT | Crew Cab Pickup | 4WD |
- with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4.5 (in) - 6 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | GAS | XLT | Crew Cab Pickup | 4WD |
- with Dual Rear Wheels (DRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4 (in) - 5.5 (in) Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | DIESEL | XLT | Crew Cab Pickup | 4WD |
- without Tremor Package with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4 (in) - 5.5 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | DIESEL | Lariat | Crew Cab Pickup | 4WD |
- with Tremor Package with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 3 (in) - 4.5 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | DIESEL | Lariat | Crew Cab Pickup | 4WD |
- with Tremor Package with Single Rear Wheels (SRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 3.5 (in) - 5 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | GAS | Lariat | Crew Cab Pickup | 4WD |
- with Dual Rear Wheels (DRW) Also Requires Part Number 93502 and Number 37705EP Raises Front 4.5 (in) - 6 (in) Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model | Body | Drive Type |
|---|---|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | GAS | XLT | Crew Cab Pickup | 4WD |
- without Tremor Package with Single Rear Wheels (SRW) Also Requires Part Number 4 (in) and Number 5.5 (in) Raises Front 4 (in) - 5.5 (in) 6 (mm) Offset Aftermarket Wheels Recommended Use Up To 37 (in) x 12.50 (in) Tires Requires iOS operated device to run ICON Intelligent Control App Requires removal of the coil centering cup in factory coil bucket
- ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
- 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
- Product Attributes:
- AAP_UDA_22: 1
- Grade Type: Performance
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 6.25
- Adjustable Damping: Yes
- Material:
- Aluminum
- Steel
- Service Parts:
- 191016 - 7.5" Finned Resi Upgrade Kit
- 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257338 - 7/8 Shaft 12.25 Oal, 8.00 Travel
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Recommended Aftermarket Tires: 37" X 12.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 5.00” Backspace / 6mm Offset
- Icon Alloys - 18x9" W/ 5.25” Backspace / 6mm Offset
- Icon Alloys - 20x9" W/ 5.25” Backspace / 6mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Damping Adjustment Type: Electronic
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Bolt-in system fits in OE coil bucket location
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2024 - Ford F-350 Super Duty | Front | DIESEL | King Ranch |
Showing 1 - 9 of 9 products
Loading...