2024 Lexus GX550 Suspension Control Arm Kit Parts
Image
Product
Price
- Also Requires Part Number 55161
- The ICON Tubular Rear Upper Link System helps free up rear axle movement to allow for increased suspension travel and articulation. Formed using DOM steel tubing for high strength, with CNC machined threaded ends and bushing housings.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 TUBULAR REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Powdercoated
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Black
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- Adjustable for various lift heights & driveline angles
- Help free rear suspension bind compared to OE links
- CNC machined & notched 1026 DOM steel construction with semi-gloss black powder coat finish
- Multi durometer bushings for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Fabricated components covered under ICON's Limited Lifetime Warranty
- The ICON Tubular Rear Upper Link System helps free up rear axle movement on the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and the 2024 Lexus GX550 to allow for increased suspension travel and articulation. Formed using 1 ¾” x .313 wall DOM Tubing for high strength, with CNC machined threaded ends and bushing housings, and feature a multi-stage black powder coat finish. These upper links are designed with massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Lexus GX550 | Rear Upper |
- Also Requires Part Number 55161
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 22-24 TUNDRA/23-24 SEQUOIA/24 TACOMA/LC250/GX550 BILLET REAR UPPER LINK KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color:
- Black
- Silver
- End 1 Type: Bushing
- Finish: Anodized
- Control Arm Material: Aluminum
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Thread In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Material: Aluminum
- AAP_UDA_12: Ea
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: No
- Attachments Included: No
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- Vehicle specific design
- On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON’s billet aluminum rear upper link arms for the 2022-2024 Toyota Tundra, 2023-2024 Toyota Sequoia, 2024 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, and 2024 Lexus GX550 are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Lexus GX550 | Rear Upper |
- with 1.25 (in) - 3 (in) Suspension Lift 40 (mm) Offset Aftermarket Wheels Recommended Use Up To 33 (in) x 11.50 (in) Tires
- ICON tubular UCAs feature 1026 DOM tube construction, urethane bushings, and ICON’s rebuildable Delta Joint PRO, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 24 TACOMA/24 LC250/24 GX550 TUBULAR UCalifornia DJ PRO KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Set: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- End 1 Type: Bushing
- Finish: Powdercoat
- Control Arm Material: Dom Steel
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Adjustable Control Arm: No
- Suspension Type: Spring
- Material: Dom Steel
- AAP_UDA_12: Ea
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- 17x8.5" With 5.75” Backspace / 25mm Offset
- Icon Alloys - 18" X 9" With 6.6" Backspace / 40mm Offset
- California Prop 65 Warning: Yes
- Pre-Assembled: Yes
- Grease Fitting Included: Yes
- Attachments Included: No
- Pre-Greased: Yes
- Construction: Tubular
- Reinforced: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Lexus GX550 | Front Upper |
Showing 1 - 3 of 3 products
Loading...