Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Pressue plate and clutch disc only; the release bearing is not included (order separately).
- The OE Service clutch kit is pressure plate and clutch disc only (the release bearing is serviced separately from the OE Service clutch kit). The release bearing IS included with the Exedy, LuK, Sachs, and Valeo clutch kits.
- w/o Release Bearing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | 6 Cyl 3.0L | EX | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Pressue plate and clutch disc only; the release bearing is not included (order separately).
- with Release Bearing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | 6 Cyl 3.0L | EX | - |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 34%
- Torque Capacity (ft/lbs.): 458
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1.031
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use With Act Flywheel (included In Kit). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 33.3
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AT2-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | Manual | SOHC | 6 Cyl 3.0L | EX | - |
- ACT Heavy Duty Race Sprung 4 Pad Clutch Kit
- HD/Race Sprung 4 Pad
- HD/Race Sprung 4 Pad
- Product Attributes:
- Torque Capacity Over OE: 72%
- Torque Capacity (ft/lbs.): 587
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1.031
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use With Act Flywheel (included In Kit). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 32.7
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AT2-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | Manual | SOHC | 6 Cyl 3.0L | EX | - |
- ACT Heavy Duty Race Rigid 6 Pad Clutch Kit
- HD/Race Rigid 6 Pad
- HD/Race Rigid 6 Pad
- Product Attributes:
- Torque Capacity Over OE: 72%
- Torque Capacity (ft/lbs.): 587
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1.031
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Solid
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use With Act Flywheel (included In Kit). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 31.3
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AT2-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad rigid race discs are made with high quality, ceramic friction materials. The chrome-moly hub is heat-treated for strength and durability. The lightweight, rigid design allows for quicker shifts and smooth, trouble-free service. With the 6-pad rigid race disc, engagement is harsher, but shifting is faster. The 6-pad rigid race disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | Manual | SOHC | 6 Cyl 3.0L | EX | - |
- ACT Heavy Duty Race Rigid 4 Pad Clutch Kit
- HD/Race Rigid 4 Pad
- HD/Race Rigid 4 Pad
- Product Attributes:
- Torque Capacity Over OE: 72%
- Torque Capacity (ft/lbs.): 587
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1.031
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Solid
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use With Act Flywheel (included In Kit). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 30.8
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AT2-HDR4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad rigid race discs are made with high quality, ceramic friction materials. The chrome-moly hub is heat-treated for strength and durability. The lightweight, rigid design allows for quicker shifts and smooth, trouble-free service. With the 4-pad rigid race disc, engagement is harsher, but shifting is faster. The 4-pad rigid race disc is well-suited for the smaller disc sizes in smaller engines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | Manual | SOHC | 6 Cyl 3.0L | EX | - |
- ACT Heavy Duty Race Sprung 6 Pad Clutch Kit
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- Torque Capacity Over OE: 72%
- Torque Capacity (ft/lbs.): 587
- Grade Type: Performance
- Pilot Bearing Included: Yes
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Pilot Bushing Included: No
- Input Shaft Diameter: 1.031
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use With Act Flywheel (included In Kit). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 32.7
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AT2-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Honda Accord | V | 2997 | Manual | SOHC | 6 Cyl 3.0L | EX | - |
Showing 1 - 7 of 7 products
Loading...