2017 Ram 3500 Automatic Transmission Shift Kit Parts
Choose your Engine for your 2017 Ram 3500
Image
Product
Price
- BD Protect68 Gasket Plate Kit Dodge 6.7L 2007.5-2018 68RFE Transmission
- Includes Valve Body Separator Plate And Gaskets;
- BD Protect68 Gasket and Separator Plate Kit Dodge 6.7L 2007.5-2018 68RFE Transmission
- Protect68 Gasket Plate Kit
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1071220x
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ideal for use with EFI Live, HP Tuners or other transmission pressure tuning
- Recommended full throttle max line pressure 225-250psi
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
- Heavy duty accumulator plate to prevent accumulator blowout
- Kit includes pan gasket, 3 doughnut seals and check ball
- This kit requires custom transmission tuning or an additional module to command higher line pressure
- Industry leading custom bonded gasket valve body separator plate substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures - up to 250psi. Kit includes a heavy duty accumulator plate to prevent accumulator blow-out. Ideal for use with EFI Live, HP Tuners, and other transmission pressure tuning.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Electronic 68RFE PressureLoc Dodge 2007.5-2018 6.7L
- Increases Main Line Clutch Apply Pressure When Lockup Clutch Engaged; 68RFE transmissions;
- Electronic 68RFE Inline Electronic PressureLoc Dodge 2007.5-2018 6.7L
- PressureLoc 68RFE
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Progressive pressure increase gives smooth engagements with lower load on the pump at idle
- Achieve shorter shifts and increased torque capacity without creating low-speed harshness
- Improved clutch holding capacity for increased durability
- Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges
- Advance control integrated chip eliminates the occasional error code caused by resistor based devices
- Easy to install in-line plug module
- Easy to install inline plug module progressively increases mainline pressure giving smooth engagements with lower load on the pump at idle. Achieves shorter shifts and increased torque capacity without creating low-speed harshness and improves clutch holding capacity for increased durability. Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges, and, advance control integrated chip eliminates the occasional error code caused by resistor based devices.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018
- Includes Valve Body Separator Plate, Gaskets and Pressure Control Module;
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018 c/w Separator and Accumulator Plate
- ProTect 68RFE Transmission Kit
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1062022
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Upgraded 68RFE Accumulator Plate
- Dynamic control ramps up the much larger sweep
- Prevent clutch slippage
- Kit includes pan gasket, 3 doughnut seals and check ball
- Installation takes 2-to-3 hours
- 56% more theoretical holding power
- No full transmission relearn required - quick relearn suggested
- A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
- No tuning required
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty accumulator plate to prevent accumulator blowout
- Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
- Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
- ProTect68 Transmission Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 3 of 3 products
Loading...