2004 Ford F 250 Super Duty BD Diesel Parts
Choose your Engine for your 2004 Ford F-250 Super Duty
Image
Product
Price
- Elbow
- Boot; Elbow;
- Boot
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Boot
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- BD 6.0L Powerstroke Exhaust Manifold Set Ford 2003-2007
- BD 6.0L Powerstroke Exhaust Manifold Set Ford 2003-2007 F-250/F-350 SuperDuty
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1041483
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Heavy walled manifolds for improved durability
- Coated to resist corrosion
- Pre-drilled for pyrometer probes
- Includes manifold gaskets
- Heavy walled manifolds for improved durability. Manifolds are coated to resist corrosion and are pre-drilled for pyrometer probes. These units replace the old rusted and leaking stock exhaust manifolds that normally require extensive cleaning and machine work to be recovered from warping and distortion. The manifold set comes with both passenger & driver's side units and feed pipe mounting hardware. With the stock manifolds considered a maintenance item due to corrosion and leaking, this set is an excellent preventative replacement item whenever doing other engine work.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- GASKET KIT, EGR COOLER - Ford 2004-2007 6.0L w/Square Tube
- Square Tube;
- GASKET KIT, EGR COOLER - Ford 2004-2007 6.0L withSquare Tube
- EGR Cooler Gasket Set
- Product Attributes:
- Category: Egr Coolers
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1032121
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket Set for 2004-2007 square tube EGR Cooler
- Gasket Set including O-rings, connector tube, spacers and other hardware needed for removing and reinstalled 2004-2007 square tube EGR Cooler.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- BD 6.0L Powerstroke Up-Pipes Kit w/EGR Connector - Ford 2004.5-2007
- Late 2004 model year;
- BD 6.0L Powerstroke Up-Pipes Kit withEGR Connector - Ford 2004.5-2007
- UpPipes
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1057934
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Fully EGR compatible - Meets emission requirements
- Ductile cast iron Y-pipe design is a perfect fit and eliminates leaks and weld failures
- Larger diameter 304 stainless steel Up-Pipes includes internally shielded stainless steel expansion bellows
- V-band connections provide a flexible, easy aligning tight fit
- Stainless steel up-pipe clamps included
- Maximizes your turbo response time and eliminates exhaust leaks
- Fully divided Y-pipe optimizes turbo spool
- Smoother internal Y-pipe geometry than competitors up-pipe designs
- Replaces the factory exhaust up-pipes (exhaust manifold to the turbo) which are prone to leakage due to deterioration. BD up-pipes are designed to minimize restriction to the turbo utilizing internally shielded expansion bellows. The turbo Y-adapter is made from high-silicon ductile iron. The BD up-pipes are a durable, longer-life replacement for this common PowerStroke problem and are perfect as an upgrade while performing other engine or transmission repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- EGR Cooler Replacement - Ford 2003-2004 6.0L w/Round Tube (up to 09/22/2003)
- Round Tube Cooler Replacement; Up to 09-22-2003;
- EGR Cooler Replacement - Ford 2003-2004 6.0L PowerStroke w/Round Tube (up to 09/22/2003)
- EGR Cooler
- Product Attributes:
- Category: Egr Coolers
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1032121
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 5-Year Limited Warranty
- Replacement Heavy Duty EGR Coolers for 2003-2007 6.0L Ford Power Stroke Diesels
- TIG welded 304L stainless 0.375in.O.D. x 0.048in. walled tubes replace the OEM inner cores
- Water deflectors added to increase turbulence to flow to aid in heat dissipation
- Includes O-ring and threaded insert
- Prevents premature failure due to weak brazed joints
- Pressure tested
- BD's replacement Heavy Duty EGR Coolers for the 2003-2007 6.0L Ford Power Stroke Diesels use TIG welded 304L stainless 0.375 in. O.D. x 0.048 in. walled tubes to replace the OEM inner cores that have been known to fail due to weak brazed joints. The failure of the OEM units has caused coolant to leak into the cylinders creating a hydrolock condition which will cause sever engine damage. Water deflectors are added to increase turbulence to the coolant flow to aide in heat dissipation. These exchange units are pressure tested, include O-ring and threaded insert. No performance tuner required and will not activate the engine light.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- BD TowMaster Ford 5R110 Transmission & Converter Package 2003-2004 4wd
- Includes HD Transmission Pan; 5R110 4wd transmissions; Includes multi-disc torque converter;
- BD TowMaster Ford 5R110 Transmission & Converter Package - 2003-2004 4wd
- Performance Transmission
- Product Attributes:
- Drivetrain: 4wd/2wd Flange
- Category: Auto Trans & Converter Packages
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1041242
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Furnace-brazed fins
- Up to triple the amount of lock-up clutch material
- Clutch Count: DIRECT 6 (20% increase over stock)
- Clutch Count: OVERDRIVE 5 (67% increase over stock)
- Each transmission is dyno tested
- BD aluminum HD deep pan, increases oil capacity by 6qt
- Upgraded sump filter
- Replace plastic pressure plugs in valve body with aluminum
- Heavy duty snap ring and blow-off valve to prevent runaway pressure damaging case
- Reworked front pump
- Increase the durability of your drivetrain
- Clutch Count: COAST CLUTCH 3
- Clutch Count: FORWARD 4
- Clutch Count: LOW REVERSE 6
- TORQUE CONVERTOR:
- Clutch Count: INTERMEDIATE 5 (67% increase over stock)
- Enhanced Stall - Street/Towing applications
- Torque multiplying cast aluminum stators
- Lower rpm response than the stock converter
- More efficient operation
- Less heat and better fuel economy
- Stamp-forged steel front cover
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- Billet Input Shaft Ford 1999-2010 4R100/5R110
- 4R100 / 5R110 Transmission;
- Billet Input Shaft Ford 7.3L/6.0L/6.4L PowerStroke 1999-2010 4R100/5R110
- Billet Input Shaft
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1062124-4
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Increase the durability of your transmission
- Increase the durability of your transmission with input, output and intermediate Billet Shafts rated up to 300M and 300 Maraging that are designed to take the shock from high horsepower and heavy loads.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- CCV Replacement Filter Element
- Replacement Element For Filter Kit PN[1032175]
- CCV Replacement Filter Element (1032170/1032175 Kits)
- Crank Case Vent Filter Element
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Category: Crank Case Filter Kit
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1032121
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Replacement filter element for 1032170/1032175 Crank Case Vent Filter kits
- Filter element for 1032170/1032175 Crank Case Vent Filter kits to be replaced every 30,000 miles / 1-year.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- Elbow
- Boot; Elbow;
- Boot
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Boot
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- BD 6.0L Powerstroke EGR Cooler Ford 2004-07 E/F w/Square Tube (after 09/22/2003)
- Square Tube Cooler Replacement; After 09-22-2003;
- BD 6.0L Powerstroke EGR Cooler Replacement - Ford 2004-2007 Pick-ups & Vans w/Square Tube (after 09/22/2003)
- EGR Cooler
- Product Attributes:
- Category: Egr Coolers
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1900204
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 5-Year Limited Warranty
- Replacement Heavy Duty EGR Coolers for 2003-2007 6.0L Ford Power Stroke Diesels
- TIG welded 304L stainless 0.375in.O.D. x 0.048in. walled tubes replace the OEM inner cores
- Water deflectors added to increase turbulence to flow to aid in heat dissipation
- Includes O-ring and threaded insert
- Comes with 1900204 Gasket Set
- Prevents premature failure due to weak brazed joints
- Pressure tested
- BD's replacement Heavy Duty EGR Coolers for the 2003-2007 6.0L Ford Power Stroke Diesels use TIG welded 304L stainless 0.375 in. O.D. x 0.048 in. walled tubes to replace the OEM inner cores that have been known to fail due to weak brazed joints. The failure of the OEM units has caused coolant to leak into the cylinders creating a hydrolock condition which will cause sever engine damage. Water deflectors are added to increase turbulence to the coolant flow to aide in heat dissipation. These exchange units are pressure tested, include O-ring and threaded insert. No performance tuner required and will not activate the engine light.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Ford F-250 Super Duty | V | - | 8 Cyl 6.0L | 363 |
Showing 1 - 10 of 53 products
Loading...