2011 Ram 3500 BD Diesel Parts
Choose your Submodel for your 2011 Ram 3500
Image
Product
Price
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge 2007.5-2018
- S363SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S363sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018 2500/3500/4500/5500
- Injector Line Set
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050551
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM quality
- Corrosion resistant
- Exact fit (no adjustment needed by end user)
- Preformed to the correct factory specifications
- Stock replacement fuel injector feed lines for Cummins 6.7L Common Rail engines. Replaces OE Part #: 68005438AA(x2), 68005435AA, 68005437AA, 68005336AA(x2). Replaces Cummins Part #: 4935974 (x2), 4935976, 4935981, 4935982 (x2).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L Cummins
- Killer Frost Plug Plate
- Product Attributes:
- Category: Killer Frost Plug Plate
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050333
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Works with the frost plug in place, blown out, or leaking
- No need to punch the old frost plug out
- Utilizes one large #333 O-ring
- Works with and without a TCC crossover tube
- Five flanged head bolts to keep the coolant contained
- 6.7L require the bellhousing support bracket to be removed
- Perfect time to install one is when the transmission is removed!
- The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Turbo Stock Replacement Dodge 2007.5-2012 Pick-up HE351
- The Speed Sensor typically is not needed to be replaced during remove and reinstall, and, is not included with this turbo;
- BD 6.7L Cummins Turbo Stock Replacement Dodge/RAM 2007.5-2012 Pick-up HE351
- Reman HE351 Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1045965
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- VSR high speed balanced
- Comes with actuator and gaskets
- Each actuator is calibrated and tested prior to shipping
- Specializing in remanufacturing turbos, BD offers units for Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota, automotive, light duty pick-up, agriculture, marine, commercial, industrial, gas and diesel applications. Quality exchange OEM turbochargers remanufactured in our shop, staffed with experienced industry-leading personnel. Fully equipped with manual and CNC lathes, high speed VSR precision balancer, precision grinders, measuring instruments, pressure blasters and wheelabrators.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- For Use w/PN [1032002/1032003/1032004]
- Steering Bar Bearing; For Use w/PN [1032002/1032003/1032004];
- Steering Bar Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Steering Bar Bearing
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ram 3500 |
- BD Dodge Front Differential Cover AA 14-9.25 - 2500 2003-2013 / 3500 2003-2012
- AA 14-9.25;
- BD Dodge Front Differential Cover AA 14-9.25 - RAM 2500 2003-2013 / RAM 3500 2003-2012
- Front Diff Cover
- Product Attributes:
- Category: Diff Covers
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1061825-rcs
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Cast Aluminum Internal and external cooling fins
- Separate fill and drain port
- Stainless steel allen head cap bolts, fill plug
- Magnetic drain plug
- Add a stylish look to your front end with a BD Front Diff cover. Made from cast aluminum, BD differential covers have both internal and external fins for extra cooling plus a sleek curved design. Comes with separate fill and drain ports with stainless steel plugs for easier servicing. Includes stainless steel Allen head cap bolts and magnetic drain plug to help capture suspended material in the oil. Designed to be compatible with aftermarket track bars.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge 2007.5-2024 6.7L
- 68RFE transmission;
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge/RAM 2007.5-2022 6.7L Cummins
- Big Stack Shaft & Plates
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 16 Overdrive friction surfaces
- 33% increased torque holding capacity
- Billet QT100 Reaction plates
- Longer clutch engagement area
- 33% more steel mass for better heat absorption
- Raybestos clutches B29308L / B29309L are required (included in BD Build-It kits)
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 119 products
Loading...