2013 Ram 2500 BD Diesel Parts
Choose your Engine for your 2013 Ram 2500
Image
Product
Price
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags
- 4wd; w/o OEM Rear Airbags;
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 witho OEM Rear Airbags
- Traction Bars
- Product Attributes:
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- No welding required
- 54-inch eye-to-eye length
- 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends
- Prevents wheel hop, axle wrap and large angles on U-joints
- No adjustment is needed when pulling or hauling
- Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop
- Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs
- Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars
- All necessary hardware and Rivet-nut specific drill bit and tool included
- A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018 Pick-up
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Open Grid X-Intake Dodge 2007.5-2018 2500/3500
- Eliminates Cold Weather Intake Air Heater;
- BD 6.7L Cummins Open Grid X-Intake Dodge/RAM 2007.5-2018 2500/3500
- X-Intake Air Grid
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041563
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Eliminates restrictive stock cold weather intake air heater grid
- 35% larger opening cools EGT's and improves turbo response
- For cold weather operation, optional Intake Heater available for use with BD 6.7L X-Flow Intake horns
- Bolt the X-Flow Intake Elbow to our 6.7L Intake Open Grid for additional flow and performance! By removing the grid heating element, the Open Grid Plate increases the opening by 35%, eliminating the restrictive bottle neck found in the factory intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Turbo Mounting Kit - Dodge 6.7L 2007.5-2018 HE351 / HE300VG
- For HE351 or HE300VG turbos;
- BD Turbo Mounting Kit - Dodge/RAM 6.7L 2007.5-2018 HE351 / HE300VG
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 30mm studs
- 1 of HE3xx Gasket
- 1 of Oil Drain Gasket
- 4 of Dowty Sealing Washers for HE3xx turbo
- Speed sensor o-rings
- All Fasteners are at least Class 8.8
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Stage 3 Performance CR Pump & Injectors Package Dodge 2007.5-18
- R900 pump and set of 6 injectors (120 hp);
- BD 6.7L Cummins Stage 3 Performance CR Pump & Injectors Package - Dodge 2007.5-2018
- Stage 3 Pump & Injector Package
- Product Attributes:
- Category: Performance Pumps
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050071
- Stage Level: Stage 3
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- R900 PUMP
- 72% increase in capacity / displacement
- Delivers enough fuel to support up to 800rwhp
- Maintains rail pressure
- All that fuel without going to a dual pump system
- New design cam shaft with modified plungers and stroke
- Long-term durability with consistent on-demand high fuel pressure supply
- Provides efficient atomization resulting in more power, better combustion and lower EGT's
- HPCP3 injection pump is fully tested before leaving our facility
- INJECTORS
- OE quality nozzles are extrude honed
- Increased atomization
- Assembled using OE procedures
- Calibrated on computerized OE equipment resulting in flow matched sets
- 53% Over
- 12mm Stroke Camshaft made from custom alloy steel that is 9x tougher than 52100
- For the ultimate in street performance without any extra modifications, drop-in a stock looking CP3 pump and Common Rail injectors that are far from stock performance levels. With the hood open, your friends will never know what you got! CP3 injection pump with 12mm stroke camshaft is engineered with modified plungers to produce up to 5.25 LPM versus the stock 3.05LPM. Upgraded shaft material and heat treating process yields a stronger more durable shaft, with 9x greater fracture toughness! Long-term durability with consistent on-demand high fuel pressure supply that provides efficient atomization resulting in more power, better combustion and lower EGT's. Flow matched, high performance exchange common rail (CR) injectors use OE nozzles that are extrude honed for increased flow and atomization, and, are assembled using OE procedures and fully calibrated and tested to ensure perfect performance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Electronic 68RFE PressureLoc Dodge 2007.5-2018 6.7L
- Increases Main Line Clutch Apply Pressure When Lockup Clutch Engaged; 68RFE transmissions;
- Electronic 68RFE Inline Electronic PressureLoc Dodge 2007.5-2018 6.7L
- PressureLoc 68RFE
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Progressive pressure increase gives smooth engagements with lower load on the pump at idle
- Achieve shorter shifts and increased torque capacity without creating low-speed harshness
- Improved clutch holding capacity for increased durability
- Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges
- Advance control integrated chip eliminates the occasional error code caused by resistor based devices
- Easy to install in-line plug module
- Easy to install inline plug module progressively increases mainline pressure giving smooth engagements with lower load on the pump at idle. Achieves shorter shifts and increased torque capacity without creating low-speed harshness and improves clutch holding capacity for increased durability. Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges, and, advance control integrated chip eliminates the occasional error code caused by resistor based devices.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Xtrude Transmission Cooler with Fan - Complete Kit for 1/2in Lines
- 0.5 in. Tubing;
- Xtrude Transmission Cooler with Fan - Complete Kit for 1/2in Lines (Dodge/Ford)
- Xtruded Transmission Cooler
- Product Attributes:
- Category: Trans Coolers
- Engine: Motorhome Diesel Power
- Suggested Product: 1061825
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 22% more cooling over other designs
- Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan
- 33,930 BTU/HR and in excess of 30,000 GVW!
- Kits complete with all fittings, clamps, hoses and hardware
- Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal
- 200 Micro Extruded passages
- The pre-wired loomed harness with fuse and relay comes with plug-in connectors
- Dodge 47RH / 47RE / 48RE / 68RFE - 1/2-inch Cooler Lines
- Ford 5R110/6R140 - 1/2-inch Cooler Lines)
- Large surface area to transfer heat for external air flow cooling
- Turbulent oil flow design promotes a more complete cooling
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE ProForce Enhanced Stall Torque Converter - Dodge 2007.5-2024 6.7L
- Enhanced Stall;
- BD 68RFE ProForce Enhanced Stall Torque Converter - Dodge/RAM 2007.5-2022
- Double Disc Torque Conveter
- Product Attributes:
- Category: Torque Converters
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1041221
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Good for 550 flywheel HP
- Ideal replacement for stock torque converter
- High performance Enhanced stall stator
- Great for street and towing applications
- Lower rpm response than the stock converter
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Damper springs replaced
- 11.625 inch dual-clutch
- Billet forged front cover with thicker walls and stronger mounting pads
- The BD 68RFE ProForce Torque Converter is designed for stock and modified 6.7L Diesels, from 350 to 550 flywheel horsepower, used in street and towing applications, at a great price. Featuring BD's exclusive "Enhanced Stall" performance cast aluminum stator that improves efficiency and durability for low RPM response in stock to higher horsepower applications. The 68RFE ProForce uses a billet forged front cover machined with thicker walls and stronger mounting pads and a 11.625 inch dual-clutch. The turbine fins are furnace-brazed for improved fluid coupling efficiency and new piston damper springs are installed for longevity and durability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Build-It Dodge 68RFE Transmission Kit 2007.5-2018 Stage 4 Master Kit c/w ProTect 68
- Stage 4 Kit w/ProTect 68; 68RFE transmission;
- BD Build-It RAM 6.7L Cummins 68RFE Transmission Kit 2007.5-2018 Stage 4 Master Kit c/w ProTect 68
- Build-It Transmission Kit
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1600189
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Seal - Solenoid Pack Connector, 4wd Output Shaft, 2wd Output Shaft, Input Shaft
- Seal Kit - 2-4C, Input Drum, Solenoid Pack, Internal, External
- Heavy duty accumulator plate to prevent accumulator blowout
- O-Ring - pump Cover
- Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
- Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Upgraded One Way Clutch/Sprag
- Over Drive clutches 17% increase and Under Drive clutches 20% increase
- Qty 2: Check Balls 1/4in
- Qty 7: Reverse Clutch Friction, Reverse Clutch Steel
- Qty 3: 2C Clutch Friction, 2C Clutch Steel, 4C Clutch Friction, 4C Clutch Steel
- Qty 15: OD Clutch Friction, OD Clutch Steel
- Filter - Pan, Spin On
- Pump Cover
- Billet OD/Reverse Selector Plate, OD/UD Reaction Plate
- Stiffer Billet Intermediate Reaction Plate, Billet Over Drive/Rev Reaction Plate
- Billet 4C Spring Retaining Ring
- Gasket Kit - Oil Cooler, Oil Pan, Solenoid Pack
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge 2007.5-2024 6.7L
- 68RFE transmission;
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge/RAM 2007.5-2022 6.7L Cummins
- Big Stack Shaft & Plates
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 16 Overdrive friction surfaces
- 33% increased torque holding capacity
- Billet QT100 Reaction plates
- Longer clutch engagement area
- 33% more steel mass for better heat absorption
- Raybestos clutches B29308L / B29309L are required (included in BD Build-It kits)
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 113 products
Loading...