Image
Product
Price
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags
- 4wd; w/o OEM Rear Airbags;
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 witho OEM Rear Airbags
- Traction Bars
- Product Attributes:
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- No welding required
- 54-inch eye-to-eye length
- 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends
- Prevents wheel hop, axle wrap and large angles on U-joints
- No adjustment is needed when pulling or hauling
- Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop
- Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs
- Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars
- All necessary hardware and Rivet-nut specific drill bit and tool included
- A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge 2007.5-2018
- S364SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S364sxe/80 1.00 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Turbo Mounting Kit - Dodge 6.7L 2007.5-2018 HE351 / HE300VG
- For HE351 or HE300VG turbos;
- BD Turbo Mounting Kit - Dodge/RAM 6.7L 2007.5-2018 HE351 / HE300VG
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 30mm studs
- 1 of HE3xx Gasket
- 1 of Oil Drain Gasket
- 4 of Dowty Sealing Washers for HE3xx turbo
- Speed sensor o-rings
- All Fasteners are at least Class 8.8
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018 Pick-up
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package 2007.5-18 4wd
- 4wd; Includes Heavy Duty Pan and Billet Input Shaft; Includes multi-disc torque converter;
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd c/w Billet Input Shaft
- Transmission 68RFE
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041221
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Trapezoid teeth design
- Engineered tighter tolerances
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Thrust bearings - not plastic thrust washers
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- Cast stator designs maximizes torque
- New sprag components ensure long term durability
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Reduced overall weight by 12lbs compared to competitors
- Hard anodized valve body and new solenoid pack installed in every unit
- BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
- Performance Transmission but with the added touch of a Billet Input Shaft to take the "snap" from rapid throttle and high horsepower
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty cam & roller design low reverse one way clutch
- New 4C billet spring retainer
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Custom Big Stack overdrive shaft
- BD reinforced accumulator plate
- TCC limit valve machined and sleeved to address high wear area with in pump
- TORQUE CONVERTOR:
- Triple Disc
- Enhanced Stall - Street/Towing applications
- HD springs absorb shock of engagement
- Stamp forged 1-piece cover
- Eliminates warpage from clutch heat
- Taller cover can be rebuilt more often
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- For Use w/PN [1032002/1032003/1032004]
- Steering Bar Bearing; For Use w/PN [1032002/1032003/1032004];
- Steering Bar Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Steering Bar Bearing
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ram 3500 |
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge 2007.5-2024 6.7L
- 68RFE transmission;
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge/RAM 2007.5-2022 6.7L Cummins
- Big Stack Shaft & Plates
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 16 Overdrive friction surfaces
- 33% increased torque holding capacity
- Billet QT100 Reaction plates
- Longer clutch engagement area
- 33% more steel mass for better heat absorption
- Raybestos clutches B29308L / B29309L are required (included in BD Build-It kits)
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 120 products
Loading...