2016 Ford F 250 Super Duty BD Diesel Parts
Choose your Engine for your 2016 Ford F-250 Super Duty
Image
Product
Price
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019 F250/F350/F450/F550
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1057932
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD 6r140 Pressure Enhancer Ford 2011-2019 6.7L
- BD 6r140 Advance Pressure Enhancer Ford 2011-2019 6.7L
- Pressure Enhancer
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1031320
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Will not conflict with existing transmission tuning.
- Delivers up to 320 PSI of apply pressure
- 79% increase in holding power
- Prevents clutch slippage
- Prevents shift flare
- Increased durability due to higher clutch holding capacity
- Fast and simple installation
- No tuning required
- The Ford 6R140 transmission varies line pressure between 70 and 170 psi. This works well for stock trucks but for heavy duty use and higher horsepower applications this may be insufficient. BD's PressureLoc for the 6R140 is a solenoid replacement that overrides the transmission line pressure to maximize output enabling the transmission to handle higher horsepower. The BD PressureLoc will allow the transmission to produce 250-300psi, substantially increasing clutch holding power which prevents clutch slippage and premature clutch failure.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD 6.7L Powerstroke Exhaust Manifold Passenger Side - Ford 2015-2019
- CARB EO D-553-17; Includes complete set of longer studs and spacers plus all gaskets;
- BD 6.7L Powerstroke Exhaust Manifold Passenger Side - Ford 2015-2019 F250 / F350 Pick-up & 2017-2019 F350 / F450 / F550 Cab-Chassis & 2016-2019 F650
- Exhaust Manifold Passenger Side
- Product Attributes:
- Category: Manifolds
- Engine: 6.7l Powerstroke 11-16
- Suggested Product: 1043008
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 state legal
- Machined thicker bolting flange
- Includes the longest stud and spacer kit that fits across all 8-cylinders
- Longer exhaust studs improve thermal durability
- Thick spacers are black oxide coated
- Designed using computation fluid dynamics
- Exhaust ports are gasket matched
- High temperature POR 15 black coated
- Gaskets included: exhaust manifold, cross over tube, EGR port
- M8 stud install tool included
- Fully EGR compatible
- Passenger Side
- High-silicon ductile cast iron
- 75% thicker walls retain heat and prevents warping
- BD focused on solving one of the Ford 6.7L common failures, the exhaust manifolds. Crafted with a heavy duty 0.275" thick-walled Hi-Silicon ductile casting, this makes these manifolds 75% thicker to combat cracking due to high exhaust temperatures. Thermal durability has been improved with longer exhaust studs and spacers plus thicker, more durable machined bolting flanges. Fully EGR compatible, BD's exhaust manifold set is the perfect replacement for reliability and peace of mind.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- Poly Bushing Kit - Ford Track Bar 1032110/1032111
- 4wd;
- Poly Bushing Kit - Ford Track Bar (1032110/1032111) 2005-2022 F-250/F-350/F-450/F-550
- Track Bar Bushing Kit
- Product Attributes:
- Category: Suspension
- Engine: 6.7l Powerstroke 11-16
- Suggested Product: 1032113
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Replacement Poly bushing set for 1032110
- Replacement Poly bushing set for 1032110 and 1032111 track bar kits.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- Xtrude Transmission Cooler with Fan - Complete Kit for 1/2in Lines
- 1/2 in. Tubing; 5R110 transmission;
- Xtrude Transmission Cooler with Fan - Complete Kit for 1/2in Lines (Dodge/Ford)
- Xtruded Transmission Cooler
- Product Attributes:
- Category: Trans Coolers
- Engine: Motorhome Diesel Power
- Suggested Product: 1061825
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 22% more cooling over other designs
- Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan
- 33,930 BTU/HR and in excess of 30,000 GVW!
- Kits complete with all fittings, clamps, hoses and hardware
- Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal
- 200 Micro Extruded passages
- The pre-wired loomed harness with fuse and relay comes with plug-in connectors
- Dodge 47RH / 47RE / 48RE / 68RFE - 1/2-inch Cooler Lines
- Ford 5R110/6R140 - 1/2-inch Cooler Lines)
- Large surface area to transfer heat for external air flow cooling
- Turbulent oil flow design promotes a more complete cooling
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD's Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- BD 6R140 Transmission Pressure Controller - Ford 11-19 6.7L Powerstroke
- BD 6R140 Transmission Pressure Controller - Ford 2011-2019 6.7L Powerstroke
- Pressure Controller
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1030385
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 76% more theoretical holding power
- Delivers up to 300psi line pressure at WOT
- Only active when boost over 15psi, unlike solenoid foolers or plugs which are active all the time
- Does not create parasitic load or extra heat when inactive
- No transmission relearn required
- Installs in under an hour
- The 6R140 Pressure Controller for 2011-2019 Ford Power Stroke 6.7L pick-ups delivers up to 300psi line pressure inside the transmission, giving 76% more theoretical holding power and helping prevent burned-up clutches - a great way to increase the longevity of the 6R140 transmission for towing, street and race applications. Unlike simple solenoid foolers or plugs which are active all the time, the 6R140 Pressure Controller is only operational when the turbo boost exceeds 15psi, and, does not create extra heat when inactive or cause clunky/unusual shifts. Installs quickly in under an hour.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD 6.7L Powerstroke Exhaust Manifold Kit - Ford 2015-2019
- CARB EO D-553-17; Includes complete set of longer studs and spacers plus all gaskets;
- BD 6.7L Powerstroke Exhaust Manifold Kit - Ford 2015-2019 F250 / F350 Pick-up & 2017-2019 F350 / F450 / F550 Cab-Chassis & 2016-2019 F650
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1057932
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 state legal
- Longer exhaust studs improve thermal durability
- Thick spacers are black oxide coated
- Designed using computation fluid dynamics
- Exhaust ports are gasket matched
- High temperature POR 15 black coated
- Gaskets included: exhaust manifold, cross over tube, EGR port
- M8 stud install tool included
- Fully EGR compatible
- High-silicon ductile cast iron
- 75% thicker walls retain heat and prevents warping
- Machined thicker bolting flange
- Includes the longest stud and spacer kit that fits across all 8-cylinders
- BD focused on solving one of the Ford 6.7L common failures, the exhaust manifolds. Crafted with a heavy duty 0.275" thick-walled Hi-Silicon ductile casting, this makes these manifolds 75% thicker to combat cracking due to high exhaust temperatures. Thermal durability has been improved with longer exhaust studs and spacers plus thicker, more durable machined bolting flanges. Fully EGR compatible, BD's exhaust manifold set is the perfect replacement for reliability and peace of mind.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD 6.7L Power Stroke Screamer Turbo - Ford 2015-2016 F250/F350 Pick-Up
- BD 6.7L Power Stroke Screamer 64mm Turbo - Ford 2015-2016 F-250/F-350 Pick-Up
- Screamer Turbo
- Product Attributes:
- Category: Performance Kits
- Engine: 6.7l Powerstroke 11-16
- Suggested Product: 1043008
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 64.0mm Billet compressor wheel
- Up to 81lb/min of airflow
- VSR high speed balanced
- Includes updated pedestal and coolant tube for a drop-in install
- Built using a brand new Garrett Turbo
- Custom mixed flow turbine (MFT) wheel with a large 65mm exducer
- Drop-in stock-appearing turbo
- Increased airflow without compromising on low end drivability
- Large 65mm 'mixed flow' turbine wheel increases turbine flow and retains efficiency
- More boost, lower drive pressure, and lower EGT's
- No tuning required and does not set engine codes
- The drop-in, stock-appearing Screamer turbo for the later model Ford 6.7L Powerstroke utilizes modern turbo technology that delivers increased airflow without compromising on low end response. Boost pressure can be increased to improve horsepower potential. The Powerstroke Screamer turbo works with any "box" tuner and further improvements achieved with custom tuning. Drop-in turbo includes the updated 2017-2019 pedestal, coolant line and gaskets for a drop-in replacement on your 2015-2016 vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- Cool Down Timer Kit v2.0
- Not compatible with push button start on Ford vehicles;
- Cool Down Timer Kit v2.0 For K-Type EGT Probe
- Cool Down Timer V2.0
- Product Attributes:
- Category: Cool Down Timer
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1081130
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Prevent turbo damage during hot engine shutdown
- EGT, time and manual controlled shutdown
- Works with any K-Type EGT probe
- Compatible with most OEM vehicle security alarms
- Dodge 1994-2005 5.9L Cummins
- Ford 1994-2018 PowerStroke 7.3L/6.0L/6.4L/6.7L (w/o Push Button Start)
- Chevy 2001-2014 Duramax 6.6L
- Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- Exhaust Brake Remote Air - Ford 6.7L 2011-2016
- Remote Air 4.0in;
- Exhaust Brake Remote Air - Ford 6.7L 2011-2016 Air Actuated Remote Mount Valve c/w Air Compressor
- EXHAUST BRAKE
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: 6.7l Powerstroke 11-16
- Suggested Product: 1045800
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Over 65psi of retarding back pressure
- BD's solid, offset butterfly
- Rugged, cast-iron housings
- BD's exclusive alumibronze bushing
- Piston ring-seals
- Stainless steel butterfly shaft
- Proven to stand-up under the harsh, high heat conditions of the exhaust environment
- BD's exclusive Variable Orifice Technology
- IP67 sealed air compressor included
- Warm Up mode available to help bring engine up to normal operating temperature quicker when at idle
- Kit fits 4in and 5in exhaust
- All mounting hardware provided
- There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.
- Adjustable pressure regulation
- Pneumatic spring loaded cylinder
- It has been almost 30 years since we started shipping our first exhaust brakes. With that many hill and mountain roads experienced, we used the knowledge gained to continue to deliver the best designed exhaust brake for your application. Incorporating BD's exclusive Variable Orifice Technology, BD's solid, offset butterfly, spring loaded cylinder and pressure regulation provides up to 150 retarding horsepower throughout the engine's RPM range - not just at high rpm like some designs that use holes or additional parts and claim it as a better idea. A range of rugged, cast-iron housings for Dodge, Ford, Chevy and motor home applications that incorporate BD's exclusive alumibronze bushing, piston ring-seals and stainless steel butterfly shaft has proven to stand-up under the harsh, high heat conditions of the exhaust environment. BD's butterfly valve and rotating shaft are made of stainless steel to resist corrosion. An air compressor is included in most kits for newer pick-up trucks.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
Showing 1 - 10 of 18 products
Loading...