2017 Ram 2500 BD Diesel Parts
Choose your Engine for your 2017 Ram 2500
Image
Product
Price
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags
- 4wd; w/o OEM Rear Airbags;
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 witho OEM Rear Airbags
- Traction Bars
- Product Attributes:
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- No welding required
- 54-inch eye-to-eye length
- 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends
- Prevents wheel hop, axle wrap and large angles on U-joints
- No adjustment is needed when pulling or hauling
- Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop
- Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs
- Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars
- All necessary hardware and Rivet-nut specific drill bit and tool included
- A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge 2007.5-2018
- S364SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S364sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
- Direct replacement for stock turbo and exhaust manifold;
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018 2500/3500
- Screamer Turbo & Manifold Package
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045965
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TURBOCHARGER:
- Experience quick spool times and low drive pressures with an overall increase in performance
- 50-STATE LEGAL!
- Fully EGR compatible
- Open throat outlet flange outperforms the stock manifold
- CARB EO No D-553-5
- Drops in to the stock location
- Can support modifications up to 690HP
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- VSR high speed balanced
- Each actuator is calibrated and tested prior to shipping
- MANIFOLD:
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE351 Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Larger porting design than others will handle any increase in power
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge 2007.5-2018
- S363SXE/76 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S363sxe/76 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge 2007.5-2018
- S364SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S364sxe/80 1.00 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge 2007.5-2018
- S366SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S366sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 66mm 2.60in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 87 Lb./min
- Approximate rated 650hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins T4 Exhaust Manifold Dodge 2007.5-2018 2500/3500 Pick-up
- For T4 mount turbo;
- BD 6.7L Cummins T4 Exhaust Manifold Dodge/RAM 2007.5-2018 2500/3500 Pick-up
- Exhaust Manifold
- Product Attributes:
- Turbo Mount Flange: T4
- Pick-up or Cab&Chassis: Pick-up
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Larger porting design than others maximizes T4 turbocharger's potential power
- Fully divided pulse manifold design
- 6.7L performance replacement manifold for use T4 mount turbochargers (S300,S400,etc.)
- Fully divided pulse manifold design, allows for quicker turbo response
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- Experience quick spool times and low drive pressures with an overall increase in performance
- Fully EGR compatible
- Gaskets set with EGR port, exhaust port and turbo mount gaskets available separately - P/N 1045992-T4
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Turbo Mounting Kit - Dodge 6.7L 2007.5-2018 HE351 / HE300VG
- For HE351 or HE300VG turbos;
- BD Turbo Mounting Kit - Dodge/RAM 6.7L 2007.5-2018 HE351 / HE300VG
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 30mm studs
- 1 of HE3xx Gasket
- 1 of Oil Drain Gasket
- 4 of Dowty Sealing Washers for HE3xx turbo
- Speed sensor o-rings
- All Fasteners are at least Class 8.8
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Open Grid X-Intake Dodge 2007.5-2018 2500/3500
- Eliminates Cold Weather Intake Air Heater;
- BD 6.7L Cummins Open Grid X-Intake Dodge/RAM 2007.5-2018 2500/3500
- X-Intake Air Grid
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041563
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Eliminates restrictive stock cold weather intake air heater grid
- 35% larger opening cools EGT's and improves turbo response
- For cold weather operation, optional Intake Heater available for use with BD 6.7L X-Flow Intake horns
- Bolt the X-Flow Intake Elbow to our 6.7L Intake Open Grid for additional flow and performance! By removing the grid heating element, the Open Grid Plate increases the opening by 35%, eliminating the restrictive bottle neck found in the factory intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018 Pick-up
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 111 products
Loading...