2017 Ram 3500 BD Diesel Parts
Choose your Engine for your 2017 Ram 3500
Image
Product
Price
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge 2007.5-2018
- S364SXE/80 1.00AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S364SXE/80 1.00AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064264
- Wheel Size: S364sxe/80 1.00 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 64.5mm 2.54in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 1.00
- Flow: 82 Lb./min
- Approximate rated 600hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge 2007.5-2018
- S366SXE/80 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S366SXE/80 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S366sxe/80 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 66mm 2.60in
- Turbine Wheel: 80mm 3.15in
- A/R Ratio: 0.91
- Flow: 87 Lb./min
- Approximate rated 650hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
- Direct replacement for stock turbo and exhaust manifold;
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018 2500/3500
- Screamer Turbo & Manifold Package
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045965
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TURBOCHARGER:
- Experience quick spool times and low drive pressures with an overall increase in performance
- 50-STATE LEGAL!
- Fully EGR compatible
- Open throat outlet flange outperforms the stock manifold
- CARB EO No D-553-5
- Drops in to the stock location
- Can support modifications up to 690HP
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- VSR high speed balanced
- Each actuator is calibrated and tested prior to shipping
- MANIFOLD:
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE351 Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Larger porting design than others will handle any increase in power
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- HE300VG Turbo Actuator - Dodge 2013-2018 6.7L Cummins
- HE300VG Turbo Actuator - RAM 2013-2018 6.7L Cummins
- Turbo Actuator
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045779
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- The actuator is a common failure on the HE351/HE300VG turbos
- OEM Holset replacement part
- Same actuator used on Screamer turbos
- No Core Charge!
- The actuator is a common failure on the HE351/HE300VG turbos; OEM Holset replacement part; Same actuator used on Screamer turbos; No Core Charge!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Exhaust Manifold Ram 3500/4500/5500 Cab & Chassis 6.7L Cummins 2013-2018
- Cab and Chassis;
- BD Exhaust Manifold Ram 3500/4500/5500 Cab & Chassis 6.7L Cummins 2013-2018 HE351 Turbo Mount
- Exhaust Manifold
- Product Attributes:
- Turbo Mount Flange: He351 (oem)
- Pick-up or Cab&Chassis: Cab-chassis 2013-2018
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045779
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE300VG Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Gasket matched ports with smooth internal geometry to maintain optimal performance and efficiency
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- Fully EGR compatible
- BD's pulse manifold for the RAM Cab & Chassis vehicles is made from thicker-walled high-silicon ductile iron that is designed to resist thermal warping, plus withstand extreme temperatures and vibration. Engineered with state of the art modelling software to optimize pulse flow for optimal turbo spool and performance. Precision slip joint allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018
- BD Injector Line Set Dodge Dodge/RAM 6.7L Cummins 2007.5-2018 2500/3500/4500/5500
- Injector Line Set
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050551
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM quality
- Corrosion resistant
- Exact fit (no adjustment needed by end user)
- Preformed to the correct factory specifications
- Stock replacement fuel injector feed lines for Cummins 6.7L Common Rail engines. Replaces OE Part #: 68005438AA(x2), 68005435AA, 68005437AA, 68005336AA(x2). Replaces Cummins Part #: 4935974 (x2), 4935976, 4935981, 4935982 (x2).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Open Grid X-Intake Dodge 2007.5-2018 2500/3500
- Eliminates Cold Weather Intake Air Heater;
- BD 6.7L Cummins Open Grid X-Intake Dodge/RAM 2007.5-2018 2500/3500
- X-Intake Air Grid
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041563
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Eliminates restrictive stock cold weather intake air heater grid
- 35% larger opening cools EGT's and improves turbo response
- For cold weather operation, optional Intake Heater available for use with BD 6.7L X-Flow Intake horns
- Bolt the X-Flow Intake Elbow to our 6.7L Intake Open Grid for additional flow and performance! By removing the grid heating element, the Open Grid Plate increases the opening by 35%, eliminating the restrictive bottle neck found in the factory intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- For Use w/PN [1032002/1032003/1032004]
- Steering Bar Bearing; For Use w/PN [1032002/1032003/1032004];
- Steering Bar Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Steering Bar Bearing
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Ram 3500 |
Showing 1 - 10 of 119 products
Loading...