Image
Product
Price
- BD E-PAS Positive Air Shut-Off 6.7L Cummins Dodge 2019-2024 Pick-up/Cab-Chassis
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Cummins - Dodge 2019-2024 Pick-up / Cab-Chassis
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep
- BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Controls
- Engine: Jeep
- Suggested Product: 1061827
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 State Legal
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Easy to install with factory connections
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- BD 6.7L Cummins Turbo Stock Replacement Dodge 2019-2023 HE300VG
- BD 6.7L Cummins Turbo Stock Replacement Dodge 2019-2023 Pick-up / Cab & Chassis HE300VG
- Exhange Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1045999
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Drops in to the stock location
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- Includes BD's HE300 Turbo Mounting Kit (PN: 1045999) with all the necessary hardware for your turbo install
- A drop-in stock installation, stock remanufactured replacement. This turbo is made from core turbochargers remanufactured with high-speed balancing and high-quality replacement bearings. Specializing in remanufacturing turbos, BD offers units for Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota, automotive, light duty pick-up, agriculture, marine, commercial, industrial, gas and diesel applications. Quality exchange OEM turbochargers remanufactured in our shop, staffed with experienced industry-leading personnel. Fully equipped with manual and CNC lathes, high speed VSR precision balancer, precision grinders, measuring instruments, pressure blasters and wheelabrators.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 Pick-up HE300VG
- BD Screamer 6.7L Cummins Turbo RAM 2019-2022 2500/3500 Pick-up HE300VG
- Screamer Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 50-STATE LEGAL!
- Enables quicker turbo response
- Replaces OEM Parts: 5456364, 5456365, 68444771AA, 68444771AB, 5498271RX, 5554227
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- CARB EO No. D-553-14
- Allows for higher turbine gas flow & increased efficiency
- Can support modifications up to 690 HP
- Drops into the stock location
- Includes BD's HE300 Turbo Mounting Kit (PN: 1045999) with all the necessary hardware for your turbo install
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with performance modifications. No extra parts to install, just drop-in and enjoy the extra power potential.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L
- 68RFE or Aisin AS69RC transmission;
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L 2500/3500/4500/5500
- Thermostat Bypass
- Product Attributes:
- Category: Trans Coolers
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030606-1/2
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ensures 100% fluid flow through the transmission cooler
- Keeps your transmission temperature as low as possible
- Fits 68RFE & Aisin AS69RC Transmission
- Eliminates factory bypass valve
- Debris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keeps the transmission cooler operational all the time and eliminates this failure prone item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- DEEP SUMP TRANSMISSION PAN DODGE/RAM AISIN AS69RC 13-24
- Aisin AS69RC transmission;
- DEEP SUMP TRANSMISSION PAN DODGE/RAM AISIN AS69RC 2013-2024
- Heavy Duty Transmission Pan
- Product Attributes:
- Category: Transmissions Pans
- Engine: 6.7l Cummins 19-up
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- High volumes of cool oil equate to long transmission life
- Pans increase oil capacity
- Aluminum construction and heat-dissipating fins keep temperature down
- Increased rigidity prevents case twisting
- Kit includes a magnetic drain plug and temperature sending unit port
- Adds 3.5qt!
- Fits 2013-2024 Dodge/Ram Aisin AS69RC Transmissions
- High volumes of cool oil equate to long transmission life. BD's transmission pans increase oil capacity, while their aluminum construction and heat-dissipating fins keep temperature down. As an added bonus, the pan's increased rigidity prevents case twisting. Kit includes screws, plugs, a magnetic drain plug, OEM style gasket and temperature sending unit port.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- 68RFE Threaded Filter Adapter - Dodge/RAM 2007.5-2024 6.7L
- 68RFE Threaded Replacement Filter Adapter - Dodge/RAM 2007.5-2022 6.7L Cummins
- 68RFE THREADED FILTER ADAPTER
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1061525
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Billet steel adapter for 68RFE spin-on filter
- Replaces the brittle plastic adapter
- This billet steel adapter replaces the brittle plastic piece used to mount your spin on filter to your 68RFE Transmission.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 7 of 7 products
Loading...