Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Silverado; Sierra 1500 (Concealed Main Body
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13301 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet Silverado; GMC Sierra 1500
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, LD, Limited and GMC Sierra 1500, LD, Limited (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - GMC Sierra 1500 | V | 6162 | Rear | 8 Cyl 6.2L | Denali | 376 |
- Class 3 Hitch; 2in.; Select Silverado; Sierra 1500; 2500 (Round Tube Frame)
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Fascia Trimming Required~Install Time 30 Minutes
- CURT 13322 Class 3 Trailer Hitch; 2-Inch Receiver; Round Tube Frame; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 6000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 and GMC Sierra 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - GMC Sierra 1500 | V | 5328 | Rear | 8 Cyl 5.3L | SLE | 325 |
- Class 4 Trailer Hitch; 2in. Receiver; Select Chevrolet Silverado; GMC Sierra 150
- 10000lbs. Gross Trailer Weight; 1000lbs. Tongue Weight; 12000lbs. Weight Distributing; 1200lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~For Models w/o Tommy Gate Lift~For Models w/o Roll Pan Bumper~For Models w/o 10 in. Drop Bumper~Install Time 30 Minutes
- CURT 14301 Class 4 Trailer Hitch; 2-Inch Receiver; Fits Select Chevrolet Silverado; GMC Sierra 1500
- Class IV 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 10000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 10000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1200
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 1000
- Weight Distribution: 12000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next item is on your to-do list -- whether its arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset -- CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado 1500, 1500 Classic or 1500 HD Classic and GMC Sierra 1500, 1500 Classic or 1500 HD Classic (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2 in. receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid Bonderite and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - GMC Sierra 1500 | V | 5328 | Rear | 8 Cyl 5.3L | SLE | 325 |
- 2in. Front Receiver Hitch; Select Chevrolet Silverado; GMC Sierra 1500
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Concealed~Install Time 30 Minutes~Air Dam Modification Required
- CURT 31322 2-Inch Front Receiver Hitch; Select Chevrolet Silverado; GMC Sierra 1500
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Chevy Silverado 1500 and GMC Sierra 1500 (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2008 - GMC Sierra 1500 | V | 5328 | Front | 8 Cyl 5.3L | SLE | 325 |
- Over-Bed Folding Ball Gooseneck Hitch
- Powder Coat Finish; Includes U-Bolt Kit; Mounting Hardware; 2 5/16 in. Ball; 30000lbs. Gross Trailer Weight; 6000lbs. Tongue Weight
- CURT 61052 Over-Bed Folding Ball Gooseneck Hitch; 30;000 lbs; 2-5/16-Inch Ball
- Folding Ball Gooseneck Hitch
- Product Attributes:
- Gross Trailer Weight: 30000 Lbs.
- WARNING CA Proposition 65: No
- WC Tongue Weight: 7500
- Ball Diameter: 2.3125 In.
- Vertical Load: 7500
-
Features:
- Accepts Up To 30000 Lbs. Tw And 7500 Lbs. Vertical Load Limit
- Folding Ball Design Keeps Truck Bed Free Of Obstructions
- Features A T-Handle For Easy Operation
- Stainless Steel Safety Pin And Pivot Spring Prevents Binding
- Permanently Attached Gooseneck Ball Cannot Be Loosened Or Stolen
- Chrome-Plated 2 5/16 In. Trailer Ball Fits All Standard Trailers
- Includes Spring-Loaded Safety Chain Loops And Grade 8 Hardware
- Protected By A Highly Durable Carbide Powder Coat Finish
- Backed By A Limited Lifetime Warranty
- The CURT folding ball gooseneck hitch is an innovation in gooseneck technology, offering a unique solution to the problem of a misplaced or stolen trailer ball. Rather than having a fixed trailer ball that obstructs your truck bed space or a removable ball that locks into place using a set of pins, a folding ball gooseneck hitch features a permanently attached ball that hinges down into a small compartment within the hitch. When folded down, the gooseneck ball remains out of the way and allows you to make full use of your truck bed. When folded back up again, it provides a reliable towing connection for your gooseneck trailer. No matter which position the ball is in, it remains fixed to your pickup truck, deterring theft and preventing loss. The CURT over-bed folding ball gooseneck hitch is just another example of CURT quality and ease of use. This durable hitch has a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. A 2-5/16 in. trailer ball, 3/8 in. thick top plate, six-hole mounting design and U-bolt safety chain hookups ensure that your trailer and payload stay securely attached. The folding mechanism of the over-bed folding ball gooseneck hitch features a stainless steel safety pin and pivot spring to prevent binding, and it comes with a T-handle to make operation of the ball quick and easy. To top things off, we finish each over-bed folding ball gooseneck hitch in a durable carbide powder coat to resist rust and give it a limited lifetime warranty for peace of mind
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - GMC Sierra 1500 | SLE |
- Dual-Output 6/4-Way Connector (Plugs into USCAR)
- 6-Way And 4-Way; Plugs Into USCAR For Models w/Factory Tow Package
- CURT 55664 Dual-Output Vehicle-Side 6-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 6 Pole Round And 4 Flat
- WARNING CA Proposition 65: Yes
- Connector Type: Vehicle Side
-
Features:
- Plugs Into Connector To Provide A 4-Way And 6-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 6-Way Round Socket Adds Connection For Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - GMC Sierra 1500 | SLE |
- Replacement OE 4-Way Flat Socket (Plugs into USCAR)
- Replacement; 2-Wire System; OE 4-Way Flat; Plugs Into Uscar For Models w/Factory Tow Package
- CURT 55515 Replacement Vehicle-Side 4-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - GMC Sierra 1500 | SLE |
- Dual-Output 7/4-Way Connector with Backup Alarm (Plugs into USCAR)
- w/Back Up Alarm; GM/Ford Plug For Models w/Factory Tow Package
- CURT 57101 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors with Backup Alarm; Factory Tow Package and USCAR Socket Required
- 7-Way Round RV To 4-Way Flat Adapter
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Round Uscar Socket On Ford Or Gm
- Replaces The Factory-Equipped 7-Way Socket
- Integrated Backup Alarm Sounds When Vehicle Is In Reverse
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Rave Blade Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- A CURT custom original equipment vehicle-to-trailer connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs OE vehicle-to-trailer connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom OE connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom vehicle-to-trailer wiring connector provides a multi-function connector socket. It is designed to plug into a circular 7-prong OEM socket and replace a factory-equipped 7-way connector with a 7-way RV blade and 4-way flat. It specifically offers a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle).This multipurpose socket comes with its own backup alarm, a mounting bracket and all necessary mounting hardware for a complete installation. CURT custom vehicle-to-trailer wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Sierra 1500 |
- Over-Bed Flat Plate Gooseneck Hitch
- Black Powder Coat Finish; 30000 Gross Trailer Weight; 13 in. X 46 in.; Includes 2 5/16 in. Ball; 0.5 in. D-Rings
- CURT 65500 Over-Bed Flat Plate Gooseneck Hitch; 30;000 lbs; 2-5/16-Inch Ball
- Gooseneck Hitch Flat Hitch Plate
- Product Attributes:
- Gross Trailer Weight: 30000 Lbs.
- WARNING CA Proposition 65: No
- Ball Diameter: 2.3125 In.
- Vertical Load: 7500
-
Features:
- Accepts Up To 30000 Lbs. Tw
- 2 5/16 In. Trailer Ball Fits All Standard Gooseneck Trailers
- Permanently Attached Gooseneck Ball Eliminates Theft And Loss
- Constructed From High-Strength Steel
- Protected By A Highly Durable Carbide Powder Coat Finish
- Plate Measures 13 In. X 48 In.
- Two Welded Forged D-Rings For Secure Safe Chain Attachment
- Assembled in USA
- CURT fixed ball gooseneck hitches are built to deliver all the towing power you need to tackle the demands of the job, without breaking the bank. When your day starts the moment you climb into the seat of that full-size 4x4 pickup, your towing equipment needs to be a reliable extension of your truck. CURT fixed ball gooseneck hitches are a permanent towing solution that offer reliable strength at an economical price. This CURT fixed ball hitch features an over-bed design, installing directly on top of your truck bed using CURT over-bed gooseneck installation brackets. It offers a gross trailer weight capacity up to 30,000 lbs. to allow you to tow whatever heavy-duty trailer you need, from point A to point B, whether a livestock trailer full of horses, a flatbed piled with building materials or a car hauler carrying a backhoe. This fixed ball gooseneck hitch also comes with a standard 2-5/16 in. gooseneck trailer ball welded onto a thick 13 in. x 48 in. steel plate and two 1/2 in. forged, welded D-rings to attach safety chains. The fixed design ensures the ball can never be loosened or stolen, increasing safety on the road and preventing theft. Also, to ensure that CURT fixed ball gooseneck hitches can indeed be called CURT hitches, we finish them in a durable carbide powder coat that provides the necessary protection against rust, wear and other everyday threats you meet off the beaten path. For the best quality and durability in gooseneck towing, CURT is the obvious choice. We carefully engineer, test and manufacture our gooseneck hitches to meet todays safety standards and exceed all expectations. For a gooseneck hitch with all the quality of a CURT hitch and the economy to keep your wallet full, there is nothing like a CURT fixed ball gooseneck hitch.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - GMC Sierra 1500 | SLE |
- Replacement OE 5-Way Flat Socket (Plugs into USCAR)
- 2-Wire System; 5-Way Flat For Models w/Factory Tow Package
- CURT 56515 Replacement Vehicle-Side 5-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 5-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 5-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 5-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - GMC Sierra 1500 |
Showing 1 - 10 of 36 products
Loading...