2011 Ford Expedition CURT Parts
Choose your Submodel for your 2011 Ford Expedition
Image
Product
Price
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire For Models w/Factory Tow Package
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Dual-Output 7/4-Way Connector with Backup Alarm (Plugs into USCAR)
- w/Back Up Alarm; GM/Ford Plug For Models w/Factory Tow Package
- CURT 57101 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors with Backup Alarm; Factory Tow Package and USCAR Socket Required
- 7-Way Round RV To 4-Way Flat Adapter
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Round Uscar Socket On Ford Or Gm
- Replaces The Factory-Equipped 7-Way Socket
- Integrated Backup Alarm Sounds When Vehicle Is In Reverse
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Rave Blade Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- A CURT custom original equipment vehicle-to-trailer connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs OE vehicle-to-trailer connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom OE connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom vehicle-to-trailer wiring connector provides a multi-function connector socket. It is designed to plug into a circular 7-prong OEM socket and replace a factory-equipped 7-way connector with a 7-way RV blade and 4-way flat. It specifically offers a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle).This multipurpose socket comes with its own backup alarm, a mounting bracket and all necessary mounting hardware for a complete installation. CURT custom vehicle-to-trailer wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks; SUVs
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug Install Time 5 Minutes
- CURT 51322 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- 2in. Front Receiver Hitch; Select Ford Expedition; F-150; Lincoln Navigator
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 31068 2-Inch Front Receiver Hitch; Select Ford Expedition; F-150; Lincoln Navigator
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford Expedition, Ford F150 and Lincoln Navigator (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2011 - Ford Expedition | V | - | Front | 8 Cyl 5.4L | Max XL | 330 |
- Custom Towed-Vehicle RV Wiring Harness; Select Ford Expedition
- Towed-Vehicle RV
- CURT 58988 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing; Fits Select Ford Expedition; Chevy Equinox (No LED Taillights)
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights/Brake Lights/Turn Signals
- Equipped w/Powered Tail Light Converter With A Potted Enclosure
- Impervious To All Weather/Completely Sealed Off From Moisture
- Converter Can Be Mounted On The Exterior Of The Vehicle
- Constructed w/Smt Circuitry For Better Performance/Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If you're towing your vehicle along for your next RV adventure, Bring It(R) with CURT! CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for vehicle-specific application, using OEM-compatible plugs to 'T' into the vehicle's wiring without any need for cutting or splicing. This particular RV dinghy tow wiring harness is designed for select years of the Ford Expedition (see application info to verify fitment). With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing tail lights, turn signals and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights are able to operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. The simple plug-and-play design of CURT towed-vehicle RV harnesses makes installation a breeze, but these custom harnesses are also built for lasting durability. Each harness features integrated block diodes. These diodes isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. Each CURT towed-vehicle RV harness comes with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle and all the necessary hardware for a complete installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Brake Controller Harness; Select Ford; Land Rover; Lincoln; Mercury (Packaged)
- Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug; Package Install Time 5 Minutes
- CURT 51323 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Ford; Land Rover; Lincoln; Mercury Trucks and SUVs
- Brake Control Adapter Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Replacement OE 4-Way Flat Socket (T s into USCAR)
- 2-Wire System; 4-Way Flat; Packaged; Retains Use of 7 Way Round Connector For Models w/Factory Tow Package
- CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Socket To Add A 4-Way Flat And Retain Use Of 7-Way
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM 7-way. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- 20 in.; USCAR To USCAR For Models w/Factory Tow Package
- CURT 56475 24in. USCAR Wiring Extension Harness
- Custom Wiring Harness Extension
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Adds Extra Length For Easier Installation Of Curt Echo In-line Brake Controller
- Connects OEM USCAR Socket To USCAR Connector [Not Included]
- Simple Plug-And-Play Design Eliminates The Need For Cutting Or Splicing
- Slit Loom Keeps Wires Contained And Well Protected
- This CURT USCAR extension harness is designed to help ease the installation process of the CURT Echo in-line brake controller, providing 20 in. of extra length for more flexible positioning of the brake control module. It connects USCAR to USCAR and comes with a slit loom sleeve to protect the wires.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Dual-Output 6/4-Way Connector (Plugs into USCAR)
- 6-Way And 4-Way; Plugs Into USCAR For Models w/Factory Tow Package
- CURT 55664 Dual-Output Vehicle-Side 6-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
- OEM Vehicle To Trailer Connector w/Harness
- Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 6 Pole Round And 4 Flat
- WARNING CA Proposition 65: Yes
- Connector Type: Vehicle Side
-
Features:
- Plugs Into Connector To Provide A 4-Way And 6-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 6-Way Round Socket Adds Connection For Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
- Replacement OE 5-Way Flat Socket (Plugs into USCAR)
- 2-Wire System; 5-Way Flat For Models w/Factory Tow Package
- CURT 56515 Replacement Vehicle-Side 5-Pin Connector; Factory Tow Package and USCAR Socket Required
- Custom Wiring Connector
- Product Attributes:
- Output Type: 5-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 5-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 5-Way Flat Connects Tail Lights Brake Lights Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 5-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Ford Expedition |
Showing 1 - 10 of 16 products
Loading...