Image
Product
Price
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 1 1/8 in.; 10 Spline; 925 ft/lbs Torque Cap.; Solid Full Face Organic Twin Disc/Floater/Pilot Brg./Bolts/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- Centerforce I Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning - Includes Nickel - Cancer. Www.p65warnings.ca.gov.
-
Features:
- 10.4 in. Diameter
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- SST 10.4; Clutch and Flywheel Kit
- 10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 925ft/lbs Trq.; 168 Teeth; Includes Cluth Disc/Flywheel/Bolts/Pilot Bearing/Alignment Tool
- The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
- SST Clutch And Flywheel Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Simple Install
- Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Flywheels; Steel
- 168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
- Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
- Billet Steel Flywheel
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
- Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) II; Clutch Kit
- 12 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 608 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throw Out Bearing/Alignment Tool
- Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
- Centerforce® II Clutch Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Accessories; Clutch Pilot Bearing
- 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
- Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Pilot Bearing
- Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
-
Features:
- Pilot Bearing
- Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
- Dual Friction(R); Clutch Kit
- 12 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 694 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Align Tool
- The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
- Dual Friction® Clutch Pressure Plate And Disc Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - GMC 3500 | V | 4638 | 8 Cyl 4.6L | 283 |
Showing 1 - 7 of 7 products
Loading...