Image
Product
Price
- Engine Turbocharger
- Product Attributes:
- Accionador de descarga incluido: S?¡
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Turbocharger
- Maximum Pressure Reading: 125
- Contenidos del paquete: 1 Turbocargador
- Item Grade:
- Reemplazo Est?índar
- Standard Replacement
- Center Housing Cooling Type:
- Oil Only
- Solo Aceite
- Wastegate Actuator Included:
- Oui
- Yes
- Bearing Type:
- Journal
- Mu????n
- Mounting Bracket Included:
- No
- Non
-
Features:
- Direct replacement - this turbocharger is built to match the performance of original equipment for specific vehicles
- Complete kit - comes with turbocharger and gasket kit for added convenience
- Thoroughly tested - part has undergone fit, performance and corrosion testing to ensure longevity and reliability
- Repair tip - also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function
- Turbocharger seals or bearings gone bad? This replacement turbocharger is designed to replace the original equipment on specific vehicle years, makes and models to reliably restore engine performance.
This Part Fits the Following OEM/Substitute Numbers:
014TC24024000, 2511513, 2T228, A1150128N, A1150229N, AA5Z6K682A, AA5Z6K682C, AA5Z6K682CA, AA5Z6K682E, G1017, LU2Z6K682A, N115229C
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2013 - Ford Taurus | V | 3496 | Right | 6 Cyl 3.5L | Turbocharged | 213 |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Stamped
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Control Arm
- Bushing Color:
- Black
- Negro
- Noir
- Bushing Inside Diameter: 14.3
- Length: 262.5
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Estampado
- End 2 Type:
- Presionar Hacia Adentro
- Press In
- Adjustable:
- No
- Non
- Contenidos del paquete: 1 Brazo De Suspensi??n
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Articulaci├│n de r├│tula instalada: No
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
2607472, 5CB40177, 622.61888, 810-690356, 8A8Z5A649A, 8A8Z5A649B, 8A8Z5A649C, CA85875, CA85875PR, CMS40187, GS40187, MS40187, RK643093, TC7428, WC1-12797
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Left Lower Rearward |
- Suspension Lateral Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- S?¡
- Yes
- Grade Type: Regular
- Package Contents:
- 1 Lateral Link
- 2 Nuts
- Contenidos del paquete:
- 1 Varilla Lateral
- 2tuercas
- Ball Joint Included:
-
Features:
- Smart fix - this lateral link is designed to reduce the possibility of a weld fracture that can affect steering control, and to improve suspension load distribution on select Ford and Lincoln vehicles
- Sturdy design - features 18mm diameter threaded shafts on solid 1-piece castings, rather than the 14mm diameter, welded 2-piece design of the factory link
- Rigorously tested - has undergone material and fine element analysis to ensure durability
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- The factory rear suspension control arm toe compensator link on certain Ford Flex, Ford Taurus, Lincoln MKS and Lincoln MKT vehicles can fail when the welds on the link's threaded shaft ends fracture. A fracture of this rear lateral link significantly diminishes steering control, increasing the risk of a crash. This Dorman OE FIX rear lateral link has been designed as an alternative to the factory design, and as a potentially more permanent suspension repair that could reduce long-term repair costs and offer more predictable vehicle handling. This lateral link includes features intended to address potential failure points in the original equipment design. Our design reduces the possibility of lateral link fracture and failure by replacing the original link's welded threaded shaft ends with ends that are solid, one-piece steel castings. To further increase resistance to fractures and help improve suspension load distribution, both of the threaded, cast shaft ends are 18mm in diameter instead of the 14mm diameter shaft ends on the factory design.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2608480, 2608480M, 2CB40582, 800-704547B, 8A5Z5A972A, 8A5Z5A972B, BA5Z5A972A, BA8Z5A972A, CMS401225, CMS401242, DE9Z5A972B, DE9Z5A972C, DE9Z5A972K, DG1Z5A972A, DG1Z5A972B, DG1Z5A972J, GS401225, GS401242...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Upper |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Stamped
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Control Arm
- Bushing Color:
- Black
- Negro
- Noir
- Bushing Inside Diameter: 14.3
- Length: 262.5
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Estampado
- End 2 Type:
- Presionar Hacia Adentro
- Press In
- Adjustable:
- No
- Non
- Contenidos del paquete: 1 Brazo De Suspensi??n
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Articulaci├│n de r├│tula instalada: No
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Right Lower Rearward |
- Chrysler, GM Panel Retainer
- Rear Wheelhouse Package Quantity: 5 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.68
- Package Contents: 5 Retainers
- Outside Diameter: 0.7
- Overall Length: 0.62 In
- Contenidos del paquete: 5 Retenedores
- Shaft Diameter: 0.18
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
14093311, 20732399, 332364, 3691590, 389258, 389358, 389358S, 4004569, 454900, 454900B, 464150B, 479740B, 6031321, 6505411AA, J4004569, W701259S300
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford Taurus |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Brake Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Overall Length: 16.06 In
- Hose Material:
- ?ëlastom?¿re Epdm
- Caucho De Etileno Propileno Dieno
- Epdm Rubber
- Jacket Included:
- Oui
- S?¡
- Yes
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Outer Sleeve Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- S?¡
- Yes
- Describe Type: Flexible Hose
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
This Part Fits the Following OEM/Substitute Numbers:
150.61441, 150.61447, 2201838, 350-54213, 613069, 8A8Z2A442A, 8A8Z2A442B, AA5Z2A442A, BH144998, BH382852, F144998
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Left |
- Brake Hydraulic Hose
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Brake Hose
- End 2 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Overall Length: 16.06 In
- Hose Material:
- ?ëlastom?¿re Epdm
- Caucho De Etileno Propileno Dieno
- Epdm Rubber
- Jacket Included:
- Oui
- S?¡
- Yes
- Bracket Included:
- No
- Non
- Describir el tipo: Manguera Flexible
- Gasket Or Seal Included:
- No
- Non
- End 1 Fitting Type:
- Macho
- Male
- End 2 Fitting Inside Diameter:
- M10 X 1,0
- M10 X 1.0
- End 2 Fitting Type:
- Female
- Hembra
- End 1 Fitting Material:
- Acero Tratado
- Acier Trait??
- Treated Steel
- Outer Sleeve Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Contenidos del paquete: 1 Manguera Del Freno
- DOT Approved:
- Oui
- S?¡
- Yes
- Describe Type: Flexible Hose
- Diámetro interior de la acoplación de extremo 2: M10 X 1.0
- End 1 Thread Size: 10 Mm
- Mounting Hardware Included:
-
Features:
- Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific - manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured - materials tested to exacting government-regulated safety and durability standards
- Durable design - made with EPDM rubber and specially coated, corrosion-resistant fittings
- This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Right |
- TPMS Aluminum Clamp-In Valve Stem For Dorman DiRECT-FIT Sensor
- Fits only Dorman DIRECT-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Package Contents: Replacement Tpms Clamp-in Valve Stem For Dorman Sensors
- Contenidos del paquete: Reemplazo Del V?ístago De La V?ílvula De Sujeci??n Tpms De Los Sensores Dorman
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Ford Taurus |
- Boost Solenoid With Vacuum Harness
- Product Attributes:
- Connector Gender:
- Macho
- Male
- Wire Gauge Measurement: 4.6
- Package Contents: 1 Vacuum Harness
- Length: 23
- Item Grade: Regular
- Connector Shape:
- Cuadrado
- Square
- Terminal Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Housing Color:
- Black
- Negro
- Noir
- Connector Color:
- Black
- Negro
- Noir
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Arn??s Al Vac?¡o
- Wire Quantity: 3
- Connector Gender:
-
Features:
- Direct replacement - this vacuum harness is designed to match the fit and function of the original harness on specified vehicles
- Restores functionality - reliable replacement for an original harness that has failed due to heat and fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This vacuum harness is designed to match the fit and function of the original harness on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
CJ5Z9961B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Taurus | L | 1999 | 4 Cyl 2.0L | 122 |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Control Arm
- Bushing Color:
- Black
- Negro
- Noir
- Bushing Inside Diameter: 14.3
- Length: 262.5
- Bushing Length: 55
- Bushing Outside Diameter: 63.1 Mm
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundici??n/forjado
- End 2 Type:
- Presionar Hacia Adentro
- Press In
- Adjustable:
- No
- Non
- Contenidos del paquete: 1 Brazo De Suspensi??n
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Articulaci├│n de r├│tula instalada: No
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
2608370, 4CB40549, 622.61885, 8A8Z5500B, BB5Z5A638A, CB5Z5500A, CB5Z5A638A, CMS401203, DE9Z5500A, GS401203, JTC2163, RK643338, TC6120, W715179S439, X15CA0305
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Ford Taurus | Rear Right Upper |
Showing 1 - 10 of 124 products
Loading...