Image
Product
Price
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- S?¡
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Est?índar
- Standard
- Mounting Hardware Included:
- Oui
- S?¡
- Yes
- Package Contents: Lateral Link
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundici??n/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- S?¡
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conexi??n Lateral
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Articulaci├│n de r├│tula instalada: S?¡
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
102-7515, 1526012, 1CB10213, 2606374, 2607738, 2607742, 6CB70110, 8K0407510A, 8K0407510B, 8K0407510J, 8K0407510M, 8K0407510N, 8K0407510R, CA1475B, CB10213, CB12058, CB12078, CB12098...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Audi A4 | Front Right Upper Rearward |
- Dual Fan Assembly Without Controller
- Product Attributes:
- Shroud Material:
- Pl?ístico
- Plastic
- Connector Gender:
- Macho
- Male
- Package Contents: 1 Radiator Fan Assembly
- Connector Quantity: 2
- Fan Quantity: 2
- Motor Type:
- Brushed
- Cepillado
- Contenidos del paquete: 1 Conjunto De Ventilador Del Radiador
- Terminal Quantity: 2
- Shroud Color:
- Black
- Negro
- Noir
- Shroud Included:
- Oui
- S?¡
- Yes
- Shroud Material:
-
Features:
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
2811880, 622940, 76301, 8K0121207A, 8K0959455F, 8K0959455G, 8K0959455K, 8K0959455M, 8K0959455R, 8K0959455T, CF11035, FA70926
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 2014 - Audi A4 | L | 1798 | CJEB | Mexico | 4 Cyl 1.8L | 110 |
- Turbocharger Recirculation Valve
- Stamped 06H145710D or 06H145710C
- Product Attributes:
- Port Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Grade Type: Regular
- Package Contents: 1 Turbocharger Diverter Valve
- Mounting Hole Diameter: 0.25
- Length: 3
- Contenidos del paquete: 1 V?ílvula De Desviaci??n Del Turbocargador
- Mounting Hole Quantity: 3
- Port Quantity:
-
Features:
- Direct replacement - this turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality - reliable replacement for an original valve that has failed due to a cracked diaphragm
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This turbocharger diverter valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
06F145710B, 06F145710C, 06F145710G, 06F201282, 06F201282B, 06H145710C, 06H145710D, 7D1160, DV183, DV185, EC6064, G62001, SK911240, TBV1013
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2014 - Audi A4 | L | 1984 | 4 Cyl 2.0L | Turbocharged | 121 |
- Wheel Bearing Assembly - Front, Rear
- Repair Kit
- Product Attributes:
- Snap Rings Included:
- No
- Non
- Package Contents: 1 Wheel Bearing
- Bearing Shape:
- Cil?¡ndrico
- Cylindrical
- Bolt Circle Diameter: 126 Mm
- Width: 40.5
- Brida de rueda incluida: No
- Spline Quantity: 0
- Hub Included:
- No
- Non
- Inside Diameter: 62
- Anti Lock Braking System:
- No
- Non
- Bearing Generation: Gen 2
- Drive Type:
- Driven
- Impulsado
- Flange Bolts Included:
- No
- Non
- Outside Diameter: 102
- Wheel Flange Included:
- No
- Non
- Anillo de retenci├│n incluido: No
- Wheel Studs Included:
- No
- Non
- Bearing Material:
- Acero
- Steel
- Contenidos del paquete: 1 Rodamiento De Rueda
- Bearing Type:
- Ball
- R??tula
- Snap Rings Included:
-
Features:
- Direct replacement - this wheel bearing is designed to match the fit and function of the original part on specified vehicles
- Restores functionality - this bearing is made to fit and fully restore part functionality after the original bearing fails
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This wheel bearing is designed to match the fit and function of the original part on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
4H0498625F, 512574, 513301, BR930817, H513301, WA512574, WE60683
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Audi A4 | Front |
- Camshaft Bridge Cover
- Product Attributes:
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Engine Camshaft Bridge
- Mounting Hole Diameter: 7.5
- Diámetro del orificio del árbol de levas de admisión y escape: 24mm
- Intake & Exhaust Camshaft Bore Diameter: 24 Mm
- Length: 5
- Contenidos del paquete: 1 Puente Del ?írbol De Levas Del Motor
- Width: 6
- Mounting Hole Quantity: M6 -1.0
- Depth: 2
- Gasket Or Seal Included:
-
Features:
- Better fix - this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants
- Upgraded materials - the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory's multi-piece plastic design
- Fully tested - in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
- Ensures performance - engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures
- On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design's plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter - small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations.
This Part Fits the Following OEM/Substitute Numbers:
06H103144F, 06H103144G, 06H103144H, 06H103144J, 06H103144K
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Audi A4 | L | 1984 | CDNC | 4 Cyl 2.0L | 121 |
- Timing Cover Kit
- Product Attributes:
- Gasket Or Seal Included:
- Oui
- S?¡
- Yes
- Grade Type: Regular
- Mounting Hardware Included:
- Oui
- S?¡
- Yes
- Package Contents:
- 1 Engine Timing Cover
- Gaskets
- Mounting Hardware
- Mounting Hole Diameter: 0.125
- Length: 8.5
- Material Thickness: 0.15
- Contenidos del paquete:
- 1 Cubierta Del Tiempo Del Motor
- Herrajes De Montaje
- Juntas
- Mounting Hole Quantity: M6 -1.0
- Depth: 2
- Gasket Or Seal Included:
-
Features:
- Direct replacement - this engine timing cover matches the fit and function of the original equipment cover
- Durable construction - this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
This Part Fits the Following OEM/Substitute Numbers:
06K103269D, 06K103269F, 06L103269E, TCV0137, V103937
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Audi A4 | L | 1984 | Upper | 4 Cyl 2.0L | 121 |
- Power Window Regulator (Regulator Only)
- Power
- Product Attributes:
- Mounting Position:
- Front Left
- Parte Izquierda Delantera
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Power Window Regulator
- Installation Instructions Included:
- Oui
- S?¡
- Yes
- Belt Included:
- No
- Non
- Gear Material:
- Pl?ístico
- Plastic
- Attachment Type:
- Bolt On
- Con Perno
- Contenidos del paquete: 1 Elevador De Ventana El??ctrico
- Motor Included:
- No
- Non
- Regulator Included:
- Oui
- S?¡
- Yes
- Cable Material:
- Acero
- Pl?ístico
- Plastic
- Steel
- Window Operation Type:
- El??ctrico
- Electric
- Wire Quantity: 0
- Mounting Position:
-
Features:
- Trustworthy replacement - engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design - engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
This Part Fits the Following OEM/Substitute Numbers:
8K0837461, 8K0837461A, 8K0837461C, 8K0837461D, 8K0837461E, WLR2134
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Audi A4 | Front Left |
- Power Window Regulator (Regulator Only)
- Power
- Product Attributes:
- Mounting Position:
- Front Right
- Parte Derecha Delantera
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Power Window Regulator
- Installation Instructions Included:
- Oui
- S?¡
- Yes
- Belt Included:
- No
- Non
- Gear Material:
- Pl?ístico
- Plastic
- Attachment Type:
- Bolt On
- Con Perno
- Contenidos del paquete: 1 Elevador De Ventana El??ctrico
- Motor Included:
- No
- Non
- Regulator Included:
- Oui
- S?¡
- Yes
- Cable Material:
- Acero
- Pl?ístico
- Plastic
- Steel
- Window Operation Type:
- El??ctrico
- Electric
- Wire Quantity: 0
- Mounting Position:
-
Features:
- Trustworthy replacement - engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design - engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
This Part Fits the Following OEM/Substitute Numbers:
8K0837462A, 8K0837462D, 8K0837462E, WLR2210
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Audi A4 | Front Right |
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Audi A4 |
- Lower Intermediate Steering Shaft
- Product Attributes:
- Universal Joint Quantity: 2
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Steering Shaft
- Length: 505
- Tipo de extremo 1: Perfil Interno
- End 1 Type: Internal Profile
- Installation Instructions Included:
- No
- Non
- Spline Quantity: 0
- Diameter: 26
- End 2 Type:
- Internal Profile
- Perfil Interno
- Contenidos del paquete: 1 Eje De Direcci??n
- Universal Joints Included:
- Oui
- S?¡
- Yes
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
8K1419753A, 8K1419753B, 8K1419753C, 8K1419753E, 8K1419753F, 8K1419753G, 8K1419753H
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Audi A4 | Lower Intermediate |
Showing 1 - 10 of 24 products
Loading...