2018 Nissan Maxima Dorman Parts
Image
Product
Price
- Engine Valve Cover
- Product Attributes:
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- No
- Non
- Grommets Included:
- Oui
- Sí
- Yes
- Oil Filler Cap Included:
- No
- Non
- Hold Down Tabs Included:
- Oui
- Sí
- Yes
- Valve Cover Gasket Included:
- Oui
- Sí
- Yes
- Finish:
- Sin Recubrimiento
- Uncoated
- Mounting Location:
- Center
- Centro
- Contains Oil Baffles:
- Oui
- Sí
- Yes
- Color:
- Black
- Negro
- Noir
- Surface Type:
- Smooth
- Suave
- Construction:
- Fabricado
- Fabricated
- Cylinder Head Type: Dohc
- Material Thickness: 0.355
- Breather Cap Included:
- No
- Non
- Contenidos del paquete: 1 Cubierta De La Válvula Del Motor
- Inside Clearance Height: 1.814
- Sheen Level:
- Flat
- Plano
- Material:
- Plastic
- Plástico
- Valve Cover Type:
- Corto
- Short
- Grade Type:
-
Features:
- Direct replacement - this valve cover matches the original equipment part for fit and function
- Durable construction - this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service
- This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
This Part Fits the Following OEM/Substitute Numbers:
132649N00A, SK510A13, VC-J50005R, VC-J50007
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Nissan Maxima | V | 3498 | Rear | 6 Cyl 3.5L | - |
- Engine Valve Cover
- Product Attributes:
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- No
- Non
- Grommets Included:
- No
- Non
- Oil Filler Cap Included:
- No
- Non
- Hold Down Tabs Included:
- Oui
- Sí
- Yes
- Valve Cover Gasket Included:
- Oui
- Sí
- Yes
- Finish:
- Sin Recubrimiento
- Uncoated
- Mounting Location:
- Center
- Centro
- Contains Oil Baffles:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Surface Type:
- Smooth
- Suave
- Construction:
- Fabricado
- Fabricated
- Cylinder Head Type: Dohc
- Material Thickness: 9.46
- Breather Cap Included:
- No
- Non
- Contenidos del paquete: 1 Cubierta De La Válvula
- Inside Clearance Height: 0.5
- Sheen Level:
- Flat
- Plano
- Material:
- Plastic
- Plástico
- Valve Cover Type:
- Corto
- Short
- Grade Type:
-
Features:
- Direct replacement - this valve cover matches the original equipment part for fit and function
- Durable construction - this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service
- This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
This Part Fits the Following OEM/Substitute Numbers:
132649N00B, SK510A14, VC-J50005L
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Nissan Maxima | V | 3498 | Front | 6 Cyl 3.5L | - |
- Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool
- Product Attributes:
- Attachment Type:
- Clamp-in
- Con Grampa
- Valve Length: 2.21
- Frequency:
- 315 Mhz
- 315 Mhz Y 433 Mhz
- 433 Mhz
- Contenidos del paquete: 1 Sensor Del Monitor De Presión Para Neumáticos
- Valve Color:
- Plateado
- Silver
- Power Source:
- Batería
- Battery
- Attachment Type:
-
Features:
- Versatile replacement - this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
- Programming required - easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it's replacing
- Direct replacement - this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires
- check fit before installing
- Premium quality - communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust
- This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors' TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it's replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it's backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0008223406, 0009057200, 0025400217, 0025407917, 0025408017, 0025409517, 0035400217, 06421S3VA00, 06421S3VA04, 06421S9VA00, 06421S9VA01, 06421S9VA02, 06421S9VA03, 06421SCV305, 06421SCVA00, 10394110, 10438853...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Nissan Maxima |
- Dorman MULTi-FIT (433) Programmable Tire Pressure Monitoring System Sensor
- Sensor Only; 433 MHz Requires MULTi-FIT Programming Tool Sell Until Depleted
- Product Attributes:
- Frequency:
- 433 Mhz
- 433mhz
- Contenidos del paquete:
- 1 Sensor Del Sistema De Monitoreo De Presión De La Llanta Programable
- 1 Tornillo De Montaje
- 1 Válvula De Sujeción Completa
- Frequency:
-
Features:
- Versatile replacement - this programmable TPMS sensor can replace the factory sensor on vehicles with tire pressure monitoring systems that operate on 433 MHz frequency
- Programming required - this sensor must be cloned to match the original sensor or calibrated to vehicle specification using the MULTi-FIT II programming tool (sold separately
- part number 974-505)
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This programmable 433 MHz TPMS sensor matches the function of the original sensor on a variety of specified vehicles. Using the Dorman MULTi-FIT II programming tool, it can be calibrated by vehicle specification or can be cloned to match the sensor it's replacing. Each one is made of quality materials and engineered for durability. (MULTi-FIT II tool sold separately; part number 974-505)
This Part Fits the Following OEM/Substitute Numbers:
0008223306, 0009057200, 0025400217, 0025408017, 0025409517, 0035400217, 13172567, 13227143, 24437708, 31280296, 31280297, 31302096, 31341893, 31445474, 36106790054, 36106856227, 36106874829, 36118378682...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Nissan Maxima |
- Wheel Nut M12-1.25 Dometop - 21mm Hex, 38.6mm Length
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M12-1.25 Overall Length: 1.52 in Color: Gray Wheel Nut Style: Dometop Capped Nut
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 21 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Material:
- Acero
- Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
402244HH0A, 40224JK00A
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Nissan Maxima |
- Fuel Door Actuator
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Lubricado automático: No
- Mounting Hardware Included:
- No
- Non
- Connector Shape: Rectangular
- Terminal Quantity: 2
- Wiring Harness Included:
- No
- Non
- Activation Type:
- Electric
- Eléctrico
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Motor Del Actuador Del Seguro De La Puerta
- Self Lubricating:
- No
- Non
- Terminal Gender:
- Macho
- Male
- Material:
- Plastic
- Plástico
- Connector Gender:
-
Features:
- Direct replacement - this fuel filler door lock actuator is made to match the fit and performance of the original part on specific vehicle applications
- Ideal solution - this actuator is a reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This fuel filler door lock actuator is designed to match the appearance and function of the original part on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
788501LA0A, 788501LA0E, 788501LA1A, 788506JE0A, 78850CA000, 78850CA00A, 78850CA00B, 78850CA060, APDLA0171
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Nissan Maxima |
- TPMS Aluminum Clamp-In Valve Stem For Dorman MULTi-FIT Sensor
- Fits only Dorman Programmable Universal MULTI-FIT TPMS Sensors Replacement Clamp-In Valve Kit
- Product Attributes:
- Contenidos del paquete: Juego De Válvulas De Sujeción Para Grampar De Repuesto Para Sensor Dorman Multi-fit
- Material:
- Aluminio Anodizado
- Anodized Aluminum
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Nissan Maxima |
- M12-1.25 Serrated Wheel Stud - 14.35mm Knurl, 42mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.25 Thread Length (In): 28.71 mm
- Product Attributes:
- Shoulder Length (In): 12.96 Mm
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In): 14.48 Mm
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Shoulder Diameter: 12.07
- Bolt Grade: 10.9
- Thread Length (In): 28.71 Mm
- Estilo: Espárrago Dentado
- Head Diameter:
- 18,92 Mm
- 18.92 Mm
- Longitud del reborde (in): 12,96 Mm
- Nariz de inicio rápido: No
- Under Head Length: 41.66 Mm
- Color:
- Plateado
- Silver
- Longitud de la rosca (in): 28,71mm
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 14,48 Mm
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
This Part Fits the Following OEM/Substitute Numbers:
27838B, 4322221B00, 4322221B60, 4322225B60, 4322228B10, 4322241B00, 4322241B0A, 432225V200, 4322270T00, 4322270T0A, 43222KB50A, 561-378, 61681, 97293, BD61468, RB27838B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Maxima | Rear |
- M12-1.25 Serrated Wheel Stud - 14.35mm Knurl, 42mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.25 Thread Length (In): 28.71 mm
- Product Attributes:
- Shoulder Length (In): 12.96 Mm
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In): 14.48 Mm
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Shoulder Diameter: 12.07
- Bolt Grade: 10.9
- Thread Length (In): 28.71 Mm
- Estilo: Espárrago Dentado
- Head Diameter:
- 18,92 Mm
- 18.92 Mm
- Longitud del reborde (in): 12,96 Mm
- Nariz de inicio rápido: No
- Under Head Length: 41.66 Mm
- Color:
- Plateado
- Silver
- Longitud de la rosca (in): 28,71mm
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 14,48 Mm
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Maxima | Front |
- Dual Fan Assembly Without Controller
- Product Attributes:
- Shroud Material:
- Plastic
- Plástico
- Connector Gender:
- Macho
- Male
- Connector Quantity: 2
- Fan Quantity: 2
- Motor Type:
- Brushed
- Cepillado
- Contenidos del paquete: 1 Conjunto De Ventilador Del Radiador
- Terminal Quantity: 4
- Blade Material:
- Plastic
- Plástico
- Shroud Color:
- Black
- Negro
- Noir
- Shroud Included:
- Oui
- Sí
- Yes
- Shroud Material:
-
Features:
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
This Part Fits the Following OEM/Substitute Numbers:
214813NT0A, 214813NT0B, 214813TB0A, 214813TB0B, 21481JA000, 21481JA100, 21481ZX51A, 621660, 76100, CF23023, FA70435
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Nissan Maxima | V | 3498 | 6 Cyl 3.5L | - |
Showing 1 - 10 of 74 products
Loading...