2024 Nissan Z Dorman Parts
Image
Product
Price
- Engine Oil Pan
- Product Attributes:
- Engine Oil Cooler Return Fitting:
- No
- Non
- Sump Location:
- Avant
- Delantero
- Front
- Baffled:
- Oui
- Sí
- Yes
- Oil Level Sensor Port:
- No
- Non
- Finish:
- Sin Recubrimiento
- Uncoated
- Windage Tray Included:
- No
- Non
- Dipstick Port:
- No
- Non
- Sump Type:
- Húmedo
- Wet
- Color:
- Plateado
- Silver
- Drain Plug Included:
- No
- Non
- Material:
- Aluminio
- Aluminum
- Capacity: 6.5
- Maximum Depth: 5
- Pump Type:
- Electric
- Eléctrico
- Drain Thread Size: M12 X 1.25mm
- Installation Hardware Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Minimum Depth:
- 1
- 1 In
- Maximum Width: 7.5
- Contenidos del paquete: 1 Bandeja De Aceite Del Motor
- Crank Shaft Wiper Included:
- No
- Non
- Kick Out Type Pan:
- No
- Non
- Strap Included:
- No
- Non
- Pickup Included:
- No
- Non
- Engine Oil Cooler Return Fitting:
-
Features:
- Improved design - this engine oil pan is manufactured from durable aluminum rather than the factory design's plastic that can leak and fail from cracking caused by heat or impact damage
- Protects engine - features a metal magnetic drain plug that securely fits into threads precision-machined into the pan to protect the engine from debris in the oil caused by internal component wear
- Direct replacement - designed to match the fit and function of the original equipment engine oil pan on specified Nissan Q50 and Q60 sedans with 3.0L engines
- Simpler service - a relocated drain plug, with the bottom of the plug level with the bottom of the pan, helps enable a more complete drain
- When the original equipment plastic engine oil pan on certain Nissan Q50 and Q60 sedans and coupes cracks from heat or impact, the dealer repair solution is to offer the same failure-prone design, inviting similar future failures. This Dorman OE FIX oil pan is designed to precisely match the fit of the factory pan, but is made from rugged aluminum for a more permanent and damage-resistant repair. Our engineers also relocated the drain plug to allow a more complete drain by making the bottom of the plug level with the bottom of the pan. To help protect the engine from harmful metal debris in the oil that results from internal component wear, this pan also features a convenient magnetic drain plug. This all-metal plug is designed for rock-solid fit into threads precision-machined directly into the pan, eliminating the potential for the leaks that occur when the overmolded plastic-over-brass factory bung loosens and fails.
This Part Fits the Following OEM/Substitute Numbers:
111105CA1A, 111105CA2A, NSP48A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2024 - Nissan Z | V | 2997 | Lower | 6 Cyl 3.0L | - |
- Suspension Lateral Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Bushing Color:
- Black
- Negro
- Noir
- End 1 Type:
- Bracket
- Soporte
- Articulación de rótula instalada: No
- Bushings Included:
- Oui
- Sí
- Yes
- Greaseable:
- No
- Non
- Attachment Type:
- Presionar Hacia Adentro
- Press In
- Tipo de brazo de control: En Caja
- End 2 Type:
- Buje
- Bushing
- Adjustable:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Engrasado previamente: No
- Material:
- Acero
- Steel
- Ball Joint Installed:
- No
- Non
- Control Arm Type: Boxed
- Mounting Hole Diameter:
- 12.1
- 12.4
- Pre Greased:
- No
- Non
- Mounting Hole Quantity: 2
- Grease Fitting Included:
- No
- Non
- Shape:
- Recto
- Straight
- Mount Stud Quantity: 0
- Contenidos del paquete: 1 Brazo Lateral
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2607325, 2CB30412, 551A0JK000, 551A0JL00A, CMS301140, GS301140, RK100090, TC6732
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Nissan Z | Rear Lower Forward |
- Wheel Nut M12-1.25 Dometop - 21mm Hex, 38.6mm Length
- Verify lug nut to wheel mating surface for proper and safe fitment OE Replacement Or Custom Performance: OE Replacement Thread Direction: Clockwise (Right) Package Quantity: 10 Packaging Type: Box Thread Type: Fine Steel Thread Size: M12-1.25 Overall Length: 1.52 in Color: Gray Wheel Nut Style: Dometop Capped Nut
- Product Attributes:
- Estilo del asiento: Base Cónica: 60°
- SAE or Metric:
- Metric
- Métrico
- Grade Type: Regular
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Washers Included:
- No
- Non
- Thread Type:
- Fine
- Fino
- OE Replacement Or Custom Performance:
- Oe Replacement
- Reemplazo De Oe
- Wheel Lock Key Included:
- No
- Non
- Wheel Nut Style: Dometop Capped Nut
- Hex Size: 21 Mm
- Diseño de extremo abierto: No
- Color:
- Gray
- Gris
- Estilo de la tuerca de la rueda: Tuerca Reforzada De La Parte Superior Del Domo
- Contenidos del paquete: 10 Tuercas De La Rueda
- Seat Style: Conical Seat - 60 Deg
- Open End Design:
- No
- Non
- Material:
- Acero
- Steel
-
Features:
- Improved design - direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
- Corrosion resistant - by removing the veneer of the OEM lug nut design there's no chance of moisture and rust causing it to bulge and deform
- Thoroughly tested - part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.
This Part Fits the Following OEM/Substitute Numbers:
402244HH0A, 40224JK00A
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Nissan Z |
- M12-1.25 Serrated Wheel Stud - 14.35mm Knurl, 42mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.25 Thread Length (In): 28.71 mm
- Product Attributes:
- Shoulder Length (In): 12.96 Mm
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In): 14.48 Mm
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Shoulder Diameter: 12.07
- Bolt Grade: 10.9
- Thread Length (In): 28.71 Mm
- Estilo: Espárrago Dentado
- Head Diameter:
- 18,92 Mm
- 18.92 Mm
- Longitud del reborde (in): 12,96 Mm
- Nariz de inicio rápido: No
- Under Head Length: 41.66 Mm
- Color:
- Plateado
- Silver
- Longitud de la rosca (in): 28,71mm
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 14,48 Mm
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Nissan Z | Front |
- M12-1.25 Serrated Wheel Stud - 14.35mm Knurl, 42mm Length
- Package Quantity: 10 Packaging Type: Box Thread Size: M12-1.25 Thread Length (In): 28.71 mm
- Product Attributes:
- Shoulder Length (In): 12.96 Mm
- SAE or Metric:
- Metric
- Métrico
- Knurl Diameter (In): 14.48 Mm
- Quick-Start Nose:
- No
- Non
- Thread Direction:
- Clockwise (right)
- Rotar En El Sentido De Las Agujas Del Reloj (derecha)
- Thread Pitch: 1.25
- Shoulder Diameter: 12.07
- Bolt Grade: 10.9
- Thread Length (In): 28.71 Mm
- Estilo: Espárrago Dentado
- Head Diameter:
- 18,92 Mm
- 18.92 Mm
- Longitud del reborde (in): 12,96 Mm
- Nariz de inicio rápido: No
- Under Head Length: 41.66 Mm
- Color:
- Plateado
- Silver
- Longitud de la rosca (in): 28,71mm
- Contenidos del paquete: 10 Espárragos
- Diámetro del nudo (in): 14,48 Mm
- Material:
- Acero
- Steel
-
Features:
- Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant - extensive salt spray testing helps ensure years of durability against rust
- Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
This Part Fits the Following OEM/Substitute Numbers:
27838B, 4322221B00, 4322221B60, 4322225B60, 4322228B10, 4322241B00, 4322241B0A, 432225V200, 4322270T00, 4322270T0A, 43222KB50A, 561-378, 61681, 97293, BD61468, RB27838B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2024 - Nissan Z | Rear |
- Radiator Mount Bushing
- Package Quantity: 2
- Product Attributes:
- Contenidos del paquete: 2 Bujes De Montaje Del Radiadores
- Material:
- Caucho
- Élastomère
- Rubber
-
Features:
- Direct replacement - this radiator mount bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This radiator mount bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
2150610V00, 215069BL0A
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Nissan Z |
Showing 1 - 6 of 6 products
Loading...