1972 Ford Mustang Flowmaster Parts
Choose your Engine for your 1972 Ford Mustang
Image
Product
Price
- 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required Use Offset Inlet/Center Outlet Mufflers Only~Does Not Fit w/Staggered Shocks
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips. Does not fit cars with staggered shocks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Mustang | L | 4098 | 6 Cyl 4.1L | 250 |
- 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips. Does not fit cars with staggered shocks.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1972 - Ford Mustang | V | 5753 | 8 Cyl 5.8L | Cleveland | 351 |
- 40 Series™ Delta Flow Muffler
- 2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Delta Flow Muffler; 2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.000 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series Delta Flow
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Inlet Position: Offset
- Inlet Outside Diameter: 2.000 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- This two chamber design incorporates Flowmaster's Delta Flow(R) technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- 2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Delta Flow Muffler; 2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.000 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series Delta Flow
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Inlet Position: Offset
- Inlet Outside Diameter: 2.000 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- This two chamber design incorporates Flowmaster's Delta Flow(R) technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11224
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 4 of 4 products
Loading...