Image
Product
Price
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .75
- 19
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10017940, 10065640, 10065675, 10120065, 10135307, 10145119, 10188037, 10218423, 10227419, 10385281, 10441374, 1405531U00, 1405646R00, 1405670F05, 14244S, 15077061, 15123654, 15258060...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Pipe-4 To Engine | GAS | 6 Cyl 3.0L | 181 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length: 394
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.5
- 38
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
017362, 10-18910, 1021, 107706, 1130608, 1215, 1216, 1315196, 1318081, 134, 1349620, 134MF1, 1357182, 1372632, 1716932, 17A1578, 186058, 1881813...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Upper - Pipe To Radiator | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 132
- 5.2
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
10065571, 1030, 14-1782-0, 14213S, 2003, 20662, 23120, 25533059, 284076, 3009, 3188865, 361030, 4241670, 50762, 51317068, 522, 63726, 642209...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Pipe-3 To Valve | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Pipe To Intake Manifold | GAS | 6 Cyl 3.0L | 181 |
- Hose is inside vehicle under dashboard.; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10070, 10080350, 10145080, 10145101, 10284262, 14004S, 18070, 19130282, 1W7H 18K580 AB, 1W7Z 18472 AB, 2714401P00, 64429, 86003, 86006, 86010, 87603, 87918, 96455704...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Heater To Pipe-1 | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10030, 10239523, 10354454, 12553625, 14002S, 1405569A06, 1405616E10, 1405632F12, 14056V5022, 1628142020, 1628236030, 1628542010, 1629142020, 1635206, 1635221, 18030, 1J0122447BR, 24504912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | Automatic | Pipe To Throttle Body | GAS | 6 Cyl 3.0L | Turbocharged | 181 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Nissan 300ZX | Upper |
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1985 - Nissan 300ZX | Naturally Aspirated |
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1985 - Nissan 300ZX | Naturally Aspirated |
- OE Equivalent Fuel Cap
- Product Attributes:
- Grade Type: Oe Performance
- Shell Outside Diameter: 2.78
- Cam Type: Threaded
- Venting Type: Emission Control
- Thread Diameter: 1.77
- Lockable: No
- Depth: 2.05
- Type: Oe Equivalent Fuel Cap
-
Features:
- Fuel Caps are zinc-plated and dichromate dipped for superior corrosion resistance. Some models are made from rugged plastic
- EEC Fuel Caps meet OEM specifications & Federal and State Emission Requirements
- Two-way action pressure relief/vacuum relief valve allows fuel tank to “breathe” while preventing the escape of fuel fumes
- Seals are compounded from fuel-resistant rubber
- Exterior Fuel Caps have attractive chrome-plated finish
- OE Equivalent Fuel Caps feature rugged, heavy-duty construction. Meets or exceeds OEM specifications. Caps fit both shallow & deep cam filler necks - vented, non-vented & vented anti-surge.
This Part Fits the Following OEM/Substitute Numbers:
0K20142250, 10285948, 10817, 11817, 12335028, 12F46, 1325002-2, 15568336, 15597860, 15597861, 15619914, 15649035, 15671703, 159-0042, 15969279, 15978465, 15981957, 15996392...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Nissan 300ZX | V | 2960 | GAS | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 12 products
Loading...