2003 INFINITI G35 Gates Parts
Image
Product
Price
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Chain
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Stamped Steel
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
1-9276, 123034, 131-2290, 131-2424, 150-2020, 150-2320, 1520706, 18-1647, 20795, 210107Y00A, 210107Y025, 210107Y026, 21010AL525, 21010AL526, 21010AL527, 21010AL528, 21010JA10A, 21010JA11A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | GAS | 6 Cyl 3.5L | - |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 130
- 5.1
- End 1 Inside Diameter:
- .76
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .76
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11796, 14358S, 19129910, 19796, 88473, 92400AL500, 92400AL50A, 92401JK20A, 92402AL500, B88473
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Connector To Heater | GAS | 6 Cyl 3.5L | - |
- W/37 1/8" Belt O.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 37.125
- 943
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 36.56
- 929
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0511019001, 0K01118381A, 0K2AA15907, 0K2AA32907, 10186120, 1040365, 1172000Q2F, 1172000QAS, 1172040F00, 1172040F10, 11720F6100, 11720F6110, 1192042L01, 1192058S00, 1192058S01, 1192085500, 11920D4211, 1195054C00...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Air Conditioning | GAS | 6 Cyl 3.5L | - |
- W/37 7/8" Belt O.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 37.96
- 964
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 37.38
- 949
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
005435171, 1040372, 1040375, 1192004U00, 1192006P01, 1192060U00, 1192060U01, 11920AG900, 1195004U00, 1195059S02, 11950AR000, 11950AR00A, 128026, 128028, 14-0805-4, 141-1354, 141-1492, 146-040940...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Air Conditioning | GAS | 6 Cyl 3.5L | - |
- Cut to Length, 15"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Engine To Connector | GAS | 6 Cyl 3.5L | - |
- Cut to Length, 14"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Heater To Engine | GAS | 6 Cyl 3.5L | - |
- Cut to Length, 30"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | GAS | 6 Cyl 3.5L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1195
- 47
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1181
- 46.48
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
028260849A, 028260849F, 032145933, 032145933T, 038903137AA, 038903137L, 06H903137J, 06M903137T, 1004484, 1060465, 11281470027, 11281747277, 11287636368, 11288581628, 11920AL510, 12578000, 14-0715-8, 1539603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - INFINITI G35 | V | 3498 | Alternator and Power Steering | GAS | 6 Cyl 3.5L | - |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - INFINITI G35 | Oil Cooler (Upper) To Pipe |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - INFINITI G35 | Oil Cooler (Lower) To Pipe |
Showing 1 - 10 of 16 products
Loading...