Image
Product
Price
Additional Fitment Information:
| Vehicle | Position | Sub Model | Prod. Date Range |
|---|---|---|---|
| 2007 - INFINITI G35 | Lower | Journey | Fr:08-01-06 |
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - INFINITI G35 |
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 2007 - INFINITI G35 | VQ35HR |
- Main Cooling Fan Control Module. WARNING!! - DO NOT INSTALL THIS UNIT UNTIL YOU CHECK THE FAN MOTOR!! The primary cause of failure of this control unit is electrical overload due to a malfunctioning fan motor. If the replacement controller is installed without checking the motor (and the motor is also bad) it will damage the replacement controller as well. The manufacturer's warranty does not cover controllers damaged by bad motors.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2007 - INFINITI G35 | Journey |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 11.9
- 302
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 64324, 88438, 92411JK60A, 96456718, 96553218, D88438
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | Tee To Engine | GAS | 6 Cyl 3.5L | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 130
- 5.1
- End 1 Inside Diameter:
- .76
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .76
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11796, 14358S, 19129910, 19796, 88473, 92400AL500, 92400AL50A, 92401JK20A, 92402AL500, B88473
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | Heater To Connector | GAS | 6 Cyl 3.5L | - |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 37.96
- 964
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 37.38
- 949
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
005435171, 1040372, 1040375, 1192004U00, 1192006P01, 1192060U00, 1192060U01, 11920AG900, 1195004U00, 1195059S02, 11950AR000, 11950AR00A, 128026, 128028, 14-0805-4, 141-1354, 141-1492, 146-040940...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | Air Conditioning | GAS | 6 Cyl 3.5L | Coupe | - |
- Sept. 2006 & Newer
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1161
- 45.71
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1146
- 45.12
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
028260249D, 028260849D, 028260849J, 028260849L, 028260849N, 036145933AD, 037260849A, 037260849B, 1060450, 1097331, 1135719, 1172000QAG, 117204P10A, 1227545, 1238447H1, 14-0870-6, 1H75514001, 200690...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | Alternator and Power Steering | GAS | 6 Cyl 3.5L | Coupe | - |
- Aug. 2005 Thru Aug. 2006
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1195
- 47
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1181
- 46.48
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
028260849A, 028260849F, 032145933, 032145933T, 038903137AA, 038903137L, 06H903137J, 06M903137T, 1004484, 1060465, 11281470027, 11281747277, 11287636368, 11288581628, 11920AL510, 12578000, 14-0715-8, 1539603...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | Alternator and Power Steering | GAS | 6 Cyl 3.5L | Coupe | - |
- Optional Belt
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .947
- 24
- Outside Circumference:
- 2073
- 81.625
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2058
- 81.04
- Rib Quantity: 7
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1070810, 11720JK20A, 25-070810, 4070810, 4763795AC, 5070810, 5070810DR, 7K2055, 7K810, 7PK2056, 7PK2057, 7PK2058, 7PVK2057, 810K7, 810K7MK, K070810
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2007 - INFINITI G35 | V | 3498 | GAS | 6 Cyl 3.5L | Sedan | - |
Showing 1 - 10 of 21 products
Loading...