2016 Ford Expedition Gates Parts
Image
Product
Price
- 3mm Zip Tie Required for Installation
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 36.5
- 927
- Instruction Manual Included: Sheet K
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 35.91
- 912
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: 3 Mm Zip Tie
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
25-040359SF, 4040371S, 4K359SF, 4PK932EE, 4PKE912, BR3E 6C301 RA, BR3E 8A615 CA, BR3E 8A615 CB, BR3E 8A615 CC, BR3Z 8620 F, BR3Z 8620 Q, BR3Z 8620 S, BR3Z8620S, JK4 377 B, JK4364A, S040359
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Air Conditioning | GAS | 6 Cyl 3.5L | 213 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1405
- 55.31
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1390
- 54.71
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0124196014, 0126709007, 0127177007, 0129729388, 0129730388, 1060548, 11287520199, 124196014, 126709007, 127177007, 129729388, 129730388, 15994965, 1687799C1, 203943, 205766, 206700, 207755...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Alternator and Water Pump | GAS | 6 Cyl 3.5L | 213 |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford Expedition |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford Expedition |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford Expedition |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford Expedition |
- FleetRunner HD Micro-V Ribbed
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Ford Expedition | Alternator and Water Pump |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford Expedition |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Modular Components Included: Female Quick Connector, Male Quick Connector
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 171
- 6.75
- End 1 Inside Diameter:
- .56
- 14
- Material: Epdm, Plastic, Steel
- Modular: Yes
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 2
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
51441, 626-659, BL3Z 18472 D, F11210, KH559, R16384
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Heater Core Extension Inlet | GAS | 6 Cyl 3.5L | 213 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Modular Components Included: Female Quick Connector, Male Quick Connector
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 171
- 6.75
- End 1 Inside Diameter:
- .56
- 14
- Material: Epdm, Plastic, Steel
- Modular: Yes
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 2
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Heater Core Extension Outlet | GAS | 6 Cyl 3.5L | 213 |
Showing 1 - 10 of 11 products
Loading...