- Standard Uncoated Headers; 1-1/2 in. Tube Dia; 2-1/2 in. Coll; SHORTY Design
- Air Conditioning: Yes Power Steering: Power steering bracket 20120 required. Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.: Legal for use on '74-earlier vehicles without A.I.R.. Considered OEM replacement part, and do not require EO, when existing emission controls are not removed. Engine Family: SB FORD 260-302 (Windsor) Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27340 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:16g Primary Tube Diameter (in):1.50 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Square Variations:88406, 88408 Tube Style:Shorty Tube Size:1-1/2 in. Tube Material Thickness:16g Tube Length:Short Tubes Tube Diameter:1-1/2 in. Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Square Material:Mild Steel Manual Transmission - Floor:No Manual Transmission - Column:No Header Port Shape:Square Replacement Head Flange Gasket:27340 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Engine Notes:260-302W Collector Style:Ball and Socket Style (Gasketless) Collector Size:2-1/2 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:No Air Conditioning:Yes Reducers Included:Yes Header Style:Mid-Length Tube Gasket Or Seal Included:Yes Collector Attachment:2-1/2 in. Flange Thickness:0.3125 in. Bolts/Studs Included:Yes Engine Version:Ford Windsor Block (W) Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-1/2 IN. TUBE DIA.; 2-1/2 IN. COLL.; SHORTY DESIGN Tube Design:SHORT TUBES Collector Diameter:2-1/2 in. Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Notes :66-73 Ford Mustang 260-302W Contents:Header(s), new bolts, gasket(s) to head, reducer(s) and hardware, instructions Engine:Ford SB 260-289-302W
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
- Finish Type: Uncoated Mild Steel
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design:
- Short Tubes
- Standard
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Installation Hardware Included: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Title: Hedman Hedders Standard Uncoated Headers; 1-1/2 In. Tube Dia.; 2-1/2 In. Coll.; Shorty Design
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1973 - Ford Maverick | V | - | OHV | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
- Standard Uncoated Headers; 1-1/2 in. Tube Dia; 2-1/2 in. Coll; SHORTY Design
- Air Conditioning: Yes Power Steering: Power steering bracket 20120 required. Auto Transmission - Column: No Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: No Footnotes: (1) Without smog injection or injection heads. Footnotes: (6) Modification to stock exhaust required to retain catalytic converter. Emissions Notes: 1974 and earlier vehicles WITHOUT A.I.R.; Does not require EO if existing emission controls are not removed. Engine Family: SB FORD 260-302 (Windsor)
- Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 2-1/2 in. Coll.; SHORTY Design
- Product Attributes:
- California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
- Header Port Shape: Square
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Stock Profile Heads
- Tuned: No
- Cylinder Head Port Shape: Square
- Header Style: Mid-length Tube
- Manual Transmission - Column: No
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-1/2 In.
- Automatic Transmission - Column: No
- Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-1/2 In.
- Port Shape: Square
- Tube Length: Short Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 2-1/2 In.
- Tube Style: Shorty
- Engine Version: Ford Windsor Block (w)
- Variations: 88406, 88408
- Collector Size: 2-1/2 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 2-1/2 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Contents: Header(s), New Bolts, Gasket(s) To Head, Reducer(s) And Hardware, Instructions
- Finish Type: Uncoated Mild Steel
- Notes: 66-73 Ford Mustang 260-302w
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.50 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27340
- Tube Design: Standard
- Power Steering: Yes
- E.O. #: No
- Engine Notes: 260-302w
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Engine: Ford Sb 260-289-302w
- Air Conditioning: Yes
- Installation Hardware Included: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Title: Hedman Hedders Standard Uncoated Headers; 1-1/2 In. Tube Dia.; 2-1/2 In. Coll.; Shorty Design
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27340
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
-
Features:
- Handcrafted, Mild Steel Construction.
- The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing Ford Mustang headers for nearly as long as Mustangs have been on the road. Each set uses mild or stainless steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your SB Ford's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated mild steel, MID-LENGTH TUBE headers fit the most iconic passenger cars to come out of Ford and Mercury between 1964-1977, with a 260-302W. Among this prestigious list is 1964-73 Ford Mustang and Falcon, '66-73 Ranchero & Torino, '69-77 Maverick, '66-70 Fairlane, '67-73 Mercury Cougar and'70-73 Comet models fitted with a 260-302W engine. These headers fit automatic transmission equipped vehicles only. The long, smooth 1-1/2 in., rectangle port tube design provides superior exhaust flow over factory manifolds to let your Ford Windsor block engine breathe better, and produce more low-end torque and horsepower.
These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish, as well as 100% stainless steel construction.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1973 - Ford Maverick | V | - | OHV | United States | GAS | 8 Cyl 5.0L | Base | Naturally Aspirated | 302 |
Loading...