- MILD STEEL HEADERS; LONG; 67-91 2WD/4WD SB CHEVY TRUCKS/SUVS; 1-5/8 IN.-UNCOATED
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Some vehicles may encounter clutch shaft interference when cross shaft location is under or behind the driver side rear exhaust port. Use 69092 without A.I.R. Use 69093 with A.I.R. Order Elite 69892. Footnotes: (1) Without smog injection or injection heads. Footnotes: (103) Will fit with angle plug heads (Chevy aluminum only, L98). Footnotes: (121) Must modify rotary A/C bracket. Footnotes: (160) Early chassis only. Emissions Notes: RACE ONLY! NOT LEGAL for public street or highway use on '75-later vehicles. Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27500 Cylinder Head:Fits Factory GM Aluminum or Cast Iron, Angle Plug and Straight Plug Heads. Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Collector Bolts Included:Yes Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:16g Primary Tube Diameter (in):1.625 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Round Variations:69096, 69890 Tube Size:1-5/8 in. Tube Material Thickness:16g Tube Length:Long Tubes Tube Diameter:1-5/8 in. Tube Design:LONG TUBES Reducer Outlet Size:2-1/2 in. Power Steering:Yes Port Shape:Round Material:Mild Steel Manual Transmission - Floor:No Manual Transmission - Column:No Header Port Shape:Round Replacement Head Flange Gasket:27500 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Exhaust System Dia:2-1/2 in. Transmission Compatibility:may encounter clutch interference if cross shaft behind driver side rear port Collector Style:Ball and Socket Style (Gasketless) Collector Size:3 in. Automatic Transmission - Floor:Yes Automatic Transmission - Column:Yes Air Conditioning:Yes Reducers Included:Yes Header Style:Long Tube Gasket Or Seal Included:Yes Collector Attachment:3 in. Flange Thickness:0.25 in. Bolts/Studs Included:Yes Header Construction:Standard-Duty E.O. #:No California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Contents:headers, gaskets (when applicable), 3-bolt exhaust adapters, hardware Emissions Notes:NOT LEGAL FOR STREET USE ON '75-LATER MODEL YEARS! Legal for off-road use only. Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-5/8 IN. TUBE DIA.; 3 IN. COLL.; FULL LENGTH DESIGN Collector Diameter:3 in. Notes :67-91 GM. Full Size Blazer, Jimmy 283-400 2-4WD Chassis Compatibility:NOT For Vehicles With Offset (right) Engine Position! Tube Style:Long Tubes
- Long Tube, Standard-Duty Headers For 1967-91 Chevy/GMC 2WD & 4WD Pickup Trucks, Blazers & SUVs with 283-400 SB Chevy; 1-5/8 In. Long Tubes, 3 in. Ball/Socket Collector- UNCOATED Mild Steel
- Product Attributes:
- California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head:
- Fits Factory Gm Aluminum Angle Plug And Straight Plug Heads.
- Fits Factory Gm Aluminum Or Cast Iron, Angle Plug And Straight Plug Heads.
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Chassis Compatibility: Not For Vehicles With Offset (right) Engine Position!
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Variations: 69096, 69890
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
- Finish Type: Uncoated Mild Steel
- Notes: 67-91 Gm. Full Size Blazer, Jimmy 283-400 2-4wd
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction:
- Mild Steel- Standard-duty
- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design:
- Long Tubes
- Standard
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness:
- 0.25 In.
- 0.3125 In.
- Air Conditioning: Yes
- Installation Hardware Included: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Title: Hedman Hedders Standard Uncoated Headers; 1-5/8 In. Tube Dia.; 3 In. Coll.; Full Length Design
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
- Transmission Compatibility: May Encounter Clutch Interference If Cross Shaft Behind Driver Side Rear Port
-
Features:
- Handcrafted, Mild Steel Construction.
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing LONG and MID-LENGTH tube headers for Chevy trucks for nearly as long. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated, LONG-TUBE headers are one of Hedman's best selling Chevy truck headers. They fit a wide range of early to mid-year 1967-1987 2WD & 4WD Chevy/GMC 1/2 Ton and 3/4 ton trucks, Blazers and Suburbans (check the application listings for exact fitment), powered by a Small Block Chevy engine (without A.I.R. System). The smooth 1-5/8 in. tube design provides ample exhaust flow to let your truck's 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower under hood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Region |
|---|---|
| 1980 - Chevrolet K20 | United States |
- MILD STEEL HEADERS; LONG; 67-91 2WD/4WD SB CHEVY TRUCKS/SUVS; 1-5/8 IN.-UNCOATED
- Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Some vehicles may encounter clutch shaft interference when cross shaft location is under or behind the driver side rear exhaust port. Use 69092 without A.I.R. Use 69093 with A.I.R. Order Elite 69892. Footnotes: (1) Without smog injection or injection heads. Emissions Notes: RACE ONLY! NOT LEGAL for public street or highway use on '75-later vehicles.
- Long Tube, Standard-Duty Headers For 1967-91 Chevy/GMC 2WD & 4WD Pickup Trucks, Blazers & SUVs with 283-400 SB Chevy; 1-5/8 In. Long Tubes, 3 in. Ball/Socket Collector- UNCOATED Mild Steel
- Product Attributes:
- California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
- Header Port Shape: Round
- Quantity: Sold As A Pair.
- with A.I.R. System: No
- Cylinder Head: Fits Factory Gm Aluminum Angle Plug And Straight Plug Heads.
- Tuned: No
- Cylinder Head Port Shape: Round
- Header Style: Long Tube
- Manual Transmission - Column: No
- Flange Style: Standard
- Collector Bolts Included: Yes
- Bolts/Studs Included: Yes
- Chassis Compatibility: Not For Vehicles With Offset (right) Engine Position!
- Automatic Transmission - Floor: Yes
- with EGR: No
- Tube Material Thickness: 16g
- Tube Diameter: 1-5/8 In.
- Automatic Transmission - Column: Yes
- Package Contents: Headers, Ball And Socket Reducers (exhaust Adapters), Gaskets, Mounting Hardware
- Reducer Outlet Size: 2-1/2 In.
- Tube Size: 1-5/8 In.
- Port Shape: Round
- Tube Length: Long Tubes
- Manual Transmission - Floor: No
- Collector Diameter: 3 In.
- Tube Style: Long Tubes
- Variations: 69096, 69890
- Collector Size: 3 In.
- Header Finish: Uncoated
- Mounting Hardware Included: Yes
- Weld-Up: No
- Collector Attachment: 3 In.
- Header Fasteners Included: Yes
- Y-Pipe Included: No
- Contents: Headers, Gaskets (when Applicable), 3-bolt Exhaust Adapters, Hardware
- Finish Type: Uncoated Mild Steel
- Notes: 67-91 Gm. Full Size Blazer, Jimmy 283-400 2-4wd
- Motor Mounts Included: No
- Primary Tube Diameter (in): 1.625 In.
- Crossover Pipe Included: No
- Header Construction: Mild Steel- Standard-duty
- Replacement Head Flange Gasket: 27500
- Tube Design: Standard
- Power Steering: Yes
- E.O. #: No
- Exhaust System Dia: 2-1/2 In.
- Flange Thickness: 0.3125 In.
- Air Conditioning: Yes
- Installation Hardware Included: Yes
- Reducers Included: Yes
- Primary Tube Gauge: 16g
- Header Material: Mild Steel
- Title: Hedman Hedders Standard Uncoated Headers; 1-5/8 In. Tube Dia.; 3 In. Coll.; Full Length Design
- Catalytic Converter(s) Included: No
- Replacement Gasket: 27500
- Collector Style: Ball And Socket Style (gasketless)
- Emissions Notes: Not Legal For Street Use On '75-later Model Years! Legal For Off-road Use Only.
- Transmission Compatibility: May Encounter Clutch Interference If Cross Shaft Behind Driver Side Rear Port
-
Features:
- Handcrafted, Mild Steel Construction.
- Long Tube Header Design Provides Excellent Top-End Horsepower and Torque.
- Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
- Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
- Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
- Proud To Say, Made In The USA, Since 1954!
Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing LONG and MID-LENGTH tube headers for Chevy trucks for nearly as long. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. Hedman's unique, gasketless ball and socket collector design allows your Small Block Chevy exhaust system to bolt up, even if it is not perfectly aligned with the header collectors.
These uncoated, LONG-TUBE headers are one of Hedman's best selling Chevy truck headers. They fit a wide range of early to mid-year 1967-1987 2WD & 4WD Chevy/GMC 1/2 Ton and 3/4 ton trucks, Blazers and Suburbans (check the application listings for exact fitment), powered by a Small Block Chevy engine (without A.I.R. System). The smooth 1-5/8 in. tube design provides ample exhaust flow to let your truck's 283-400 SB Chevy engine breathe easy, and produce maximum horsepower and torque. These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower under hood temperatures, these headers are also available with a silver or black ceramic-metallic finish.
Each set includes a pair of gaskets, header flange bolts and collector bolts. No collector gasket is needed.
Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.
| Vehicle | Block | CC | Region | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1980 - Chevrolet K20 | V | - | United States | 8 Cyl 6.6L | Chevrolet | 400 |
Loading...