2000 Jeep Cherokee JKS Manufacturing Parts
Image
Product
Price
- Quicker Disconnect Sway Bar Links
- Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel 4-6" Lift
- Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- Installation Time: 1-2
- Installation Difficulty: Moderately Easy
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2000 - Jeep Cherokee | United States |
- ACOS Front Adjustable Coil Spacer
- Most vehicles require additional parts or modifications to accommodate the immediate increase in ride height Installation may require minor vehicle modifications - refer to instructions
- Front Adjustable Coil Spacer | ACOS | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Title: Acos Front Adjustable Coil Spacer
-
Features:
- Variable length coil spring spacer allows convenient ride height adjustments without removing any suspension components
- Adjustable lift height from 1-1/2" to 3-3/4
- Compensates for uneven load distribution, spring settling, and sagging
- Instantly increases vehicle ride height upon installation for immediate benefits
- Eliminates need to replace coil springs to accommodate future modifications
- Technically advanced design and billet construction dramatically enhances suspension appearance
- New Dura-Thane isolators utilized to prevent noise transfer, and bump stops for durability
- Dial in ride height on your Jeep Wrangler TJ or LJ with JKS ACOS adjustable front coil spring spacers. The range of ride height adjustment is from 1-1/2" to 3-3/4" -- without taking apart suspension components. ACOS adjustable coil spring spacers compensate for uneven load distribution and spring settling. They can save you from having to replace coil springs as you add equipment weight. The high-tech, billet design looks great, too. Dura-Thane isolators prevent noise transfer.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2000 - Jeep Cherokee | Front | United States |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 1-3.5" Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 1"-3.5" Lift | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2000 - Jeep Cherokee | Front | United States |
- HD Leaf Spring Shackle
- HD Leaf Spring Shackle | Cherokee XJ, Comanche MJ, Wagoneer SJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Hd Leaf Spring Shackle
-
Features:
- Boomerang style shackle optimizes rear suspension travel by allowing full compression and extension of leaf springs
- Extended length increases rear ride height 1 in. for improved tire clearance
- Greaseable Dura-Thane chassis bushing is included for smooth, quiet operation and easy lubrication
- Rigid design prevents binding and bushing fatigue commonly associated with OE and inferior shackle designs
- Heavy duty construction ensures correct operation of springs and bushings under severe off-road conditions
- Durable powder coat finish provides long-lasting protection
- Lift your Jeep Cherokee XJ, MJ or Wagoneer SJ approximately +1” with JKS heavy duty leaf spring shackles. The boomerang-style design optimizes travel with full compression and extension while making room for larger tires. Greaseable Dura-Thane bushings provide smooth, quiet operation while preventing bind and bushing fatigue common. Heavy duty construction with durable powder coat finish. Fits: Jeep XJ, MJ rear leaf spring eyes and SJ front leaf spring eyes. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2000 - Jeep Cherokee | Rear | United States |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 4"+ Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 4"+ Lift | Wrangler TJ & LJ, Cherokee XJ & Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
-
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2000 - Jeep Cherokee | Front | United States |
- Quicker Disconnect Sway Bar Links
- 2-3.5" Lift Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel
- Quicker Disconnect Sway Bar Links | 0 - 4" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Installation Time: 1-2
- Installation Difficulty: Moderate
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2000 - Jeep Cherokee | United States |
Showing 1 - 6 of 6 products
Loading...