2014 Jeep Wrangler JK JKS Manufacturing Parts
Image
Product
Price
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 5.625" Max Adjusted Length - 7.125" *See Instructions for further details. Not compatible with aftermarket swaybars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 5.625
- For Use With Lift Heights: 0-2"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 5-1/2 To 7-1/8
- Maximum Adjusted Length: 7.125
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Fits vehicles with 0"-2" Lift Only
- Gain 30 percent more axle articulation by disconnecting your front swaybar
- Also fits Wrangler JK right hand drive models
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Wrangler JK |
- Front Adjustable Track Bar
- Suggested Starting Length - 33.25" Min. Adjusted Length - 32.2" Max Adjusted Length - 34.2" *See Instructions for further details. Does NOT fit Right Hand Drive
- JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.
- In the box: All Necessary Mounting / Installation Hardware Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.20
- For Use With Lift Heights: 1-6"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 34.20
- Title: Front Adjustable Track Bar
- Suggested Starting Length: 33.25
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- JKS adjustable front track bar for Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing with powder coated and zinc finish. Heavy duty rubber bushings at both ends provide quiet, vibration-free operation. For JK with up to 6" lift. Bolt-on installation. Does NOT fit right hand drive JK.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Wrangler JK |
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-6" lift. Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: Angle Measuring Tool; Factory Service Manual (recommended); Grease Gun With Zerk Fitting Coupler; Medium Strength Threadlocker; Metric/standard Socket Wrench Set; Torque Wrench; Wheel Bearing Grease
-
Features:
- Fits vehicles with 2.5"-6.0" Lift Only
- Gain up to 30 percent more axle articulation by disconnecting your front sway bar
- Also fits Wrangler JK right hand drive models
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-6" lift. Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Wrangler JK |
- Adjustable Rear Track Bar
- Suggested Starting Length - 40.38" Min. Adjusted Length - 39.43" Max Adjusted Length - 42.43" *See Instructions for further details. Fits 0 to 6.0 in. suspension lift. Rear Trackbar Brace [JKS PN: OGS169] is strongly recommended to reinforce weak factory mount on axle. Trackbar Brace fits Left Hand Drive Models Only.
- Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.
- In the box: All Necessary Mounting / Installation Hardware Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 39.43
- For Use With Lift Heights: 0-6"
- Installation Time: 6
- Horizontal Position: Rear
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 42.43
- Title: Adjustable Rear Track Bar
- Suggested Starting Length: 40.38
-
Features:
- Zinc plated and powder coated for protection from corrosion and debris
- Also fits Wrangler JK right hand drive models
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
- Install a new adjustable rear track bar on your RHD Jeep Wrangler JK to properly align and control lateral axle movement left to right. The heavy duty track bar can be adjusted to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, thick wall DOM CNC-bent tubing and powder coated and zinc finish. Heavy-duty rubber bushings at both ends provide quiet, vibration-free operation. Fits right hand drive JK only with up to 6" lift. Bolt-on installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Wrangler JK |
- Drag Link Flip Kit
- For use on LHD JK models with at least 2" of suspension lift Requires 3" of front bump stop extension, JKS1130 available separately Should not be combined with other track bar relocation system Can be used with factory replacement adjustable track bars To be used with factory pitman arm for proper geometry Requires 17" diameter wheel or larger, with 4.75" backspacing or less
- JKS Manufacturing?s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8? step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Drag Link Flip Kit
-
Features:
- Provide better performing, solid steering feel
- Flattens out steering angle when combined with 2" lift or more
- 7/8" Step Drill Bit Included
- JKS Manufacturing’s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8” step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Jeep Wrangler JK |
Showing 1 - 5 of 5 products
Loading...