Select a vehicle to find exact fit parts

2002 Ford Focus

Back to vehicles list

2002 Ford Focus K&N Parts

Choose your Submodel for your 2002 Ford Focus

Base LX Manual SE SVT ZTS ZTW ZX3 ZX5

Showing 1 - 10 of 15 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2002 Ford Focus Engine Oil Filter 4 Cyl 2.0L K&N

Oil Filter
H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:

1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	LX	P	121


Brand	K&N
Part #	HP-2009
Condition	New
Warehouse	C

2002 Ford Focus Engine Oil Filter 4 Cyl 2.0L K&N

Oil Filter
H-5.063 in.; OD-3 in.; 3/4 In. - 16; psi Relief Valve 11-14 Pro-Series Oil Filter w/o Wrench Off Nut
K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
High Flow Oil Filter
Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.000 In. (127mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.300 In. (84 Mm)
- Package Material: Paperboard
- Product Box Length: 3.300 In. (84mm)
- PSI Relief Valve: 11-14
- Removal Nut: No
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.

This Part Fits the Following OEM/Substitute Numbers:

1220323, 1220800, 122B323, 51516, 51762, FL400A, FL400S, HP10, HP2009, L20089, L20195, L35098, M1209, PFL400A, PH3600, PH5803, SS2009, YF0914302A...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	LX	P	121


Brand	K&N
Part #	PS-2009
Condition	New
Warehouse	C

2002 Ford Focus Air Filter 4 Cyl 2.0L K&N

Universal Air Filter-Carbon Fiber Top
Round Tapered; Clamp-On; 4 1/2 in. Flange; 5 5/8 in. B; 4 in. T; 6 in. H
K/N Composite Top Universal Air Filters-With advanced composite technology; carbon fiber provides the ultimate in strength with minimal weight. Carbon fiber provides 1/3 less weight than a conventional filter top.
Universal Carbon Fiber Top Air Filter
Product Attributes:
- Oil Included:
  - Filter Is Pre-oiled
  - Yes
- Flange Length: 0.625 In. (16mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 5.875 In. (149mm)
- Item Weight: 1.500 Lbs. (0.7 Kg)
- Air Filter Large End Diameter: 5.875 In. (149mm)
- Item Height: 6.000 In. (152mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Package Content: 1 Air Filter
- Top Style: Carbon Fiber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Top Material: None
- Flange Angle: 0 Degree
- Air Filter Element Washable: Yes
- Shape: Round Tapered
- Top Outside Diameter: 4.000 In. (102mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.11 Oz (33 Ml)
- Flange Inside Diameter: 4.500 In. (114mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Flange Type: Centered
- Package Type: Box
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
The RP-5101 Universal Air Filter is constructed from an oiled cotton filter media. It comes with a K&N embossed carbon fiber top for strength and durability. The carbon fiber element adds to the light-weight design and gives this filter a smooth glass like finish. The RP-5101 is a clamp-on filter that has an inside flange diameter of 4-1/2 inches and a flange length of 5/8 inches. The base is 5-7/8 inches and the filter height is 6 inches.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	SVT	5	121


Brand	K&N
Part #	RP-5101
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Performance Air Intake System
Polished; Includes Air Filter/Tubing; Estimated Horsepower Gain 3.88 HP At 2931 RPM;CARB E.O. D-269-27
K/N s easy to install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive chrome-like finish.
Typhoon Short Ram Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 3.88 Hp @ 2931 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4860
- Horse Power Increase: 4 Hp
- Item Weight: 5.800 Lbs. (2.6 Kg)
- Intake Pipe Inlet Length: 22.000 In. (559mm)
- RPM: 2931
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.000 In. (559mm)
- System Type: Short Ram
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
The K&N 69-3510TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and a provided Torx wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	ZX5	3	121


Brand	K&N
Part #	69-3510TP
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Performance Air Intake System
Red; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 6.15 HP At 5000 RPM;CARB E.O. D-269-30
K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Typhoon Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.15 Hp @ 5000 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4960
- Item Weight: 6.400 Lbs. (2.9 Kg)
- RPM: 5000
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Red
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 6 Hp
- Intake Pipe Inlet Length: 11.000 In. (279mm)
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 11.000 In. (279mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	SVT	5	121


Brand	K&N
Part #	69-3511TR
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 3.88 HP At 2931 RPM;CARB E.O. D-269-27
K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish.
Performance Air Intake System
Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
Features:
- Performance Air Intake System
The KN 69-3510TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory mass air sensor and a couple of replacement silicone vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and a Torx T20 wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	ZX5	3	121


Brand	K&N
Part #	69-3510TB
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Performance Air Intake System
Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 6.15 HP At 5000 RPM;CARB E.O. D-269-30
K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Typhoon Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.15 Hp @ 5000 Rpm
- Air Filter Outlet Width: 2.750 In. (70mm)
- Replacement Filter: Ru-4960
- Item Weight: 6.400 Lbs. (2.9 Kg)
- Intake Pipe Inlet Length: 11.000 In. (279mm)
- RPM: 5000
- Air Filter Outlet Length: 2.750 In. (70mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 11.000 In. (279mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.750 In. (70mm)
Features:
- Guaranteed To Increase Horsepower And Torque
- Mandrel-Bent Aluminum Intake Tube Paired
- Oversized Oiled Cotton Air Filter
- Engineered To Provide High Airflow And Exceptional Filtration
- Replaces Factory Air Filter And Intake Tube
- 10-Year/Million Mile Limited Warranty
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	SVT	5	121


Brand	K&N
Part #	69-3511TP
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Performance Air Intake System
Blue; Includes Air Filter/Tubing; Estimated Horsepower Gain 3.88 HP At 2931 RPM;CARB E.O. D-269-27
K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish.
Typhoon Short Ram Cold Air Induction Kit
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 3.88 Hp @ 2931 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4860
- Horse Power Increase: 4 Hp
- Item Weight: 5.800 Lbs. (2.6 Kg)
- Intake Pipe Inlet Length: 22.000 In. (559mm)
- RPM: 2931
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.000 In. (559mm)
- System Type: Short Ram
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
Features:
- Performance Air Intake System
The KN 69-3510TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory mass air sensor and a couple of replacement silicone vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and a Torx T20 wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	ZX5	3	121


Brand	K&N
Part #	69-3510TB
Condition	New
Warehouse	C

2002 Ford Focus Air Intake Kit 4 Cyl 2.0L K&N

Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Blue Intake; Estimated Horse Power Gain 6.15 HP At 5000 RPM;CARB E.O. D-269-30
K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
Performance Air Intake System
Product Attributes:
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
Features:
- Guaranteed To Increase Horsepower And Torque
- Mandrel-Bent Aluminum Intake Tube Paired
- Oversized Oiled Cotton Air Filter
- Engineered To Provide High Airflow And Exceptional Filtration
- Replaces Factory Air Filter And Intake Tube
- 10-Year/Million Mile Limited Warranty
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Engine VIN	CID
2002 - Ford Focus	L	1989	4 Cyl 2.0L	SVT	5	121


Brand	K&N
Part #	69-3511TP
Condition	New
Warehouse	C

2002 Ford Focus Air Cleaner Assembly 4 Cyl 2.0L K&N

Universal Clamp-On Air Filter
Round Tapered; Clamp-On; Base OD 6 in.; Flange L-2 in.; Flange ID-2.5 in.; Centered; Rubber End; Filter Length 6.5 in. Replacement Filter For Performance Intake Kit [PN69-3510TB]~Replacement Filter For Performance Intake Kit [PN69-3510TP]
Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
Universal Air Cleaner Assembly
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 2.000 In. (51mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 6.000 In. (152mm)
- Item Weight: 1.300 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 11.000 In. (279mm)
- Filter Material: Cotton Gauze
- Product Box Width: 6.380 In. (162mm)
- Product Box Length: 6.380 In. (162mm)
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Item Height: 6.500 In. (165mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Top Style: Rubber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Top Material: None
- Flange Angle: 0 Degree
- CARB/Air Horn Diameter: 2.500 In.
- Shape: Round Tapered
- Top Outside Diameter: 5.000 In. (127mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.24 Oz (37 Ml)
- Flange Inside Diameter: 2.500 In. (64mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Flange Type: Centered
- Package Type: Box
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.