Image
Product
Price
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 2429 | 4 Cyl 2.4L | SRT-4 | 148 |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16; psi Relief Valve 11-14 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.000 In. (127mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.300 In. (84 Mm)
- Package Material: Paperboard
- Product Box Length: 3.300 In. (84mm)
- PSI Relief Valve: 11-14
- Removal Nut: No
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
1220323, 1220800, 122B323, 51516, 51762, FL400A, FL400S, HP10, HP2009, L20089, L20195, L35098, M1209, PFL400A, PH3600, PH5803, SS2009, YF0914302A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 2429 | 4 Cyl 2.4L | SRT-4 | 148 |
- Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Polished Intake; Estimated Horse Power Gain 5.3 HP At 4641 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.
- Performance Air Intake System
- Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Performance Air Intake System
- The KN 69-2520TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet and Dodge Neon models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2520TR cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 4.85 HP At 5600 RPM;CARB E.O. D-269-31
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s famous million mile limited warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 4.85 Hp @ 5600 Rpm
- Replacement Filter: Ru-5141
- Item Weight: 8.500 Lbs. (3.9 Kg)
- Horse Power Increase: 5 Hp
- RPM: 5600
- Product Box Height: 12.250 In. (311mm)
- Product Box Width: 12.250 In. (311mm)
- Package Material: Paperboard
- Product Box Length: 20.250 In. (514mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 5.375 In. (137mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- The K&N 57-1534 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Dodge Neon models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-1534 air intake comes with a vented rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the air filter and into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
- Performance Air Intake System
- Red; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Tubing; Estimated Horsepower Gain 5.3 HP At 4641 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 5.3 Hp @ 4641 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Horse Power Increase: 5 Hp
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Intake Pipe Inlet Length: 22.500 In. (572mm)
- RPM: 4641
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.500 In. (572mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Performance Air Intake System
- The KN 69-2520TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet and Dodge Neon models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2520TR cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
- Performance Air Intake System
- Includes Blue; Air Filter/Water Repellent DryCharger Filter Wrap/Blue Tubing; Estimated Horsepower Gain 12.17 HP At 5312 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a blue powder coat finish.
- Typhoon Complete Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 12.17 Hp @ 5312 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Horse Power Increase: 12 Hp
- Item Weight: 7.600 Lbs. (3.5 Kg)
- Intake Pipe Inlet Length: 19.500 In. (495mm)
- RPM: 5312
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.500 In. (572mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Performance Air Intake System
- The KN 69-2521TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge NeonSRT-4 models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2521TB cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the turbocharger inlet for a guaranteed power gain. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 2429 | 4 Cyl 2.4L | SRT-4 | 148 |
- Performance Air Intake System
- Includes Red Air Filter/Water Repellent DryCharger Filter Wrap/Polished Tubing; Estimated Horsepower Gain 12.17 HP At 5312 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish.
- Typhoon Complete Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 12.17 Hp @ 5312 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Horse Power Increase: 12 Hp
- Item Weight: 7.600 Lbs. (3.5 Kg)
- Intake Pipe Inlet Length: 19.500 In. (495mm)
- RPM: 5312
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.500 In. (572mm)
- System Type: Complete Cold Air
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Performance Air Intake System
- The KN 69-2521TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Neon SRT-4 models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2521TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the turbo inlet for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 2429 | 4 Cyl 2.4L | SRT-4 | 148 |
- Performance Air Intake System
- Polished; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Tubing; Estimated Horsepower Gain 5.3 HP At 4641 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a chrome-like finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 5.3 Hp @ 4641 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Horse Power Increase: 5 Hp
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Intake Pipe Inlet Length: 22.500 In. (572mm)
- RPM: 4641
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 22.500 In. (572mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Performance Air Intake System
- The KN 69-2520TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Neon, ACR, and RT as well as Chrysler Neon and Neon II models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2520TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing cooler air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Neon | L | 1996 | 4 Cyl 2.0L | SXT | 122 |
Showing 1 - 10 of 20 products
Loading...