Image
Product
Price
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | 4 Cyl 2.0L | LX | P | 121 |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Ford Focus | L | - | 4 Cyl 2.3L | ZX5 | 140 |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Ford Focus | L | - | 4 Cyl 2.3L | ZX5 | 140 |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16; psi Relief Valve 11-14 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.000 In. (127mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.300 In. (84 Mm)
- Package Material: Paperboard
- Product Box Length: 3.300 In. (84mm)
- PSI Relief Valve: 11-14
- Removal Nut: No
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
1220323, 1220800, 122B323, 51516, 51762, FL400A, FL400S, HP10, HP2009, L20089, L20195, L35098, M1209, PFL400A, PH3600, PH5803, SS2009, YF0914302A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | 4 Cyl 2.0L | LX | P | 121 |
- Universal Air Filter-Carbon Fiber Top
- Round Tapered; Clamp-On; 4 1/2 in. Flange; 5 5/8 in. B; 4 in. T; 6 in. H
- K/N Composite Top Universal Air Filters-With advanced composite technology; carbon fiber provides the ultimate in strength with minimal weight. Carbon fiber provides 1/3 less weight than a conventional filter top.
- Universal Carbon Fiber Top Air Filter
- Product Attributes:
- Oil Included:
- Filter Is Pre-oiled
- Yes
- Flange Length: 0.625 In. (16mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 5.875 In. (149mm)
- Item Weight: 1.500 Lbs. (0.7 Kg)
- Air Filter Large End Diameter: 5.875 In. (149mm)
- Item Height: 6.000 In. (152mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Package Content: 1 Air Filter
- Top Style: Carbon Fiber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Top Material: None
- Flange Angle: 0 Degree
- Air Filter Element Washable: Yes
- Shape: Round Tapered
- Top Outside Diameter: 4.000 In. (102mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.11 Oz (33 Ml)
- Flange Inside Diameter: 4.500 In. (114mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Flange Type: Centered
- Package Type: Box
- Oil Included:
-
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
- The RP-5101 Universal Air Filter is constructed from an oiled cotton filter media. It comes with a K&N embossed carbon fiber top for strength and durability. The carbon fiber element adds to the light-weight design and gives this filter a smooth glass like finish. The RP-5101 is a clamp-on filter that has an inside flange diameter of 4-1/2 inches and a flange length of 5/8 inches. The base is 5-7/8 inches and the filter height is 6 inches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | 4 Cyl 2.0L | SVT | 5 | 121 |
- Performance Air Intake System
- Red; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 6.15 HP At 5000 RPM;CARB E.O. D-269-30
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.500 In. (140mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.15 Hp @ 5000 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-4960
- Item Weight: 6.400 Lbs. (2.9 Kg)
- RPM: 5000
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 2.750 In. (70mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Red
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 2.750 In. (70mm)
- Horse Power Increase: 6 Hp
- Intake Pipe Inlet Length: 11.000 In. (279mm)
- Air Filter Element Washable: Yes
- Couplers Included: 1
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 11.000 In. (279mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | 4 Cyl 2.0L | SVT | 5 | 121 |
- Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 8.46 HP At 5800 RPM;CARB E.O. D-269-38
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a chrome-like finish.
- Performance Air Intake System
- Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Performance Air Intake System
- The KN 69-3512TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3512TP cold-air intake consists of a black rubber topped KN high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Ford Focus | L | - | 4 Cyl 2.3L | ZX5 | 140 |
- Performance Air Intake System
- Red; Includes Air Filter/Water Repellent DryCharger Filter Wrap/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5800 RPM;Not Legal For Sale Or Use In California
- K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 8.46 Hp @ 5800 Rpm
- Air Filter Outlet Width: 2.500 In. (64mm)
- Replacement Filter: Ru-4950
- Item Weight: 6.000 Lbs. (2.7 Kg)
- Intake Pipe Inlet Length: 28.500 In. (724mm)
- RPM: 5800
- Air Filter Outlet Length: 2.500 In. (64mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.500 In. (64mm)
- Intake Pipe Outlet Length: 28.500 In. (724mm)
- System Type: Cold Air
- Clamp Quantity: 3
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.500 In. (64mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-3512TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3512TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Ford Focus | L | - | 4 Cyl 2.3L | ZX5 | 140 |
- Performance Air Intake System
- Includes Air Filter/Adaptor/Tubing; Estimated Horsepower Gain 11.85 At 5797 RPM;Not Legal For Sale Or Use In California
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K/N air intakes come with K/N s famous million mile limited warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 5.563 In. (141mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 11.85 Hp @ 5797 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- Replacement Filter: Rx-4990
- Item Weight: 7.100 Lbs. (3.2 Kg)
- RPM: 5797
- Product Box Height: 12.500 In. (318mm)
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 3.000 In. (76mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 3
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.000 In. (76mm)
- Horse Power Increase: 12 Hp
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- The K&N AirCharger 63-1101 air intake system replaces the restrictive factory air filter and air intake housing in some Ford Focus models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Focus's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1101 air intake comes with a K&N XStream Top air filter designed for higher air flow and durability. It directs air through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The XStream Top air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Ford Focus | L | - | 4 Cyl 2.3L | ZX5 | 140 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 5.51 HP At 6500 RPM;CARB E.O. D-269-31
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N 10-Year/Million Mile Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 5.51 Hp @ 6500 Rpm
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Replacement Filter: Rp-5101
- Item Weight: 6.900 Lbs. (3.1 Kg)
- RPM: 6500
- Product Box Height: 12.250 In. (311mm)
- Product Box Width: 12.250 In. (311mm)
- Couplers Included: 3
- Package Material: Paperboard
- Product Box Length: 20.250 In. (514mm)
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 5.875 In. (149mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2004 - Ford Focus | L | 1989 | 4 Cyl 2.0L | SVT | 5 | 121 |
Showing 1 - 10 of 18 products
Loading...