2004 Honda Element K&N Parts
Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Element |
- Oil Filter; Spin-On
- High Flow Premium Media; H-3.344 in.; OD-2.672 in.; psi Relief Valve 11-17
- K/N Select Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Select Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Select Oil Filters are available for canister and cartridge type oil filter applications.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Element |
- Universal Clamp-On Air Filter
- Round Tapered; Clamp-On; Base OD 6 in.; Flange L-2 in.; Flange ID-2.75 in.; Centered; Rubber End; Filter Length 5.5 in. Replacement Filter For Performance Intake Kit [PN69-1015TB]~Replacement Filter For Performance Intake Kit [PN69-1015TP]
- Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
- Universal Air Cleaner Assembly
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 2.000 In. (51mm)
- Flange Offset: 0.000 In. (0mm)
- WARNING CA Proposition 65: Yes
- Base Outside Diameter: 6.000 In. (152mm)
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Machine Washable: Yes
- Product Box Height: 7.750 In. (197mm)
- Filter Material: Cotton Gauze
- Product Box Width: 6.810 In. (173 Mm)
- Product Box Length: 6.810 In. (173mm)
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Item Height: 5.500 In. (140mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Top Style: Rubber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Top Material: None
- Flange Angle: 0 Degree
- CARB/Air Horn Diameter: 2.750 In.
- Shape: Round Tapered
- Top Outside Diameter: 5.000 In. (127mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.16 Oz (34 Ml)
- Flange Inside Diameter: 2.750 In. (70mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Flange Type: Centered
- Package Type: Box
-
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
- K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
- Performance Air Intake System
- Includes Red Air Filter/Blue Tubing; Estimated Horsepower Gain 6.96 HP At 4800 RPM;CARB E.O. D-269-32 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Blue [SR]
- K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish.
- Typhoon Short Ram Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 6.96 Hp @ 4800 Rpm
- Air Filter Outlet Width: 2.750 In. (70mm)
- Replacement Filter: Ru-4960
- Item Weight: 6.600 Lbs. (3 Kg)
- Intake Pipe Inlet Length: 25.000 In. (635mm)
- RPM: 4800
- Air Filter Outlet Length: 2.750 In. (70mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 25.000 In. (635mm)
- System Type: Short Ram
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Performance Air Intake System
- The KN 69-1015TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Element models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1015TB air intake comes with a black rubber topped KN high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory air temperature sensor and vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
- Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 6.96 HP At 4800 RPM;CARB E.O. D-269-32
- K/N s easy to install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive chrome-like finish.
- Performance Air Intake System
- Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Performance Air Intake System
- The KN 69-1015TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Element models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1015TP air intake comes with a black rubber topped KN high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Element |
- Round; Red Cotton Gauze Air Filter; Natural Stainless Steel Clamp; Blue Intake Pipe;Estimated Horse Power Gain 6.96 HP At 4800 RPM;CARB E.O. D-269-32
- K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish.
- Performance Air Intake System
- Product Attributes:
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Prop 65 (C, R or CR): Cr
-
Features:
- Performance Air Intake System
- The KN 69-1015TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Element models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1015TB air intake comes with a black rubber topped KN high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory air temperature sensor and vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the KN catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Element |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing; Estimated Horsepower Gain 6.96 HP At 4800 RPM;CARB E.O. D-269-32 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [SR]
- K/N s easy to install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive chrome-like finish.
- Typhoon Short Ram Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Regular
- Estimated Horse Power Gain: 6.96 Hp @ 4800 Rpm
- Air Filter Outlet Width: 2.750 In. (70mm)
- Replacement Filter: Ru-4960
- Item Weight: 6.600 Lbs. (3 Kg)
- Intake Pipe Inlet Length: 25.000 In. (635mm)
- RPM: 4800
- Air Filter Outlet Length: 2.750 In. (70mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 25.000 In. (635mm)
- System Type: Short Ram
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Performance Air Intake System
- The KN 69-1015TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Element models. The restrictive factory air filter and air intake housing are replaced by the KN Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1015TP air intake comes with a black rubber topped KN high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
Showing 1 - 7 of 7 products
Loading...