2018 Chevrolet Corvette K&N Parts
Choose your Submodel for your 2018 Chevrolet Corvette
Image
Product
Price
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- High Flow Premium Media; H-3.75 in.; OD-3 in.; psi Relief Valve 22-28
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Replacement Air Filter
- Unique; H-8.438 in.; L-9.625 in.; W-2.5 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Top Outside Length: 6.750 In. (171mm)
- Item Weight: 1.900 Lbs. (0.9 Kg)
- Machine Washable: Yes
- Product Box Height: 12.060 In. (306mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 6.130 In. (156mm)
- Product Box Length: 12.060 In. (306mm)
- Top Outside Width: 2.438 In. (62mm)
- Air Filter Large End Diameter: 9.625 In. (244mm)
- Item Height: 8.438 In. (214mm)
- Prop 65 (C, R or CR): Cr
- Base Inside Width: 2.500 In. (64mm)
- Number of Flanges: None
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Flange Angle: 0 Degree
- Base Outside Width: 5.000 In (127mm)
- Shape: Unique
- Base Outside Length: 9.625 In. (244mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.89 Oz (56 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Base Inside Length: 7.063 In. (179mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
23107355, 84032895, A3191C, AF9967, CA12062, PA9967, SA90145, WA10171
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Corvette |
- Oil Filter; Spin-On
- High Flow Premium Media; H-3.406 in.; OD-2.938 in.; psi Relief Valve 22-28
- K/N Select Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Select Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Select Oil Filters are available for canister and cartridge type oil filter applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 12.51 HP At 4998 RPM;Off-Road Use Only Off Road Use Only~Excludes Z06 And ZR1
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K/N air intakes come with K/N s No-Hassle Lifetime Limited warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.000 In. (178mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.51 Hp @ 4998 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Rp-5285
- Item Weight: 11.900 Lbs. (5.4 Kg)
- RPM: 4998
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 2.125 In. (54mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 7
- Intake Pipe Color: Black
- Clamp Color: Black
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.688 In. (94mm)
- Horse Power Increase: 13 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- The K&N 63-3081 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3081 air intake comes with an ultra-lightweight carbon fiber K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | LT1 | Stingray | 7 | Naturally Aspirated |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 12.51 HP At 4998 RPM;Off-Road Use Only Excludes Z06 And ZR1
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K/N air intakes come with K/N s No-Hassle Lifetime Limited warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.000 In. (178mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 12.51 Hp @ 4998 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Rp-5285
- Item Weight: 11.900 Lbs. (5.4 Kg)
- RPM: 4998
- Product Box Height: 14.500 In. (368mm)
- Filter Material: Cotton Gauze
- Product Box Width: 15.500 In. (394 Mm)
- Air Filter Outlet Length: 2.125 In. (54mm)
- Product Box Length: 24.100 In. (612mm)
- Clamp Quantity: 7
- Intake Pipe Color: Black
- Clamp Color: Black
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 3.688 In. (94mm)
- Horse Power Increase: 13 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- The K&N 63-3081 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3081 air intake comes with an ultra-lightweight carbon fiber K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | LT1 | Stingray | 7 | Naturally Aspirated |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 50.71 HP At 5340 RPM;Off-Road Use Only
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- 63 Series Aircharger Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 7.000 In. (178mm)
- Clamp Style: Spring
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 50.71 Hp @ 5340 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Rp-5285
- Item Weight: 10.900 Lbs. (4.9 Kg)
- RPM: 5340
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 18.250 In. (464 Mm)
- Product Box Length: 18.250 In. (464mm)
- Intake Pipe Color: None
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Carbon Fiber
- Horse Power Increase: 51 Hp
- Air Filter Element Washable: Yes
- Package Material: Paperboard
- Couplers Included: 2
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed Horsepower Gain
- Designed To Improve Throttle Response And Engine Sound
- Easy To Install
- Replaces Entire Factory Air Intake System
- Lasts Up To 100 000 Miles Before Service Required
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | LT4 | Z06 | 6 | Supercharged |
- Universal Air Filter-Carbon Fiber Top
- Oval Tapered; 3 11/16 in. Flange OD; 8 3/4 in. x 5 1/2 in. BD; 6 3/8 in. x 3 3/16 in. TD; 7 in. Height; Right Side Replacement Filter For Performance Intake Kit [PN63-3090]
- This unique universal air filter is lightweight. Its carbon fiber top and flange provides outstanding strength with minimal weight. The smooth; glass like appearance provides the ultimate in finish; fit; and function.
- Universal Air Cleaner Assembly
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Flange Length: 2.125 In. (54mm)
- Flange Offset: 0.938 In. (24mm)
- WARNING CA Proposition 65: Yes
- Top Outside Length: 6.375 In. (162mm)
- Item Weight: 1.700 Lbs. (0.8 Kg)
- Machine Washable: Yes
- Product Box Height: 7.750 In. (197mm)
- Filter Material: Cotton Gauze
- Product Box Width: 10.380 In. (264mm)
- Product Box Length: 10.380 In. (264mm)
- Top Outside Width: 3.188 In. (81mm)
- Item Height: 7.000 In. (178mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: 1
- Top Style: Carbon Fiber
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Top Material: Carbon Fiber
- Flange Angle: 0 Degree
- CARB/Air Horn Diameter: N/a
- Base Outside Width: 5.500 In. (140mm)
- Shape: Oval Tapered
- Base Outside Length: 8.750 In. (222mm)
- Package Material: Paperboard
- Filter Re-Oiling Amount: 2.14 Oz (63 Ml)
- Flange Inside Diameter: 3.688 In. (94mm)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Flange Type: Centered
- Package Type: Box
-
Features:
- Designed To Increase Horsepower And Acceleration
- High Air Flow With Excellent Filtration
- Clamp-On Washable and Reusable Air Filter
- Malleable Flanges
- One Year Limited Warranty
- The RP-5285 Universal Air Filter is constructed from an oiled cotton filter media. It comes with a K&N embossed carbon fiber top and carbon fiber base for strength and durability. The carbon fiber element adds to the light-weight design and gives this filter a smooth glass like finish. The RP-5285 is a clamp-on filter that has an inside flange diameter of 3-11/16 inches. The base is 8-3/4 inches by 5-1/2 inches and the filter height is 7 inches.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | 376 |
Showing 1 - 8 of 8 products
Loading...